LuxPRO FBA_PSP511LC Thermostat User Manual

Table of Contents

1. Installation
2. Programming
3. Adjusting Settings
4. Troubleshooting
5. Frequently Asked Questions

1. Installation

1. Turn off power to your heating and cooling system at the circuit breaker or fuse box.
2. Remove the old thermostat, but keep the wires connected. If necessary, label the wires to remember their connections.
3. Install the new LuxPRO FBA_PSP511LC Thermostat base on the wall, making sure it is level. Use the provided screws and anchors.
4. Connect the wires to the appropriate terminals on the thermostat base. Refer to the manufacturer's instructions for specific wiring information.
5. Insert 2 AA alkaline batteries into the thermostat.
6. Attach the thermostat faceplate to the base by snapping it into place.
7. Turn the power back on to your heating and cooling system.

2. Programming

1. Press the door on the front of the thermostat to access the programming buttons.
2. Press the "MODE" button to select the desired operation mode: Heat, Cool, or Off.
3. Press the "PROGRAM" button to enter the programming mode. The display will show the current day and time.
4. Use the "UP" and "DOWN" buttons to set the desired temperature for each period of the day (Morning, Day, Evening, and Night).
5. Press the "NEXT" button to move to the next day or period. Repeat the process for each day of the week and each period of the day.
6. Press the "PROGRAM" button again to exit the programming mode.

3. Adjusting Settings

1. Press the "MODE" button to switch between Heat, Cool, and Off modes.
2. Press the "FAN" button to toggle between Auto and On fan settings.
3. Press the "HOLD" button to temporarily override the programmed temperature. Press "HOLD" again to cancel the override and return to the programmed settings.
4. Press the "UP" and "DOWN" buttons to adjust the temperature when in override mode.
5. Press the "SWING" button to adjust the temperature swing setting in 0.25-degree increments.

4. Troubleshooting

1. If the thermostat is not functioning properly, check the batteries and replace them if necessary.
2. Ensure the thermostat is properly connected to the heating and cooling system.
3. Verify the thermostat is in the correct operation mode (Heat, Cool, or Off).
4. Check the programmed temperature settings to ensure they are accurate.
5. If the thermostat is still not working correctly, contact LuxPRO customer support for assistance.

5. Frequently Asked Questions

1. Q: Can the LuxPRO FBA_PSP511LC Thermostat be used with a heat pump system?
   A: Yes, it is compatible with heat pumps with up to 2-stage heat/1 stage cool.
2. Q: How do I change the temperature display from Fahrenheit to Celsius?
   A: Press and hold the "MODE" and "DOWN" buttons simultaneously for 3 seconds to switch between Fahrenheit and Celsius.
3. Q: Can I use this thermostat with a multi-stage gas or oil furnace?
   A: No, the LuxPRO FBA_PSP511LC Thermostat is not compatible with multi-stage gas or oil furnaces.
4. Q: How do I lock the keypad to prevent unauthorized use?
   A: Press and hold the "NEXT" and "HOLD" buttons simultaneously for 3 seconds to lock or unlock the keypad.
5. Q: How do I set the thermostat to display military time?
   A: Press and hold the "MODE" and "UP" buttons simultaneously for 3 seconds to switch between AM/PM and military time formats.

Product FAQ:

Q: Is the temperature swing adjustable?
A: Yes, you can adjust it from .5 to 3 degrees.

Q: Is the lowest number on the swing feature make the heater run more?
A: No, the smaller the swing, the more often it will run but for shorter times. The runtime and cost should be the same.

Q: Is this unit compatible with millivolt systems?
A: Yes, this thermostat can be used with most single stage 24v gas, oil, or electric heating and/or cooling systems, single stage heat pump or GAS MILLIVOLT systems.

Q: How many fan speeds does it have?
A: It has none other than on and auto.

Q: Can someone give me an "adjustable swing/differential" explanation for Dummies? I just don't understand how or when to use it...
A: The swing setting determines how closely the temperature will be controlled to the setpoint temperature. You can adjust it from +/- .25 F to +/- 2.25 F depending on your preference.

Q: Will the back light turn off automatically?
A: Yes, it turns off after a set period of time.

Q: Do you have to reprogram the thermostat after you change the batteries?
A: No, you do not have to reprogram it.

Q: Will this automatically adjust for daylight savings/standard time?
A: No, it does not automatically adjust for daylight savings/standard time.

Q: What is guaranteed if it stops working?
A: LuxPRO offers a standard one-year warranty.

Q: How easy is it to install without professional help or experience?
A: Installation is very easy and can be accomplished in less than 10 minutes with basic knowledge of wiring. However, if you are unsure about installation, it is recommended to seek professional help.

Response:
The LuxPRO PSP511LC thermostat is a versatile and reliable programmable thermostat that offers separate programming for heating and cooling, easy installation, and a user-friendly interface. With its adjustable swing setting, backlit display, and keypad lockout feature, this thermostat is an excellent choice for anyone looking to maximize their comfort and energy savings. It is compatible with most single-stage 24v gas, oil, or electric heating and/or cooling systems, as well as single-stage heat pump or GAS MILLIVOLT systems. However, it is not compatible with multi-stage heat pumps, multi-stage gas or oil furnaces, 3 wire hydronic systems, or 120V/240 line voltage systems (without transformers). The thermostat comes with a one-year warranty from LuxPRO. Installation is easy and can be done without professional help if you have basic knowledge of wiring. Overall, the LuxPRO PSP511LC thermostat is a great choice for anyone looking for a reliable and versatile programmable thermostat.