KeylessOption Keyless Entry Remote Control Car Key Fob Replacement for LHJ011 (Pack of 2) User Manual

Package Contents

• 2 x KeylessOption Keyless Entry Remote Control Car Key Fobs
• 2 x Pre-installed Batteries
• 1 x KeylessOption Warranty Card

Programming Instructions

1. Close all vehicle doors.
2. Insert the key into the ignition.
3. Hold down the power UNLOCK button on the driver’s door panel. Continue to hold down until instructed to release in step 9.
4. Perform steps 5 through 8 in fairly rapid succession.
5. Turn the ignition switch to the ON position (as far as you can go without starting the engine).
6. Turn the ignition switch to the OFF position.
7. Turn the ignition switch to the ON position.
8. Turn the ignition switch to the OFF position.
9. Release the power unlock button on the door panel. The vehicle will lock and unlock the doors automatically.
10. Hold down the LOCK and UNLOCK buttons on the transmitter simultaneously until the door locks and unlocks. This step may take up to 30 seconds.
11. Repeat step 10 for each additional transmitter (including any existing transmitters).
12. Turn the ignition switch to the ON position in order to exit the transmitter programming mode.

Troubleshooting Tips

• If the remote is not working, ensure the battery is installed correctly and has sufficient power.
• Make sure you are within the operating range of the vehicle when using the remote.
• Ensure that there is no interference from other electronic devices that may be affecting the remote's signal.
• If the vehicle does not enter programming mode, repeat steps 1-9, ensuring that you perform them in quick succession.
• If the remote still does not work, contact KeylessOption tech support for further assistance.

Frequently Asked Questions

Q: Will this remote work for my vehicle?

A: This remote is designed to replace the LHJ011 and is compatible with various models of vehicles. Please check the product description to ensure it is compatible with your specific vehicle make and model.

Q: Can I program the remote myself, or do I need a professional?

A: You can program the remote yourself by following the provided programming instructions.

Q: How do I replace the battery in the remote?

A: To replace the battery, carefully pry open the remote casing using a small flat-head screwdriver. Remove the old battery and replace it with a new one, ensuring the correct orientation. Close the remote casing and test the remote to ensure proper function.

Q: What is the operating range of the remote?

A: The operating range of the remote may vary depending on the vehicle and environmental factors. Generally, the remote should function within a range of approximately 30-50 feet from the vehicle.

Q: What should I do if my remote stops working?

A: First, check the battery and replace it if necessary. If the remote still does not work, follow the programming instructions to reprogram the remote. If the issue persists, contact KeylessOption tech support for further assistance.

Q: What is included with the KeylessOption Keyless Entry Remote Control Car Key Fob Replacement for LHJ011 (Pack of 2)?
A: The KeylessOption Keyless Entry Remote Control Car Key Fob Replacement for LHJ011 (Pack of 2) comes fully tested with a battery installed and includes do-it-yourself programming instructions. A warranty card is also included with each purchase.

Q: What are the specifications of this product?
A: The brand and manufacturer of this product is KeylessOption, with model number KPT2097. The item weight is 1.51 ounces and the product dimensions are 2 x 0.75 x 4 inches. The manufacturer part number is KPT2097 and the OEM part numbers it replaces are 15132197, 15132198, 15186200, 15186201, 15186203, 15186209, 21997127, 22730827, LHJ011, and 10377295.

Q: Can these key fobs be programmed if I do not have my original fobs?
A: Yes, you should be able to program these without your original fobs. There are places on the web that show how to do this. For example, for a Chevrolet Tahoe you will need your ignition key.

Q: Are these key fobs OEM?
A: No, they are not OE (original equipment). However, they function just like OE and look similar to OE. If you want OE, you will pay at least five times more than the price of these key fobs.

Q: How many key fobs come in a pack?
A: Two key fobs come in a pack.

Q: What is the battery replacement for these key fobs?
A: The battery replacement for these key fobs is cr2032.

Q: Can both of these key fobs work for a 2004 Chevy Silverado 3500?
A: Yes, both key fobs should work for a 2004 Chevy Silverado 3500.

Q: How do I program these key fobs?
A: Here are the programming instructions for these key fobs:
1. Close all vehicle doors.
2. Insert the key into the ignition.
3. Hold down the power UNLOCK button on the driver’s door panel-continue to hold down until instructed to release in step 9.
4. Perform steps 5 through 8 in fairly rapid succession.
5. Turn the ignition switch to the ON position (as far as you can go without starting the engine).
6. Turn the ignition switch to the OFF position.
7. Turn the ignition switch to the ON position.
8. Turn the ignition switch to the OFF position.
9. Release the power unlock button on the door panel. The vehicle will lock and unlock the doors automatically.
10. Hold down the LOCK and UNLOCK buttons on the transmitter simultaneously until the door locks and unlocks. This step may take up to 30 seconds.
11. Repeat step 10 NOW for each additional transmitter (including any existing transmitters).
12. Turn the ignition switch to the ON position in order to exit the transmitter programming mode.

Q: What is included in customer reviews of this product?
A: Customers have reviewed this product positively, mentioning that it is a perfect replacement, easy to program, solidly built, and ridiculously priced. Some customers have also provided their own programming instructions based on their experience with this product and their specific vehicle model.