Klipsch RC-62 II Center Speaker - Black (Each)
The Klipsch RC-62 II Center Speaker Black is a high-end choice in center channel design, delivering realistic, balanced home theater sound. Its highly efficient design produces mo…
Manual and instructions
Instruction-focused content generated from the current product data and source context.
Klipsch RC-62 II Center Speaker User Manual
Table of Contents
- Introduction
- Package Contents
- Speaker Placement
- Connecting the Speaker
- Troubleshooting Tips
- Frequently Asked Questions
1. Introduction
Thank you for purchasing the Klipsch RC-62 II Center Speaker. This high-end center channel speaker is designed to deliver realistic and balanced home theater sound, featuring highly efficient design, magnetically shielded drivers, an enhanced 1" titanium horn-loaded tweeter, and dual 6.5" high-output woofers. Please read this user manual carefully to ensure proper setup and use.
2. Package Contents
- Klipsch RC-62 II Center Speaker
- User Manual
3. Speaker Placement
For optimal performance, place the center speaker directly below or above your TV, aligned with the center of the screen. Ensure the speaker is placed on a stable surface, and make sure there is enough space to accommodate its dimensions (23.5 x 8 x 12.8 inches) and weight (30.8 pounds).
4. Connecting the Speaker
The Klipsch RC-62 II Center Speaker uses wired connectivity. Follow these steps to connect the speaker to your AV receiver or amplifier:
- Turn off your AV receiver or amplifier to avoid damage to the speaker or other components.
- Locate the speaker terminals on the back of the center speaker. There are two terminals: one red (+) and one black (-).
- Prepare your speaker wire by stripping the insulation from the ends, exposing about 1/2 inch of bare wire.
- Insert the bare end of the speaker wire into the appropriate terminal on the speaker. Ensure the positive wire connects to the red (+) terminal and the negative wire connects to the black (-) terminal.
- Tighten the terminal to secure the wire in place.
- Connect the other end of the speaker wire to the corresponding terminals on your AV receiver or amplifier. Ensure the positive wire is connected to the red (+) terminal and the negative wire is connected to the black (-) terminal.
- Turn on your AV receiver or amplifier and test the speaker for proper operation.
5. Troubleshooting Tips
If you encounter any issues with your Klipsch RC-62 II Center Speaker, try the following troubleshooting tips:
- Ensure all connections are secure and the speaker wire is properly connected to the corresponding terminals.
- Check your AV receiver or amplifier settings to make sure the center channel is enabled and set to the correct level.
- If you are experiencing distorted sound, reduce the volume on your AV receiver or amplifier and check the speaker wire for any damage or loose connections.
- If the speaker is not producing any sound, verify that the correct input source is selected on your AV receiver or amplifier.
6. Frequently Asked Questions
- Q: Is the Klipsch RC-62 II Center Speaker magnetically shielded?
- A: Yes, the speaker features magnetically shielded drivers to prevent interference with your TV.
- Q: Can I use this speaker with any AV receiver or amplifier?
- A: The Klipsch RC-62 II Center Speaker is compatible with most AV receivers and amplifiers. However, it is recommended to use a receiver or amplifier with sufficient power output to drive the speaker effectively.
- Q: What is the recommended speaker wire gauge for this speaker?
- A: A speaker wire gauge between 16 and 12 AWG is recommended for the Klipsch RC-62 II Center Speaker.
- Q: Can I mount this speaker on the wall?
- A: Due to its size and weight, wall mounting is not recommended for the Klipsch RC-62 II Center Speaker. It is designed to be placed on a stable surface, such as a shelf or speaker stand.
Frequently asked questions
Product FAQ:
Q: Will the Klipsch RC-62 II match well with my Dennon AVR-X4100W and Boston Acoustics SoundWareXS5.1B 5.1 speakers?
A: The Klipsch RC-62 II is a superb center speaker with high sensitivity that should improve sound from virtually any audio set-up, especially in home theater applications. Its sound is rich, dynamic and balanced, and blends in easily. However, it may be too large for some spaces so careful measuring is required.
Q: Does the speaker come with a grill?
A: Yes, the Klipsch RC-62 II comes with a magnetically attaching top-quality grill that is easy to attach and detach.
Q: Can I use the Klipsch RC-62 II as a center speaker with my Onkyo 7.1 system and BIC DV64 tower speakers?
A: Yes, the Klipsch RC-62 II will provide clearer sound as a center speaker and improve your overall audio experience.
Q: Would the RP-450c be a good match for my F 82 II speakers?
A: Yes, the RP-450C would make a good set with the RF-82 speakers.
Q: Are these appropriate for a bookshelf type enclosure in my TV stand? Is that what front-firing means?
A: Front firing means the speakers face towards you, as opposed to back, side, or down. The Klipsch RC-62 II is a center channel speaker and may be too large for a bookshelf type enclosure.
Q: Can I hook this speaker to an HK AVR 1710 without any problem? Or should I get the RC52?
A: You should have no problems with this speaker matching up with any system you have. The Klipsch RC-62 II is an excellent choice and a better option than the RC52.
Q: How would it pair with my Yamaha Aventage RX880 and Klipsch 620F or 820F fronts?
A: The Klipsch RC-62 II would sound great with any audio setup, including the Yamaha Aventage RX880 and Klipsch 620F or 820F fronts.
Q: Can I use the Klipsch RC-62 II as a center speaker with my RP-160M fronts?
A: Yes, the Klipsch RC-62 II would be a good match for your RP-160M fronts.
Q: Does the speaker have Bluetooth?
A: No, the Klipsch RC-62 II is not a Bluetooth speaker. It is meant to be wired and used as a center channel in a surround sound system.
Response to Product Reviews:
The Klipsch RC-62 II is a top-quality center channel speaker that delivers realistic, balanced home theater sound. Its highly efficient design produces more output using less energy, and its magnetically shielded drivers prevent TV interference. The enhanced 1" titanium horn-loaded tweeter and dual 6.5" high-output woofers provide excellent sound quality. Customers have rated this product 4.7 out of 5 stars and given positive feedback on its performance. Some customers have also recommended pairing it with other Klipsch speakers for an optimal audio experience. However, some customers have expressed concerns about the size and weight of the speaker, which may not be suitable for all spaces. Overall, the Klipsch RC-62 II is an excellent product that provides great value for its price.
Specifications
Structured product details pulled from the latest available product data.
| Brand | Klipsch |
|---|---|
| Manufacturer | Klipsch |
| Model Number | 1011863 |
| Category | Electronics > Home Audio > Speakers > Center-Channel Speakers |
| Color | Black |
| Weight | 30.8 pounds |
| Dimensions | 12.8"D x 23.5"W x 8"H |
| First Available | August 27, 2010 |
| Mounting Type | Shelf Mount |
| Model Name | RC-62 II |
| Speaker Type | Center Channel, Woofer |
| Special Feature | Bass Boost, Radio, Stereo Pairing |
| Recommended Uses For Product | For Surround Sound Systems |
| Compatible Devices | Laptop, Projector, Smartphone, Tablet, Television |
| Subwoofer Diameter | 6.5 Inches |
| Surround Sound Channel Configuration | 5.1 |
| Included Components | tiltable feet, beautiful wood-grain vinyl cabinet |
| Product Dimensions | 12.8"D x 23.5"W x 8"H |
| Item Weight | 14 Kilograms |
| Impedance | 8 Ohm |
| Is Waterproof | FALSE |
| Warranty Type | Limited |
| Number of Items | 1 |
| Control Method | Remote |
| Wireless Communication Technology | Bluetooth |
| Speaker Size | 6.5 Inches |
| Power Source | Corded Electric |
| Woofer Diameter | 6.5 Inches |
| Water Resistance Level | Not Water Resistant |
| Customer Package Type | Frustration-Free Packaging |
| Audio Driver Type | Dynamic Driver |
| Audio Driver Size | 6.5 Inches |
| Subwoofer Connectivity Technology | Wired |
| Includes MP3 player? | No |
| Series Number | 2 |
| Specific Uses For Product | Home Theatre |
| UPC | 743878021943 |
| Item Weight | 30.8 pounds |
| ASIN | B0040QS8R2 |
| Item model number | 1011863 |
| Customer Reviews | 4.7 4.7 out of 5 stars 374 ratings 4.7 out of 5 stars |
| Best Sellers Rank | #175,416 in Electronics (See Top 100 in Electronics) #70 in Center-Channel Speakers |
| Is Discontinued By Manufacturer | No |
| Date First Available | August 27, 2010 |
| Speaker Maximum Output Power | 150 Watts |
| Connectivity Technology | Wired |
| Audio Output Mode | Stereo |
| Input Voltage | 2.83 Volts |
Use this page carefully
ProductReviewGPT pages are AI-assisted summaries. When a source document is available, it should take priority over the generated summary for important operating, warranty, safety, or compliance details.