Sony MDRV6 Studio Monitor Headphones User Manual

Package Contents

• Sony MDRV6 Studio Monitor Headphones
• 3.5mm plug
• 1/4-inch adapter

Getting Started

1. Unbox the Sony MDRV6 Studio Monitor Headphones and check if all the components are present.
2. Inspect the headphones for any physical damage. If there is any damage, contact the seller or manufacturer for a replacement.

Connecting the Headphones

1. Plug the 3.5mm end of the headphone cord into the audio output jack of your audio source (e.g., smartphone, MP3 player, computer, etc.).
2. If your audio source has a 1/4-inch audio output jack, use the included 1/4-inch adapter by attaching it to the 3.5mm plug.
3. Adjust the headband and ear-cups for a comfortable fit.
4. Start playing audio on your audio source, and adjust the volume as needed.

Caring for Your Headphones

• When not in use, store the headphones in a cool, dry place.
• Avoid exposing the headphones to extreme temperatures, humidity, or direct sunlight.
• Do not use abrasive cleaners or solvents to clean the headphones. A soft, damp cloth is sufficient for cleaning.
• Do not attempt to disassemble or repair the headphones yourself. If you encounter any issues, contact the manufacturer or an authorized service center.

Troubleshooting Tips

• No sound or low volume: Check if the headphones are properly connected to the audio source. Ensure that the volume on the audio source is set at an audible level. If using the 1/4-inch adapter, make sure it is securely attached to the 3.5mm plug.
• Distorted sound: Lower the volume on your audio source. If the distortion persists, try using a different audio source to rule out issues with the original audio source.
• One side not working: Check the headphone cord for any damage or kinks. Try using a different audio source to rule out issues with the original audio source. If the issue persists, contact the manufacturer or an authorized service center for assistance.

Frequently Asked Questions

What is the difference between the Sony MDRV6 and MDR-7506 headphones?

While both headphones share a similar design and construction, the Sony MDRV6 has a slightly wider frequency response (5Hz - 30,000Hz) compared to the MDR-7506 (10Hz - 20,000Hz). This results in subtle differences in sound quality, with the MDRV6 potentially offering more detail in the audio.

Can I use these headphones with my smartphone or MP3 player?

Yes, the Sony MDRV6 headphones come with a 3.5mm plug that is compatible with most smartphones, MP3 players, and other portable audio devices. A 1/4-inch adapter is also included for use with home hi-fi systems or other audio equipment with a 1/4-inch audio output jack.

Are these headphones suitable for professional audio monitoring?

Yes, the Sony MDRV6 Studio Monitor Headphones are designed for professional audio monitoring, offering a wide frequency response, neodymium magnets, and 40mm drivers for powerful, detailed sound.

Do these headphones have noise-cancelling features?

The Sony MDRV6 headphones do not have active noise-cancelling technology. However, their over-ear design and oval ear-pads provide passive noise isolation, reducing external noises for an immersive listening experience.

Can I replace the ear pads on these headphones?

Yes, the ear pads on the Sony MDRV6 headphones can be replaced. Replacement ear pads can be purchased from the manufacturer or authorized dealers.

Q: What are the additional features of the Sony MDRV6 Studio Monitor Headphones?
A: The Sony MDRV6 Studio Monitor Headphones have a wide, adjustable, single, folding ear-cups headband, a 10 ft (3.0m) cord length, and a neodymium magnet. They also have a power handling capacity of 1.0W, an impedance of 63 ohms, and a frequency response of 5Hz - 30,000Hz.

Q: What is the connectivity technology of these headphones?
A: These headphones have a wired connectivity technology.

Q: What are the design features of these headphones?
A: The Sony MDRV6 Studio Monitor Headphones have an over-ear design that provides comfort and outstanding reduction of external noises. They also have oval ear-pads for extra isolation.

Q: What is the length of the cord that comes with these headphones?
A: The cord that comes with these headphones is approximately 10 feet (3.0m) long.

Q: Do these headphones have a true, flat sound or do they boost bass/highs/mids/anything?
A: According to some reviews, the output is not what some would consider flat. The boost to the bottom end is mild compared to other brands like Beats or V-Moda. However, they are still considered good enough for general listening and cueing things up during live events.

Q: Can you remove the cord and replace it if needed?
A: No, the cord is not detachable or replaceable in these headphones.

Q: Are these headphones comfortable to wear for long periods of time?
A: Yes, these headphones have a wide padded headband that distributes the weight over a wide area, reducing pressure and providing comfortable listening for hours on end.

Q: What is voice coil?
A: Voice coil is an electromagnet attached to the diaphragm or "cone" of a large or small speaker. The voice coil reacts to electrical impulses from the sound wave and moves the diaphragm, causing air pressure to push against the ear drum, which we hear as sound.

Q: Do these headphones come with a pouch to keep them in?
A: Yes, these headphones come with a nice quality vinyl bag with drawstring that says SONY on it, lower right corner.

Q: Which country makes these headphones?
A: The Sony MDRV6 Studio Monitor Headphones were originally made in Japan, then Thailand, then China (and Malaysia) after factory flooding in 2011, and now they are made in Thailand again.

Q: Is there a volume control on these headphones?
A: No, there is no external volume control on these headphones. The volume is controlled through the source of the music (ipod, ipad, stereo, etc.).