Honeywell TH6110D1005 FocusPRO 6000 Programmable Thermostat User Manual

Table of Contents

1. Package Contents
2. Installation
3. Programming
4. Troubleshooting Tips
5. FAQs

1. Package Contents

• Honeywell TH6110D1005 FocusPRO 6000 Programmable Thermostat
• Mounting Hardware
• User Manual

2. Installation

1. Turn off power to your heating and cooling system at the main fuse or circuit breaker box.
2. Remove the old thermostat, but keep the wall plate with the wires attached.
3. Label the wires with the provided labels according to the terminal they are connected to on the old thermostat.
4. Remove the wall plate from the wall and install the new Honeywell wall plate using the provided screws.
5. Connect the labeled wires to the corresponding terminals on the new thermostat's wall plate.
6. Mount the thermostat on the wall plate by aligning the pins on the back of the thermostat with the terminal block on the wall plate and press firmly.
7. Insert the provided 2 AA batteries into the thermostat.
8. Turn the power back on to your heating and cooling system.

3. Programming

1. Press the "SET" button to enter the programming mode.
2. Press the "SCHED" button to set the schedule for weekdays (Monday through Friday).
3. Use the up and down arrows to set the desired temperature for the first time period (Wake).
4. Press the "TIME" button to set the start time for the first time period.
5. Repeat steps 3 and 4 for the remaining time periods (Leave, Return, Sleep) for weekdays.
6. Press the "SCHED" button again to set the schedule for weekends (Saturday and Sunday).
7. Repeat steps 3 and 4 for the time periods (Wake, Leave, Return, Sleep) for weekends.
8. Press the "RUN" button to exit programming mode and activate the programmed schedule.

4. Troubleshooting Tips

• If the thermostat is not turning on, check the batteries and ensure they are installed correctly.
• If the heating or cooling system is not working, check the wiring connections and ensure they are connected to the correct terminals.
• If the thermostat is not following the programmed schedule, ensure the schedule is set correctly and the thermostat is in "RUN" mode.
• If the thermostat is not maintaining the set temperature, check the temperature calibration settings and adjust if necessary.

5. FAQs

Can this thermostat be used in an RV?

Yes, this thermostat can be used in an RV, but you may need to research the wiring diagram for your specific air conditioning unit and make any necessary adjustments. Some Dometic Brisk Air units may require a control board replacement to be compatible with this thermostat.

Does the display light stay on?

No, the display light only turns on when a button is pressed and will turn off when not in use.

Do I need to use batteries if my HVAC system powers the thermostat?

No, you do not need to use batteries if your HVAC system powers the thermostat. Batteries can be used as backup power in case of a power outage.

How do I adjust the temperature without affecting the programmed schedule?

Press the up or down arrow buttons to adjust the temperature. This will temporarily override the programmed schedule until the next scheduled time period begins.

How do I change the time on the thermostat?

Press the "SET" button and use the up and down arrow buttons to adjust the time. Press the "RUN" button to save the new time setting.

Q: What are the features of the Honeywell TH6110D1005 FocusPRO 6000 Programmable Thermostat?
A: The Honeywell TH6110D1005 FocusPRO 6000 Programmable Thermostat has easy programming that takes only minutes, a clear, large, easy-to-read backlit display with soft-touch button interface, precise temperature control (+/- 1 degree F) with auto change from heat to cool, allows separate weekday/weekend programming with 4 different programs per day, and one-touch temperature control overrides program schedule at any time.

Q: What are the specifications of the Honeywell TH6110D1005 FocusPRO 6000 Programmable Thermostat?
A: The specifications of the Honeywell TH6110D1005 FocusPRO 6000 Programmable Thermostat are as follows:
- Brand: Honeywell
- Manufacturer: Honeywell
- Model Number: TH6110D1005/U
- Manufacturer Part Number: TH6110D1005
- Item Weight: 1.67 ounces
- Product Dimensions: 39.37 x 39.37 x 39.37 inches
- Item model number: TH6110D1005/U
- Batteries: 2 AA batteries required.
- Is Discontinued By Manufacturer: No
- Size: 1 Pack
- Color: White
- Shape: Curved
- Power Source: Battery Powered
- Item Package Quantity: 1
- Number Of Pieces: 1
- Type of Bulb: No
- Display Style: LCD
- Included Components: Honeywell Thermostat
- Batteries Included?: No
- Batteries Required?: Yes
- Battery Cell Type: Alkaline

Q: Does this product auto-switch between cool and heat?
A: Yes, this product can auto-switch between cool and heat. Just set the System to Auto.

Q: Can the Honeywell TH6110D1005 FocusPRO 6000 Programmable Thermostat be used with two heat and one cool?
A: No, the Honeywell TH6110D1005 FocusPRO 6000 Programmable Thermostat can only do 1 heat and 1 cool. For 2 heat and 2 cool, use the TH6220 model. For 3 heat and 2 cool, use the TH6320 model.

Q: Is there a warranty for the Honeywell TH6110D1005 FocusPRO 6000 Programmable Thermostat?
A: The warranty for the Honeywell TH6110D1005 FocusPRO 6000 Programmable Thermostat would depend on the seller or manufacturer. Please contact them directly for more information.

Q: How do you open the unit to change its batteries?
A: To change the batteries of the Honeywell TH6110D1005 FocusPRO 6000 Programmable Thermostat, press down on the battery compartment where it is marked "press," rotate it a little to the right, and pull the battery compartment out. Do not remove it from the wall.

Q: Can you pause the daily program easily in the event you are home unexpected time?
A: Yes, you can easily pause the daily program and manually adjust the temperature as needed.

Q: What is included in the package of the Honeywell TH6110D1005 FocusPRO 6000 Programmable Thermostat?
A: The package of the Honeywell TH6110D1005 FocusPRO 6000 Programmable Thermostat includes one Honeywell thermostat.