Technics EAH-AZ60-K True Wireless Earbuds User Manual

Table of Contents

1. Initial Setup and Pairing
2. Touch Controls
3. Noise Cancelling and Ambient Modes
4. Multi-Point Connectivity
5. Battery Life and Charging
6. Troubleshooting Tips
7. Frequently Asked Questions

1. Initial Setup and Pairing

To set up your Technics EAH-AZ60-K True Wireless Earbuds, follow these steps:

1. Charge the earbuds in their case until fully charged.
2. Remove the earbuds from the charging case.
3. Enable Bluetooth on your device.
4. Select "EAH-AZ60" from the list of available devices for pairing.
5. If prompted for a passkey, input "0000" (four zeros).

2. Touch Controls

Your Technics EAH-AZ60-K earbuds feature touch controls that allow you to manage your music, calls, and noise cancelling settings. Consult your User Guide for a full list of touch controls, including:

• Play/Pause
• Voice Assistant
• Receive/Reject Call
• Track Forward/Back
• Turn Earbuds On/Off
• Noise Cancelling and Ambient Sound

3. Noise Cancelling and Ambient Modes

To eliminate ambient noise and enjoy a more immersive listening experience, follow these steps:

1. Ensure the earbuds are snug in your ears. Try different sizes of earpieces to find the best seal.
2. Touch and hold the touch sensor (R) for 2 seconds to toggle between noise cancelling, ambient sound, and off.

4. Multi-Point Connectivity

Your Technics EAH-AZ60-K earbuds can connect to more than two Bluetooth devices at once, allowing you to switch seamlessly between devices. To connect additional devices, follow the initial setup and pairing process for each device. To switch between devices, use the device settings or the Technics audio app.

5. Battery Life and Charging

The Technics EAH-AZ60-K earbuds have a battery life of up to 7 hours, with an additional 24 hours of charge provided by the case. To charge the earbuds, simply place them in the charging case. The earbuds will automatically charge when placed in the case.

6. Troubleshooting Tips

If you experience any issues with your Technics EAH-AZ60-K earbuds, try the following troubleshooting tips:

1. Ensure the earbuds are fully charged.
2. Check that your device's Bluetooth is enabled and properly paired with the earbuds.
3. Reset the earbuds by placing them in the charging case and then removing them.
4. Consult the Operating Instructions for additional troubleshooting guidance.

7. Frequently Asked Questions

How do I do the initial setup of the earbuds and connect them to a device?

Follow the steps outlined in Section 1 of this user manual for initial setup and pairing.

Can I switch my connection from one Bluetooth device to another?

Yes, once you pair your AZ60 earbuds to your devices via Bluetooth, you can connect to your devices through the device settings or through the Technics audio app.

How do I utilize Touch Controls?

Consult Section 2 of this user manual for information on using touch controls.

How do I eliminate ambient noise?

Follow the steps outlined in Section 3 of this user manual to eliminate ambient noise using noise cancelling and ambient modes.

Why does one earbud have better battery life than the other?

The earbud that is removed from the case first starts the Bluetooth pairing process with your devices, which may result in a slightly shorter battery life.

Q: How do I connect the Technics True Wireless Earbuds to a device?
A: Once the earbuds are charged, enable Bluetooth on your device and select “EAH-AZ60” for pairing. If prompted for a passkey, input “0000” (four zeros).

Q: Can I switch my connection from one Bluetooth device to another?
A: Yes! Once you pair your AZ60 earbuds to your devices via Bluetooth, you can connect to more than 2 Bluetooth devices at once through the device settings or Technics audio app.

Q: How do I utilize touch controls?
A: Consult your User Guide for a full key of Touch Controls, including play/pause, voice assistant, receive/reject call, and track forward/back. You can also use touch control for turning the AZ60s on/off, noise cancelling, and ambient sound.

Q: How do I eliminate ambient noise?
A: Make sure ear buds are snug in your ears. Try every size earpiece and make sure the seal is secure by turning a small amount back and forth. Touch and hold the touch sensor (R) for 2 seconds to rotate between noise cancelling, ambient sound, and off.

Q: Why does one earbud have better battery life than the other?
A: The earbud that is removed from the case first starts the Bluetooth pairing process with your devices which may result in slightly shorter battery life.

Q: Why is one of the earbuds quieter than the other?
A: Raise the volume on your Bluetooth device, not just on the earphones. Try different sized earpieces to ensure a proper fit. Clean any foreign material on the mesh of the unit using instructions in the Technics Audio Connect app.

Q: Why does noise cancelling not work well?
A: Ensure a proper fit by trying different sized earpieces and twisting the earbuds back and forth until they are snug in your ears. Use touch controls to switch between noise cancelling and ambient sound. Optimize noise cancelling reduction using the Technics Audio Connect app.