Sena SPH10H-FM-01 Motorcycle Bluetooth Stereo Headset and Intercom User Manual

Package Contents

• 1 x Sena SPH10H-FM-01 Bluetooth Stereo Headset and Intercom
• 1 x Clamp Unit
• 1 x Microphone
• 1 x USB Power Cable
• 1 x Cigarette Charger
• 1 x User Manual

Getting Started

1. Charge the headset using the included USB power cable or cigarette charger. The red LED will turn off when the headset is fully charged.
2. Attach the clamp unit to your half helmet by sliding it onto the helmet shell.
3. Connect the headset to the clamp unit by aligning the grooves and sliding the headset into place.
4. Adjust the microphone position so it is close to your mouth for optimal sound quality.

Pairing with a Bluetooth Device

1. Turn on the headset by pressing and holding the Jog Dial and Phone Button for 1 second.
2. Enter pairing mode by pressing and holding the Jog Dial for 5 seconds. The blue and red LEDs will flash alternately.
3. On your Bluetooth device, search for nearby Bluetooth devices and select "Sena SPH10H-FM" from the list.
4. Confirm the pairing on your Bluetooth device. The headset will beep and the blue LED will flash slowly to indicate a successful connection.

Using the Intercom

1. Pair your headset with another Sena SPH10H-FM headset following the steps in the "Pairing with a Bluetooth Device" section.
2. To start an intercom conversation, press the Jog Dial on your headset. The connected headset will hear a beep and the intercom will be activated.
3. To end the intercom conversation, press the Jog Dial again.

Listening to FM Radio

1. Press and hold the Phone Button for 1 second to activate the FM radio.
2. Rotate the Jog Dial to change the radio frequency. Press the Jog Dial to save the current frequency as a preset station.
3. Press and hold the Phone Button for 1 second to turn off the FM radio.

Troubleshooting Tips

• If the headset is not turning on, ensure it is fully charged and the power button is pressed and held for 1 second.
• If you are experiencing poor sound quality or wind noise, adjust the microphone position so it is closer to your mouth and ensure the windsock is properly covering the microphone.
• If the headset is not pairing with your Bluetooth device, ensure both the headset and the device are in pairing mode and within range of each other.
• If you are experiencing issues with the intercom, ensure both headsets are paired and within range of each other.

Frequently Asked Questions

What is the battery life of the Sena SPH10H-FM-01?

The headset has a talk time of up to 7 hours and a standby time of up to 6 days.

Is the Sena SPH10H-FM-01 compatible with non-Sena Bluetooth devices?

Yes, the headset uses universal Bluetooth connectivity and can be paired with other Bluetooth devices such as smartphones and GPS units.

Can I use my own earbuds with the Sena SPH10H-FM-01?

The headset does not come with a built-in option to plug in personal earbuds. However, some users have modified their headsets by soldering a 3.5mm headset jack to the speaker wires and connecting their earbuds.

What is the range of the intercom feature?

The intercom feature has a range of up to 0.5 miles (0.8 kilometers) in optimal conditions.

How do I update the firmware on my Sena SPH10H-FM-01?

You can update the firmware using the Sena Device Manager software available on the Sena website. Note that some users have reported issues with the software, and the last firmware update for this model was released several years ago.

Q: What is the talk time and stand-by time of the Sena SPH10H-FM-01 Motorcycle Bluetooth Stereo Headset and Intercom?
A: The talk time is 7 hours and the stand-by time is 6 days.

Q: Is the product compatible with all helmet types?
A: The product has a universal fit type, but it is specifically designed for half helmets.

Q: Does the package include an AUX port for non-Bluetooth stereo audio devices?
A: No, the SPH10H-FM does not include an AUX port.

Q: Is there an antenna attached to the headset for FM radio reception?
A: No, there is no antenna attached. The wires that go from the left to the right earphones are the antenna, so it is recommended to tuck them under your liner as loosely as possible to improve reception.

Q: Can this headset be used for paramotoring?
A: Yes, it can be used for paramotoring. It can receive Garmin commands, phone functions, Google Maps, and other audio alerts.

Q: Can two people pair their headsets to the same phone and listen to the same music?
A: Yes, they can.

Q: Is there a 3.5mm jack adapter included for earbuds?
A: No, there is no 3.5mm jack adapter included.

Q: Can this unit be paired with other Bluetooth units from different brands for intercom communications?
A: Yes, any Bluetooth-to-Bluetooth pairing is possible.

Q: How many units come in one order?
A: One unit comes in one order.

Q: Is the intercom voice-activated or manual button-activated?
A: The intercom conversation needs to be initiated by manually pushing a button on one of the headsets. After that, you can talk back and forth without pushing anything.

Customer Reviews:
- Many customers have found the Sena SPH10H-FM-01 to be a great intercom headset for half helmets, with easy setup and use.
- Some customers have reported wind noise from the passenger mic at high speeds, but overall they can still hear each other fine.
- A few customers recommend wearing a heavy mask over the mic to reduce wind noise.
- One customer found installation to be difficult on a Bell half helmet and had to return the product.
- Some customers have reported issues with the FM radio volume being too loud or not having enough bass response for music.
- However, many customers recommend this product for its features such as GPS directions, phone, intercom, and music capabilities without wires.