Flipper Big Button Remote for Seniors, Elderly - User Manual

Table of Contents

1. Introduction
2. Getting Started
3. Setting Up the Remote
4. Programming Favorite Channels
5. Troubleshooting
6. Frequently Asked Questions

1. Introduction

The Flipper Big Button Remote is designed to be senior-friendly with large color-coded tactile buttons for easy use. This remote is perfect for caregivers, elderly loved ones with Dementia or Alzheimer's, or someone with low and impaired vision. It combines multiple remotes into one, making it the only remote you'll need for both your TV and Cable, Satellite or DTV box.

2. Getting Started

Before you start using your Flipper Big Button Remote, make sure you have the following items:

• Flipper Big Button Remote
• 2 AAA batteries (not included)

3. Setting Up the Remote

1. Insert two AAA batteries into the battery compartment on the back of the remote.
2. Turn on your TV and set-top box (STB).
3. Press the VOL button on the remote. If it works, proceed to step 4. If not, press and hold the TV button until the light turns solid, then enter the 4-digit code for your TV brand (test on/off and VOL).
4. If you do not have a STB, press and hold the TV button until the light turns solid, then enter 970.
5. Press the CH button on the remote. If it works, you are done. If not, press and hold the STB button until the light turns solid, then enter the 4-digit code for your STB (test on/off and CH).

4. Programming Favorite Channels

You can program up to 25 of your favorite channels for easy access.

1. Press the FAV button on the remote.
2. Enter the channel numbers of your favorite channels using the number buttons on the remote.
3. Press the FAV button again to save your favorite channels.

5. Troubleshooting

If you experience any issues with your Flipper Big Button Remote, try the following troubleshooting tips:

1. Make sure the remote is unlocked by pressing and holding the ADD button until the light turns solid, then enter 956. Repeat with the STB and TV buttons.
2. Reset the remote to factory settings by pressing and holding the ADD button until the light turns solid, then enter 954.
3. Follow the Simple Setup instructions in Section 3 again.

6. Frequently Asked Questions

Q: Will this remote work with my TV and set-top box?
A: The Flipper Big Button Remote works with all major TVs, cable, and satellite boxes. It is preset to work with common brands like LG, Vizio, Spectrum, Arris, Cisco, and others.

Q: How do I program my favorite channels?
A: Press the FAV button on the remote, enter the channel numbers of your favorite channels using the number buttons, and press the FAV button again to save your favorite channels.

Q: What should I do if the remote stops working?
A: First, check the batteries and make sure they are properly installed. If the problem persists, try unlocking the remote and resetting it to factory settings, then follow the Simple Setup instructions in Section 3 again.

Q: Can I use this remote with a soundbar?
A: Yes, the volume buttons on the Flipper Big Button Remote can be programmed to control a soundbar.

Q: How do I prevent accidental reprogramming?
A: The Flipper Big Button Remote features a slide panel that can be used to block out unwanted selections, preventing accidental reprogramming.

Q: What is the Flipper Big Button Remote for Seniors?
A: The Flipper Big Button Remote is a senior-friendly remote control designed to simplify TV viewing for seniors, elderly individuals, and those with low vision or impaired vision. It features large, color-coded tactile buttons for easy use and only has three functions: On/Off, Channel Up, Channel Down, Volume Up, Volume Down, and Mute.

Q: Can the Flipper Big Button Remote work with multiple devices?
A: Yes, the remote can be used for both your TV and Cable, Satellite or DTV box. It works for all major TVs and STBs available on the market like Xfinity, Spectrum, Dish, Direct TV, Tivo. Two remotes combined into one to make your viewing experience more convenient.

Q: Can you customize your content with the Flipper Big Button Remote?
A: Yes, you can easily program up to 25 of your favorite channels so you can get to the content you desire. Making it easy to cycle through your channels and eliminates the hassle of searching through hundreds of useless channels you’d never watch.

Q: Is there a special software feature in the Flipper Big Button Remote?
A: Yes, there is special software that prevents accidental reprogramming. The slide panel makes it easy to block out unwanted selections. Once you’ve set up all your favorite channels you won’t have to search for them again.

Q: What are the specifications of the Flipper Big Button Remote?
A: The product dimensions are 7 x 2.5 x 2 inches and it weighs 4 ounces. It requires 2 AAA batteries (not included) and uses Infrared connectivity technology. It is compatible with Televisions and has a Best Sellers Rank of #82 in Remote Controls.

Q: Does the Flipper Big Button Remote work with Amazon Fire Stick?
A: It can turn on an Insignia Fire TV and control the volume, but it won't do anything more. So it does work to an extent.

Q: Is the Flipper Big Button Remote compatible with Samsung Smart TV?
A: The Flipper Big Button Remote works well on many of the newer digital TVs, including Samsung Smart TVs. You get an instruction sheet with your purchase that details the setup procedures for programming.

Q: Can you use the same remote for a TV and Cable box?
A: Yes, the remote is intended for two devices, and the TV and Cable box is the most common combination. Instructions walk you through how to set them up together on the remote.

Q: Does the Flipper Big Button Remote work with Xfinity Cable in California?
A: Unfortunately, this remote does not work with the Xfinity cable box that was installed in Burlingame, California in December 2017. Xfinity said there is no remote like this one on the market that will work with their new cable box. It does work with older cable boxes.

Q: How do I modify the Flipper Big Button Remote so it only turns on/off my TV instead of both my TV and STB?
A: To modify the remote so that it only turns the TV on/off, you can press and hold ADD until the light turns solid, then enter 999 for TV only or 998 for TV and STB. This feature is available in the most recent version of the remote (V7).