Polk Audio MC60 2-Way In-Ceiling 6.5" Speaker User Manual

Table of Contents

1. Introduction
2. Package Contents
3. Installation
4. Speaker Placement
5. Troubleshooting Tips
6. Frequently Asked Questions

1. Introduction

Thank you for choosing the Polk Audio MC60 2-Way In-Ceiling 6.5" Speaker. This speaker is designed to deliver dynamic built-in sound in any indoor or enclosed space, including bathrooms, kitchens, and patios. With its moisture-resistant design and rustproof stainless-steel hardware, the MC60 speaker is perfect for multi-zone audio systems and provides excellent ambient acoustic performance.

2. Package Contents

• 1 x Polk Audio MC60 In-Ceiling Speaker
• 1 x Perfect Fit Template
• 1 x User Manual

3. Installation

Step 1: Choose the desired location for your speaker and use the Perfect Fit template to trace the cutout on the ceiling.

Step 2: Carefully cut the hole using a drywall saw or similar tool, following the traced line.

Step 3: Remove any debris and insulation from the cutout area.

Step 4: Route the speaker wire through the cutout hole and connect it to the speaker terminals on the back of the MC60 speaker. Ensure that the positive (+) and negative (-) terminals on the speaker match the corresponding terminals on the wire.

Step 5: Carefully insert the MC60 speaker into the cutout hole, ensuring that the rotating cams are in the open position.

Step 6: Tighten the rotating cams using a screwdriver to secure the speaker in place. The speaker should be flush with the ceiling and free of any vibrations.

4. Speaker Placement

For optimal sound performance, follow these guidelines for speaker placement:

• Install the speakers at least 2 feet away from room corners and at least 6 feet apart from each other.
• For surround sound systems, install the speakers at an equal distance from the primary listening position.
• Angle the swivel tweeter towards the listening area for better sound coverage.

5. Troubleshooting Tips

1. No sound: Check the speaker wire connections and ensure they are securely connected to the speaker terminals.
2. Poor sound quality: Verify the speaker placement and adjust the swivel tweeter angle to improve sound coverage.
3. Vibrations or rattling: Ensure the rotating cams are tightened securely and the speaker is flush with the ceiling.

6. Frequently Asked Questions

Can I use this speaker for outdoor installations?

The MC60 speaker is designed for indoor and enclosed spaces. It is not recommended for direct outdoor installations.

Do I need an amplifier for this speaker?

Yes, the MC60 speaker requires an amplifier or receiver to power and drive the audio signal.

Is this speaker sold as a pair or individually?

The Polk Audio MC60 speaker is sold individually.

Can this speaker be installed in a wall instead of a ceiling?

Yes, the MC60 speaker can be installed in a wall following the same installation steps provided in this manual.

Q: What is the Polk Audio MC60 2-Way in-Ceiling 6.5" Speaker?
A: The Polk Audio MC60 2-Way in-Ceiling 6.5" Speaker is a single speaker designed to provide dynamic built-in sound for multi-zone audio systems. It is equipped with Dynamic Balance technology and superior components, including a 6.5" midrange and 0.75" aim-ready swivel tweeter, which provide smooth, wide-range response and clear, detailed highs.

Q: Where can I use this speaker?
A: You can use this speaker in any indoor or enclosed space, including bathrooms, kitchens, sunrooms, or covered porches. It has a moisture-resistant design featuring rustproof stainless-steel hardware and durable butyl rubber surrounds.

Q: How easy is it to set up this speaker?
A: It is easy to set up this speaker with its one-cut, drop-in installation using Perfect Fit templates, a precision flange, pre-construction brackets (sold separately), and rotating cams to secure the speaker and ensure vibration-free efficiency without any extra assembly.

Q: What is Polk's commitment to craftsmanship?
A: Polk has an unwavering commitment to reliability and craftsmanship that has made it one of the most trusted names in home audio. The company strives to bring out the best in surround sound systems and acoustic excellence, so you can sit back, relax and listen with your heart!

Q: Can this speaker be used as a center channel speaker?
A: While the Polk Audio MC60 2-Way in-Ceiling 6.5" Speaker is great for providing ambient acoustic performances with extraordinary detail and natural musicality at low volume levels, it may not be ideal for use as a center channel speaker since center speakers require plenty of highs and mids.

Q: How many speakers are included in the package?
A: The Polk Audio MC60 2-Way in-Ceiling 6.5" Speaker is sold as a single speaker.

Q: What is the impedance of this speaker?
A: The impedance of the Polk Audio MC60 2-Way in-Ceiling 6.5" Speaker is 8 ohms.

Q: Can this speaker be used in another country?
A: Yes, this speaker can be used in another country as long as it is connected to an amplifier since it is not a powered speaker.

Q: How do I swivel the tweeters on this speaker?
A: Unfortunately, the tweeters on the Polk Audio MC60 2-Way in-Ceiling 6.5" Speaker do not swivel.