Yamaha Audio NS-C210BL Center Channel Speaker User Manual

Table of Contents

1. Introduction
2. Package Contents
3. Installation and Placement
4. Connecting to an Amplifier/Receiver
5. Maintenance and Care
6. Troubleshooting Tips
7. Frequently Asked Questions

1. Introduction

Thank you for purchasing the Yamaha Audio NS-C210BL Center Channel Speaker. This high-quality speaker is designed to provide you with clear and precise audio, perfect for enhancing dialogue and sound effects in your home theater system. Please read this user manual carefully to ensure proper setup and installation.

2. Package Contents

• Yamaha Audio NS-C210BL Center Channel Speaker
• User Manual

3. Installation and Placement

For optimal performance, place the center channel speaker directly below or above your TV or projection screen. Ensure the speaker is level and securely positioned on a stable surface. Avoid placing the speaker in a cabinet or enclosed space, as this may cause the sound to become muffled or distorted. The speaker has a rear-firing bass port, so ensure there is adequate space behind the speaker for proper airflow.

4. Connecting to an Amplifier/Receiver

1. Turn off your amplifier/receiver and unplug it from the power source.
2. Locate the speaker terminals on the back of the NS-C210BL. There will be two terminals: one red (+) and one black (-).
3. Prepare your speaker wire by stripping approximately 1/2 inch (12mm) of insulation from the ends.
4. Insert the positive (+) speaker wire into the red terminal and the negative (-) speaker wire into the black terminal. Ensure the wires are securely connected.
5. Connect the other end of the speaker wire to the corresponding center channel speaker terminals on your amplifier/receiver.
6. Plug your amplifier/receiver back into the power source and turn it on.

5. Maintenance and Care

To keep your Yamaha Audio NS-C210BL Center Channel Speaker in optimal condition, follow these maintenance and care tips:

• Use a soft, dry cloth to clean the exterior of the speaker. Avoid using water or harsh chemicals, as they may damage the finish.
• Keep the speaker away from direct sunlight, extreme temperatures, and high humidity to prevent damage to the components.
• Ensure proper ventilation around the speaker to prevent overheating.

6. Troubleshooting Tips

1. If you experience no sound or distorted sound from the center channel speaker, check the connections between the speaker and the amplifier/receiver. Make sure the wires are securely connected to the correct terminals.
2. If the sound from the center channel speaker is muffled or unclear, ensure the speaker is not placed in an enclosed space or too close to a wall or other objects that may obstruct the rear-firing bass port.
3. If you are still experiencing issues with the center channel speaker, consult the troubleshooting section of your amplifier/receiver's user manual or contact Yamaha customer support for assistance.

7. Frequently Asked Questions

Q: Can I use this center channel speaker with a non-Yamaha amplifier/receiver?

A: Yes, the Yamaha Audio NS-C210BL Center Channel Speaker can be used with any amplifier/receiver that has a center channel speaker output.

Q: Is this speaker wall-mountable?

A: The NS-C210BL does not come with wall-mounting hardware, but it is designed for tabletop placement. If you wish to wall-mount the speaker, you may need to purchase additional mounting hardware separately.

Q: What is the recommended power range for this speaker?

A: The Yamaha Audio NS-C210BL Center Channel Speaker is designed to work with amplifiers/receivers that deliver 40-120 watts per channel.

Q: What type of speaker is the Yamaha Audio NS-C210BL?
A: The Yamaha Audio NS-C210BL is a 2-way bass reflex center speaker.

Q: What are the dimensions and weight of the speaker?
A: The product dimensions are 5.2 x 13.4 x 4.2 inches, and it weighs 4.4 pounds.

Q: Does it come with a warranty?
A: Yes, there is a limited warranty available when purchased from an authorized Yamaha dealer.

Q: Can the speaker be mounted to the wall?
A: Yes, it can be mounted flush to the wall using screws and keyhole type brackets.

Q: What is the sensitivity of the speaker in dbs?
A: The sensitivity of the speaker is not measured in dbs, but its impedance is 6 ohms.

Q: Is this a wireless speaker?
A: No, this is not a wireless speaker.

Q: Can this be used as a sound bar only?
A: No, this is a passive speaker that requires an audio component to drive it. It's intended to be used as part of a surround sound system.

Q: What are customers saying about this product?
A: Customers have praised the clear and balanced sound of the Yamaha Audio NS-C210BL, especially for dialogue in movies. Its slim design also matches well with flat panel TVs. Some have noted that it may produce boomy sound if placed too close to walls or in small rooms.