SABRENT 4-Port USB 3.0 Hub User Manual

Table of Contents

1. Introduction
2. Package Contents
3. Getting Started
4. Connecting Devices
5. LED Indicators and Power Switches
6. System Requirements
7. Troubleshooting Tips
8. Frequently Asked Questions

1. Introduction

The SABRENT 4-Port USB 3.0 Hub (HB-UM43) is a compact and convenient solution for expanding your computer's USB capabilities. With this hub, you can easily connect up to four USB devices, such as flash drives, external hard drives, keyboards, mice, and more. The hub is compatible with USB 3.0, 2.0, and 1.1 devices and supports transfer speeds of up to 5Gbps.

2. Package Contents

• SABRENT 4-Port USB 3.0 Hub (HB-UM43)
• 2 ft Extended USB 3.0 Cable
• User Manual

3. Getting Started

No driver installation is required for the SABRENT 4-Port USB 3.0 Hub. Simply plug the included 2 ft USB 3.0 cable into an available USB port on your computer and the hub will be ready for use.

4. Connecting Devices

To connect a USB device to the hub, simply plug the device's USB connector into one of the four available USB ports on the hub. The hub supports hot swapping, allowing you to connect and disconnect devices without powering down your computer.

5. LED Indicators and Power Switches

Each USB port on the hub has an individual LED indicator and power switch. The LED indicators display the power status for each port, and the power switches allow you to easily control the connection of your devices. To connect a device, press the power switch for the corresponding port. To disconnect a device, press the power switch again.

6. System Requirements

The SABRENT 4-Port USB 3.0 Hub is compatible with the following operating systems:

• Windows 11
• Windows 10
• Windows 8.1/8
• Windows 7
• Windows Vista
• Windows XP
• Windows 2000
• Linux
• Mac OS 8.6 or above

7. Troubleshooting Tips

If you experience issues with the SABRENT 4-Port USB 3.0 Hub, try the following troubleshooting tips:

1. Ensure the hub is connected to a USB 3.0 port on your computer for optimal performance.
2. Check that the devices connected to the hub do not exceed a combined current of 5 volts 900 mAh. External hard drives should be connected to an external power source.
3. For a stable connection, avoid using 2.4Ghz wireless devices, such as wireless keyboard and mouse adapters, in close proximity to the hub. Connecting to a USB 2.0 port is recommended in this case.
4. Restart your computer and reconnect the hub if you experience issues with device recognition.

8. Frequently Asked Questions

Does the SABRENT 4-Port USB 3.0 Hub support charging?

No, the hub does not support charging. It is designed for data transfer and device connection only.

Can I use the hub with USB 2.0 and 1.1 devices?

Yes, the hub is backward compatible with USB 2.0 and 1.1 devices. However, the transfer speeds will be limited to the maximum speeds supported by those devices (480Mbps for USB 2.0 and 12Mbps for USB 1.1).

Do I need to install any drivers to use the hub?

No, the SABRENT 4-Port USB 3.0 Hub is plug-and-play and does not require any driver installation.

Can I use the hub with a Mac computer?

Yes, the hub is compatible with Mac OS 8.6 or above.

Q: How many ports does the Sabrent USB 3.0 Hub have?
A: The Sabrent USB 3.0 Hub has 4 ports.

Q: Does each port have its own power switch?
A: Yes, each port has its own separate power switch so you can control each port independently.

Q: What is the transfer speed supported by the Sabrent USB 3.0 Hub?
A: The Sabrent USB 3.0 Hub supports transfer speeds of up to 5Gbps (USB 3.0), 480Mbps (USB 2.0), & 12Mbps (USB 1.1).

Q: Is the Sabrent USB 3.0 Hub compatible with USB 2.0 and USB 1.1 devices?
A: Yes, the Sabrent USB 3.0 Hub is reverse compatible with USB 2.0 and USB 1.1 devices.

Q: Does the Sabrent USB 3.0 Hub require driver installation?
A: No, the Sabrent USB 3.0 Hub does not require driver installation; it is Plug & Play and Hot Swappable.

Q: Can the Sabrent USB 3.0 Hub charge an iPad?
A: No, the Sabrent USB 3.0 Hub will not charge an iPad (it will only sync).

Q: What are the system requirements for using the Sabrent USB 3.0 Hub?
A: The Sabrent USB 3.0 Hub is compatible with Windows 11, Windows 10, Windows 8.1/8, Windows 7, Windows Vista, Windows XP, Linux, and Mac OS 8.6 or above.

Q: Can I use this hub without a power adapter?
A: Yes, but only for small data transfers such as printers, mice, keyboards, and flash drives. For heavy drivers, you'll need a power supply (recommended: B00MRGKPH8 "PS-5V4A").

Q: Can I connect two portable 2TB HDDs to the Sabrent USB 3.0 Hub?
A: It depends on whether the HDDs have their own power source. If not, the hub may not be able to support them.

Q: Will the Sabrent USB 3.0 Hub work on a PS4?
A: If the hub has an external power supply and charging ports, then yes. However, if you plug more than one device to charge into a standard USB port, the PS4 will say "too many devices plugged into USB port".