Infinity Reference R253 Floorstanding Speaker User Manual

Introduction

Welcome to the world of high-quality audio with the Infinity Reference R253 Floorstanding Speaker. This 3-Way speaker design features dual 5.25" CMMD high-output woofers, a 5.25" flat-piston midrange driver, and a 1" CMMD tweeter with waveguide, providing you with an immersive audio experience. This user manual will guide you through the setup, usage, and troubleshooting tips for your new speaker.

Package Contents

• 1 x Infinity Reference R253 Floorstanding Speaker

Speaker Placement

Proper speaker placement is essential for optimal audio performance. Follow these guidelines for the best results:

1. Place the speaker on a stable, level surface.
2. Position the speaker at least 2-3 feet away from walls or other reflective surfaces to reduce sound reflections and improve audio quality.
3. For stereo setup, place the speakers at an equal distance from your listening position, forming an equilateral triangle.
4. Angle the speakers slightly inward towards the listening position for better sound imaging.

Connecting the Speaker

Before connecting the speaker, make sure your audio source (amplifier or receiver) is turned off to avoid potential damage. Follow these steps to connect the speaker:

1. Locate the speaker terminals on the rear panel of the R253 speaker.
2. Connect the speaker wire from your audio source to the speaker terminals, ensuring that the positive (+) terminal on the speaker is connected to the positive (+) terminal on your audio source, and the negative (-) terminal on the speaker is connected to the negative (-) terminal on your audio source.
3. Secure the speaker wire connections by tightening the terminal screws.
4. Turn on your audio source and adjust the volume to your desired level.

Troubleshooting Tips

If you encounter any issues with your Infinity Reference R253 speaker, try the following troubleshooting tips:

1. No sound: Check that the speaker is properly connected to your audio source and that the audio source is turned on. Ensure that the speaker wire connections are secure and that the correct terminals are connected.
2. Distorted sound: Make sure the speaker is placed on a stable, level surface and is not in contact with any objects that may cause vibrations. Check the speaker wire connections and ensure they are secure. If the distortion persists, lower the volume on your audio source.
3. Weak bass or treble: Adjust the bass and treble settings on your audio source to your preference. Ensure the speaker is placed at an appropriate distance from walls and other reflective surfaces to reduce sound reflections.

Frequently Asked Questions

Can I use the Infinity Reference R253 speaker without a subwoofer?

Yes, the R253 speaker has powerful low-end frequencies and clear mids, which allow it to perform well without a subwoofer. However, adding a subwoofer can enhance the overall audio experience, especially for movies.

What is the recommended amplifier power for the Infinity Reference R253 speaker?

There is no specific amplifier power requirement for the R253 speaker. However, it is important to choose an amplifier or receiver with a power output that matches the speaker's nominal impedance of 6 Ohms.

Can I use the Infinity Reference R253 speaker for surround sound systems?

Yes, the R253 speaker is suitable for use in surround sound systems. You can use multiple R253 speakers or combine them with other speakers from the Infinity Reference series to create a complete surround sound setup.

Q: What are the specifications of the Infinity Reference R253 Black 3-Way Floorstanding Speaker?
A: The Infinity Reference R253 Black 3-Way Floorstanding Speaker has a recommended amplifier power of 20-200 Watts, a nominal impedance of 6 Ohms, and a frequency response range of 41Hz–22kHz. It also features a dual 5.25" CMMD high-output woofers, a 5.25" flat-piston midrange driver, and a 1" CMMD tweeter with waveguide.

Q: What is the recommended wattage at the 6ohm setting for this speaker? Does it need biamping?
A: The recommended wattage for this speaker is between 20-200 Watts. An amplifier with 80 watts per channel would be sufficient unless it's a really large space. Biamping is not necessary.

Q: Is the price listed for one speaker or a pair?
A: The price listed is for one speaker.

Q: Where are these speakers made?
A: These speakers are made in China.

Q: What do customers think about these speakers?
A: Customers have generally positive reviews about these speakers. They praise the clear mids and powerful low-end, but some have criticized the weak tweeter. Many customers consider them to be a great value for their price range.

Q: Are these speakers suitable for surround sound systems?
A: Yes, these speakers are recommended for use in surround sound systems.

Q: What comes in the box when purchasing this product?
A: When purchasing this product, you will receive one floorstanding loudspeaker, four carpet spikes, and an owner's manual.

Q: What is the weight and dimensions of this product?
A: The Infinity Reference R253 Black 3-Way Floorstanding Speaker weighs 39.2 pounds and has dimensions of 13.2 x 7 x 40.2 inches.