User Manual for Tripp Lite 600W 120V Power Conditioner (LS606M)

Product Overview

The Tripp Lite LS606M is a line conditioner designed to maintain a usable 120V nominal output to sensitive electronics during severe brownouts and overvoltages. It includes automatic voltage regulation (AVR), AC surge protection, and has 6 outlets for connecting multiple devices.

Setup Instructions

1. Place the power conditioner in a stable and secure location near your equipment.
2. Ensure that the total power draw of the connected devices does not exceed 600W/5A.
3. Connect the power conditioner to a standard AC wall outlet using the NEMA 5-15P plug.
4. Connect up to 6 electronic devices to the rear NEMA 5-15R outlets of the power conditioner.
5. Turn on the power switch of the power conditioner.
6. The LED indicators will illuminate to show that the power conditioner is functioning correctly and providing protection.

Operation

The LS606M automatically regulates voltage, correcting undervoltages as low as 85V and overvoltages up to 147V. It boosts input voltages below 102V by 13.4% and reduces input voltages above 130V by 10.4%. The unit also provides 720 joules of surge suppression.

Troubleshooting Tips

Device Not Powering On

Check that the power conditioner is properly plugged into the wall outlet and that the power switch is turned on.

Overload Condition

Disconnect some devices if the total power draw exceeds 600W/5A. The power conditioner may shut down to prevent damage.

LED Indicators Not Illuminating

Confirm that the power conditioner is receiving power and that no circuit breakers have been tripped.

Unit Emitting Noise

A small amount of noise is normal during operation. If the noise is excessive, contact technical support.

Frequently Asked Questions (FAQ)

Can this power conditioner support inductive loads?

While the LS606M can support some inductive loads, it may not be suitable for high inductive loads like large motors or pumps. It is recommended to connect such devices directly to a wall outlet or use a power conditioner with a higher capacity.

Does the unit have a right-angle plug?

No, the LS606M does not come with a right-angle plug. Ensure you have at least 3 inches of clearance for the plug and wire bend when installing.

Is the surge protection adequate for severe weather?

The LS606M provides 720 joules of surge protection, which is suitable for minor surges. For severe weather conditions, it is recommended to unplug sensitive equipment or use a dedicated surge protector with higher protection ratings.

How do I know if the unit is working?

The LED indicators on the unit will illuminate to show that it is providing power and protection. If the LEDs are off, ensure the unit is powered on and receiving electricity.

Can I use this power conditioner with my audio and video equipment?

Yes, the LS606M is ideal for protecting audio and video equipment from power irregularities and ensuring a consistent, clean power supply.

This HTML formatted user manual and troubleshooting guide provides a structured and easy-to-follow layout for users of the Tripp Lite 600W 120V Power Conditioner (LS606M). It includes setup instructions, a brief operational overview, troubleshooting tips, and answers to frequently asked questions based on customer reviews and product information.

FAQ [continued]

**Product FAQ: Tripp Lite 600W 120V Power Conditioner (LS606M)**

**Q: What is the purpose of the Tripp Lite LS606M Power Conditioner?**
A: The Tripp Lite LS606M is designed to maintain a usable 120V output to sensitive electronics during brownouts and overvoltages, prevent surges and spikes from damaging circuitry, filter out disruptive line noise, and provide automatic voltage regulation (AVR).

**Q: How many outlets does the LS606M have?**
A: The LS606M features 6 rear NEMA 5-15R outlets, allowing you to connect up to 6 electronic devices.

**Q: What are the key features of the Automatic Voltage Regulation (AVR) in this power conditioner?**
A: The AVR monitors incoming AC power, keeps equipment working through brownouts and overvoltages, corrects undervoltages as low as 85V and overvoltages up to 147V, boosts input voltages below 102V by 13.4%, and reduces input voltages above 130V by 10.4%.

**Q: Does the LS606M provide surge suppression?**
A: Yes, the LS606M offers 720 joules of network-grade surge suppression to protect against potentially harmful power surges and spikes.

**Q: What types of devices are ideal to connect to the LS606M?**
A: This power conditioner is suitable for computers, routers, modems, printers, home theater components, point-of-sale equipment, and other electronic devices that require stable power supply and protection against electrical disturbances.

**Q: Is the LS606M suitable for small load connections?**
A: Yes, customers have reported that this model works well for small load connections. It has been used successfully with devices like a 600-watt bass amp without issues.

**Q: Can the LS606M protect expensive audio and video equipment from power spikes?**
A: Yes, customers have found that the surge suppression capabilities of this power conditioner are effective in safeguarding expensive audio and video equipment from damage caused by power spikes.

**Q: Is the LS606M easy to use and reliable?**
A: Customers have reported that this power conditioner is simple to use, dependable, and provides consistent performance in stabilizing power supply for connected devices.

**Q: Does the LS606M have a compact design?**
A: Yes, the LS606M has a compact design with dimensions of 4.76 x 4.76 x 5.31 inches, making it space-efficient for various setups.

This FAQ aims to address common queries potential customers may have about the Tripp Lite LS606M Power Conditioner.

User Manual (PDF)

Specifications

Brand	Tripp Lite
Manufacturer	TRIPP LITE
Model Number	LS606M
Category	Electronics > Power Accessories > Line Conditioners
Product Dimensions	4.76 x 4.76 x 5.31 inches
Item Weight	4.2 pounds
ASIN	B00006B83G
Item model number	LS606M
Customer Reviews	4.5 4.5 out of 5 stars 277 ratings 4.5 out of 5 stars
Best Sellers Rank	#2 in Line Conditioners
Is Discontinued By Manufacturer	No
Date First Available	January 9, 2007
Language	English
Country of Origin	China
Weight	4.2 pounds
Dimensions	4.76 x 4.76 x 5.31 inches
First Available	January 9, 2007