Enerzen Ozone Generator 60,000mg User Manual

Instructions for Use

1. Ensure that the area to be treated is unoccupied. Remove all people, pets, and plants from the space.
2. Place the Enerzen Ozone Generator in a central location in the room or area you wish to treat.
3. Plug the unit into an appropriate electrical outlet.
4. Turn the mechanical timer knob to the desired duration for ozone generation. Note: There is no delay, so be prepared to leave the area immediately upon starting the unit.
5. Exit the space and keep the area sealed. Do not allow anyone to enter the treated area during this time.
6. After the timer has finished, wait an additional 30 minutes to 4 hours to allow the ozone to revert back to breathable air.
7. Air out the room by opening windows and doors to allow fresh air to circulate and expedite the dissipation of residual ozone.

Troubleshooting Tips

• Unit does not start: Check to ensure the unit is plugged in and the electrical outlet is functioning.
• Unusual noise during operation: Make sure the unit is on a stable surface and that nothing is obstructing the air intake or exhaust.
• Reduced ozone output: Clean the ozone plates according to the manufacturer's instructions to ensure optimal performance.
• Distinctive smell persists: Ensure the treated space is adequately aired out after treatment, and consider running additional treatment cycles if necessary.

Frequently Asked Questions

Is the Enerzen Ozone Generator safe to use around pets and plants?

No, the Enerzen Ozone Generator should not be used in the presence of people, pets, or plants. They must be removed from the area before starting the ozone generation process.

How long should I wait before re-entering the treated area?

After the ozone generation cycle is complete, wait a minimum of 30 minutes to 4 hours before re-entering the area. Ensure proper ventilation by airing out the space before re-occupancy.

Can the Enerzen Ozone Generator eliminate strong odors like cigarette smoke?

Yes, the Enerzen Ozone Generator is effective at eliminating strong odors, including cigarette smoke, by reacting with odor-causing molecules.

How often should I run the ozone generator?

The frequency of use depends on the severity of the odors and the size of the area. Start with a single treatment and assess the results before deciding on additional treatments.

Can I use the Enerzen Ozone Generator in my car?

Yes, the generator can be used to treat odors in cars. Ensure the car is unoccupied and aired out properly after treatment.

Does the unit come with a UK plug?

Yes, the unit comes with a UK plug. If you are using it in a country with different outlets, you will need an appropriate adapter or a replacement cable with the correct plug type for your region.

This HTML document provides a structured user manual for the Enerzen Ozone Generator 60,000mg, along with troubleshooting tips and a formatted FAQ section. The document uses basic HTML tags for structure and includes inline CSS styling for emphasis on warnings.

FAQ [continued]

**Product FAQ: Enerzen Ozone Generator 60,000mg Industrial O3 Air Purifier Deodorizer (60,000mg - Black)**

**Q: What is the primary function of the Enerzen Ozone Generator 60,000mg?**
A: The Enerzen Ozone Generator 60,000mg is designed to eliminate odors in the air, water, fabrics, and walls by reacting with them to remove the odors instead of masking them.

**Q: What are some common uses for this ozone generator?**
A: Common uses include deodorizing cars, boats, dumpsters, kitchens, bathrooms, basements, flood and fire affected areas, as well as eliminating cooking, smoking, pet, "musty", or general odors.

**Q: Is the Enerzen Ozone Generator 60,000mg easy to operate?**
A: Yes, the operation is straightforward. Simply turn the timer knob to set the desired time for ozone generation. Once the process is complete, allow an additional 30 minutes for any residual ozone to revert back to breathable air.

**Q: Are there any safety precautions that need to be followed when using this ozone generator?**
A: Yes, it is important to note that all ozone generators should be operated in unoccupied spaces only. Remove people, pets, and plants from the area being treated. After ozone generation is complete, wait at least 30 minutes before reoccupying the space. It is also recommended not to use this product in California.

**Q: Can you provide some details about the design and specifications of this product?**
A: The Enerzen Ozone Generator 60,000mg features a mechanical timer for easy use and has a noise level of 30 dB. It comes in a black color variant and has product dimensions of 6.75"D x 8"W x 5.75"H. The unit is CE Certified and has a high capacity of 60,000 mg/h for effective odor removal.

**Q: Is this product suitable for use in homes with persistent odors like cigarette smoke or mold?**
A: Yes, many users have reported successful odor elimination with this ozone generator. It has been effective in removing stale smoke odors and mold smells from various spaces like basements and bathrooms.

**Q: How long does it take for the ozone to dissipate after using this generator?**
A: The time required for ozone to revert back to breathable air depends on the amount of ozone generated. It is generally recommended to wait at least 4 hours after using the generator before reoccupying the treated space.

**Q: Does this unit have any additional benefits besides odor removal?**
A: In addition to eliminating odors, users have reported that this ozone generator can help in getting rid of insects like bugs and spiders. It has also been effective in removing pet litter odors and musty smells from basements.

Please note that proper caution should be exercised when using ozone generators due to their potential harm to living organisms.

Specifications

Brand	Enerzen
Manufacturer	Enerzen
Model Number	O-777
Category	Home & Kitchen > Heating, Cooling & Air Quality > Air Purifiers > Air Ionizers
Is Discontinued By Manufacturer	No
Product Dimensions	8 x 6.75 x 5.75 inches; 5 Pounds
Item model number	O-777
Date First Available	March 27, 2014
ASIN	B00JAP7388
Country of Origin	China
Color	Black - 60,000 mg/h
Product Dimensions	6.75"D x 8"W x 5.75"H
Specification Met	CE Certified
Noise Level	30 dB
Best Sellers Rank	See Top 100 in Home & Kitchen
Dimensions	6.75"D x 8"W x 5.75"H
First Available	March 27, 2014