Natural Chemistry 00080 Phosphate Test Kit N/C User Manual

Introduction

The Natural Chemistry 00080 Phosphate Test Kit N/C is a simple and effective way to measure phosphate levels in your pool or spa water. High phosphate levels can lead to algae growth and other water quality issues. This user manual will guide you through the process of using the test kit and provide troubleshooting tips and frequently asked questions.

Package Contents

• Phosphate Test Kit N/C
• Test strips
• Test tube with cap

Instructions for Use

1. Fill the test tube with water from your pool or spa, up to the marked line.
2. Insert the test strip into the cap, folding it in half so that it fits snugly.
3. Place the cap with the test strip onto the test tube, ensuring a tight seal.
4. Invert the test tube five times, allowing the water to mix with the test strip.
5. Remove the cap and test strip from the test tube.
6. Compare the color of the water in the test tube to the color chart on the test strip container to determine the phosphate level.
7. Discard the used test strip and rinse the test tube and cap with clean water before storing.

Troubleshooting Tips

• If you are having difficulty removing the test strip from the cap after testing, use a paper clip or toothpick to help extract it.
• If the color of the water is difficult to read or appears translucent, ensure that you are inverting the test tube five times and using the correct amount of water.
• If you are unsure about the duration of time the test strip should be in the water, use approximately 10 to 20 seconds for flipping the tube five times.
• For optimal results, store the test kit in a cool, dry place and use the test strips before their expiration date.

Frequently Asked Questions

Q: How long should the test strip be in the water?

A: The test strip should be in the water for approximately 10 to 20 seconds while flipping the tube five times.

Q: What should I do if the color is difficult to read or appears translucent?

A: Ensure that you are inverting the test tube five times and using the correct amount of water. If the issue persists, try testing again with a new test strip.

Q: What is the optimal phosphate level for my pool or spa?

A: The optimal phosphate level for a pool or spa is typically below 100 ppb (parts per billion). Consult your pool or spa manufacturer or a professional for specific recommendations.

Q: How do I correct high phosphate levels?

A: To correct high phosphate levels, use a phosphate remover or consult a pool or spa professional for guidance on the appropriate treatment.

Q: How long will the test strips last?

A: The test strips have an expiration date, which can be found on the container. It is recommended to use the test strips before their expiration date for accurate results.

Product: Natural Chemistry 00080 Phosphate Test Kit N/C - Garden & Outdoor

Specifications:
- Brand: Natural Chemistry
- Manufacturer: National Security Drone
- Model Number: 00080
- Category: Garden & Outdoor > Industrial & Scientific > Professional Medical Supplies > Diagnostics & Screening > Laboratory Diagnostics > Clinical Diagnostic Test Kits
- Product Dimensions: 1 x 1 x 1 inches
- Item Weight: 4 ounces
- ASIN: B00HEAS7JA
- Item model number: 00080
- Customer Reviews: 4.5 out of 5 stars (224 ratings)
- Best Sellers Rank: #19,615 in Industrial & Scientific
- Is Discontinued By Manufacturer: No
- Weight: 4 ounces
- Dimensions: 1 x 1 x 1 inches

FAQ:
Q: How high part per billion (PPB) do these strips test up to?
A: The test range for these strips is 0-2500 PPB. The recommended phosphate level should be as close to 0 as possible and at least below 500.

Q: If using phosfree product in pool is this the only water test strip you need or do I need further water testing?
A: While this product is the only one needed to test for phosphates, it is recommended to test for other levels such as chlorine, pH, alkalinity, etc.

Q: How long should you wait between inversions?
A: There is no waiting time required. Invert the tube slowly five times.

Q: Why is it "prime" when the order takes weeks to arrive!? I cancelled due to this issue.
A: Shipping may be "Prime", but once the order is filled, it may take some time to locate supply if they are out of stock.

Q: Its says the kit is designed to last. How long does it last?
A: The kit contains 100 strips and can last up to 2 years if used once a week. It is important to keep the package sealed when not in use and only touch the strip you will be using.

Q: Does this test total phosphates?
A: Yes, it tests total phosphates in the range of 0 - 2500 ppb. If your phosphate concentration is higher than 2500 ppb, then this test kit wouldn't be appropriate for your needs.

Q: What are the lowest 2 levels?
A: The available ranges shown on the side of the container are: 0, 100, 200, 300, 500, 1000, 2500 ppb (parts per billion).

Q: What is the current expiration date on this kit (100 ct)?
A: The expiration date may vary depending on when it was purchased. One customer reported an expiration date of November 2018 for a kit purchased in June of 2017.

Q: Does it come with the test tube?
A: It is supposed to come with a test tube, but some customers have reported that it was excluded from their shipment.

Customer Reviews:
- GREAT TEST. WORKS. TOO COSTLY. COULD BE SIMPLER TO USE.
- The test strips appear to be working fine; However
- Excellent product, large number of strips.
- Works like a charm
- Easy to use
- Difficult to read, limited instruction
- Must buy
- Good deal.