JBL Professional C1PRO High Performance 2-Way Professional Compact Loudspeaker System User Manual

Table of Contents

1. Package Contents
2. Installation
3. Connecting to an Amplifier
4. Troubleshooting Tips
5. Frequently Asked Questions

1. Package Contents

• 2 x JBL Professional C1PRO Compact Loudspeakers
• 2 x Variable Angle Wall Brackets
• User Manual

2. Installation

Before installing the JBL Professional C1PRO speakers, choose a suitable location that provides the best listening experience. The speakers can be wall-mounted using the included variable angle wall brackets, or placed on a shelf.

1. Attach the variable angle wall brackets to the back of each speaker using the provided screws.
2. Choose a suitable location on the wall and mark the positions for the wall bracket screws.
3. Drill holes at the marked positions and insert wall anchors if necessary.
4. Attach the wall brackets to the wall using appropriate screws.
5. Slide the speakers onto the wall brackets and adjust the angle as desired.
6. Tighten the bracket screws to secure the speakers in place.

3. Connecting to an Amplifier

Connect the JBL Professional C1PRO speakers to an amplifier using high-quality speaker cables. Ensure that the amplifier is turned off before making any connections.

1. Strip the ends of the speaker cables to expose approximately 1/2 inch (12mm) of bare wire.
2. Insert the stripped end of the speaker cable into the spring-loaded terminals on the back of each speaker. Make sure to connect the positive (+) terminal on the speaker to the positive (+) terminal on the amplifier, and the negative (-) terminal on the speaker to the negative (-) terminal on the amplifier.
3. Turn on the amplifier and adjust the volume to your desired level.

4. Troubleshooting Tips

1. If there is no sound, check that the amplifier is turned on and the speaker cables are properly connected.
2. If the sound is distorted, reduce the amplifier's volume or check the speaker cables for damage.
3. If you hear a hum or background noise, ensure that the amplifier and all connected devices are properly grounded.
4. If the sound is unbalanced, check the speaker placement and make sure they are at an equal distance from the listening position.

5. Frequently Asked Questions

Can I use these speakers with a powered amplifier?

Yes, the JBL Professional C1PRO speakers are passive and require an external amplifier for power. Make sure to choose an appropriate amplifier that matches the speaker's power handling capabilities.

Do these speakers have a built-in amplifier?

No, the JBL Professional C1PRO speakers are passive and require an external amplifier for power.

What is the recommended amplifier power for these speakers?

The JBL Professional C1PRO speakers have a peak power handling of 150 watts. Choose an amplifier that can provide a power output within this range for optimal performance.

Can I use these speakers as surround sound speakers for my home theater system?

Yes, the JBL Professional C1PRO speakers can be used as surround sound speakers in a home theater system. They can be wall-mounted using the included variable angle wall brackets for optimal positioning.

What is the difference between studio monitors and regular speakers?

Studio monitors, like the JBL Professional C1PRO, are designed for accurate sound reproduction with a flat frequency response. This allows musicians and audio engineers to hear the true sound of their recordings. Regular speakers, on the other hand, may have a colored sound that emphasizes certain frequencies for a more pleasing listening experience.

Q: Are they good as near-field studio monitors for home studio? Do they work with Denon DRA 500ae receiver?
A: These speakers are not recommended as primary studio monitors due to their weak/non-existent low bass response and less than flat mid-range. However, they can be used as an "alternative" to studio monitors and are good for mixing drums and bass. They work with the Denon DRA 500ae receiver.

Q: Are they self-powered? Can I just plug my phone in and jam?
A: No, these speakers are not self-powered. They need to be connected to an amplifier using a two-lead cable. You cannot plug your phone directly into the speakers.

Q: How do I install them?
A: If you have the brackets, you can use a drill to install them. However, be careful as the plastic is weak. It is recommended to use Skype if you need further assistance.

Q: What comes with the product?
A: The product includes only the speakers. You will need a power amp and possibly a board to plug your computer into.

Q: Are these speakers suitable for outdoor use considering they will be under a canopy and won't get wet?
A: These speakers are not rated for outdoor use but can be used for outdoor installations on a nice day when it isn't rainy.

Q: Can I connect this pair to a mixer and use as a PA system for conferences?
A: If it is a powered mixer, these speakers can be directly connected to it. Otherwise, you will need an amp. However, these speakers were not designed for use as a PA system.

Q: Do these speakers come with JBL Party Boost to attach to other JBL products with the JBL app?
A: No, these speakers are not equipped with JBL Party Boost or any other onboard tech. They need to be wired to an amplifier.

Q: Can these speakers be used outdoors?
A: These speakers are not rated for outdoor use but can be used for outdoor installations on a nice day when it isn't rainy.

Q: My amp puts out 90 watts @ 8 ohms per channel. Is the 150 watts for the pair or for each speaker?
A: The 150 watts is for the pair. However, it is recommended to get the 8 ohm version of these speakers if your amp is 8 ohms to avoid overheating.