Definitive Technology ProMonitor 1000 User Manual

Table of Contents

1. Introduction
2. Package Contents
3. Speaker Placement
4. Connecting the Speakers
5. Mounting Options
6. Troubleshooting Tips
7. Frequently Asked Questions

1. Introduction

Welcome to the world of exceptional sound quality with the Definitive Technology ProMonitor 1000 2-Way Satellite or Bookshelf Speaker. This speaker is designed to provide you with an immersive home theater experience, delivering detailed audio and powerful bass.

2. Package Contents

• Definitive Technology ProMonitor 1000 Speaker
• Pre-installed Pedestal Foot
• Small Black Insert (for wall mounting)
• User Manual

3. Speaker Placement

For optimal performance, place the ProMonitor 1000 speakers at ear-level when seated. If using as standalone speakers in a 2.0 or 2.1 channel system, position them at an equal distance from your listening position, angled slightly inward. For a home theater setup, place the speakers as satellite surround speakers, following your specific home theater configuration guidelines.

4. Connecting the Speakers

1. Ensure your amplifier or receiver is turned off and unplugged from the power source.
2. Strip approximately 1/2 inch of insulation from the ends of your speaker wire.
3. Insert the stripped ends of the speaker wire into the binding posts at the back of the ProMonitor 1000 speaker. Connect the positive (+) wire to the red terminal and the negative (-) wire to the black terminal.
4. Tighten the binding posts to secure the speaker wire in place.
5. Connect the other end of the speaker wire to the appropriate speaker output terminals on your amplifier or receiver.
6. Repeat steps 2-5 for any additional speakers in your system.
7. Plug in and turn on your amplifier or receiver, and adjust the settings according to your specific setup.

5. Mounting Options

The ProMonitor 1000 includes a pre-installed pedestal foot for safe placement on a shelf or a ProStand (sold separately). For wall or ceiling mounting, use the rear-panel keyhole slot or the 1/4"-20 threaded insert on the back of the speaker. If wall mounting, remove the pre-installed pedestal foot and use the small black insert to cover the threaded connection at the bottom of the speaker.

6. Troubleshooting Tips

• If the speaker is not producing sound, ensure it is properly connected to your amplifier or receiver, and the correct input source is selected.
• Check the speaker wire connections at both the speaker and amplifier/receiver to ensure they are secure and connected to the correct terminals.
• If the sound is distorted or lacking in bass, try adjusting the settings on your amplifier or receiver, or reposition the speaker for optimal performance.

7. Frequently Asked Questions

Q: Can I use the ProMonitor 1000 speakers in a 5.1 or 7.1 home theater setup?

A: Yes, the ProMonitor 1000 speakers can be used as satellite surround speakers in your home theater setup. Combine them with a ProCenter 1000 center channel, a ProSub 1000 subwoofer, and additional ProMonitor 800 speakers for a complete home theater experience.

Q: What is the recommended power for the ProMonitor 1000 speakers?

A: The ProMonitor 1000 speakers have a recommended power range of 10-200 watts per channel, allowing for compatibility with a wide range of amplifiers and receivers.

Q: How do I clean the high gloss piano black finish?

A: To clean the high gloss finish, use a soft, lint-free cloth to gently wipe away dust and fingerprints. Avoid using harsh chemicals or abrasive materials as they may damage the finish.

Q: What is the size of the Definitive Technology ProMonitor 1000 speaker?
A: The ProMonitor 1000 speaker is 11 inches tall.

Q: What are the unique design features of this speaker?
A: The speaker features a perpendicular woofer and bass radiator, with an elliptical cabinet that reflects Definitive Technology's exemplary design engineering, capable of filling any room with three-dimensional surround sound.

Q: How can I use these speakers in my home theater setup?
A: You can use them as standalone speakers in a 2.0 channel system, or in a 2.1 channel system with a powered subwoofer, or as satellite surround speakers in your existing home theater setup.

Q: Can I create a full ProCinema 1000 system with these speakers?
A: Yes, with a ProCenter 1000 center channel, a ProSub 1000 Subwoofer and 4-8 ProMonitor 800 speakers, you can build an unbeatable home theater in your living room or bedroom.

Q: What are the multiple placement options for these speakers?
A: The included pedestal foot helps you safely place the speaker on a shelf or a ProStand (sold separately). For wall/ceiling mounting, use the rear-panel keyhole slot or a 1/4"-20 threaded insert on the back of the speaker.

Q: Are these speakers compatible with the Wstudio Microbar?
A: We paired this with a Definitive Procenter 1000 and it worked perfectly fine. However, we recommend wired units instead of wireless for better performance.

Q: Can I use an amplifier with these speakers?
A: Yes, you can. As long as the amplifier does not exceed the power rating of the speaker.

Q: Are these speakers sealed or ported?
A: These speakers are sealed.

Q: Can these speakers convert to Bluetooth?
A: No, these speakers do not have amplifiers or Bluetooth built-in; they have to be driven by an amplifier.

Q: How do the ProMonitor 1000 speakers compare to the ProMonitor 800s or 1000s?
A: The ProMonitor 100s sound less warm and less efficient than the 1000s for a similar volume setting. The ProCenter 2000 sounds good with the 1000s, especially for small rooms. However, the ProCenter 2000 when matched with the ProCenter C2 for a larger room sounds noticeably less voluminous.

Overall, customers have given positive reviews for these speakers, stating that they are exceptionally designed and provide detailed audio and exceptional sound quality with deep powerful bass. They are versatile in usage and can be used in various home theater setups. Multiple placement options are available, making it easier to place them on shelves or mount them on walls/ceilings.