Aetertek AT-919C 2-Dog 1100 Yard Ultra Range Remote Training Shock Collar User Manual

Package Contents

• 1 x Remote Transmitter
• 2 x Collar Receivers
• 1 x Adjustable TPU Strap
• 1 x USB Charging Cable
• 1 x Charger
• 1 x Test Bulb
• 2 x Sets of Metal Probes
• 1 x User Manual

Initial Setup

1. Charge the remote transmitter and collar receivers using the provided USB charging cable and charger. The LED indicator on the collar receiver will turn green when fully charged.
2. Adjust the TPU strap to fit your dog's neck comfortably, ensuring the metal probes make contact with the dog's skin. The collar strap is adjustable from approximately 18cm to 60cm (7.1” to 24”).
3. Turn on the remote transmitter by pressing and holding the power button for 3 seconds. The LCD screen will display the current settings.
4. Select the desired dog (1 or 2) using the dog selector button on the remote transmitter.
5. Pair the collar receiver to the remote transmitter by pressing and holding the power button on the collar receiver for 3 seconds. The LED indicator will flash rapidly, indicating it is in pairing mode.
6. Press the Y button on the remote transmitter to send a signal to the collar receiver. The LED indicator on the collar receiver will turn solid, indicating a successful pairing.

Using the Remote Transmitter

1. Select the desired dog (1 or 2) using the dog selector button on the remote transmitter.
2. Adjust the shock level (1-10) using the up and down arrow buttons on the side of the remote transmitter. The selected level will be displayed on the LCD screen.
3. Press the Y button to send a shock to the collar receiver. The LED indicator on the collar receiver will flash, indicating a received signal.
4. Press the V button to send a vibration to the collar receiver. The LED indicator on the collar receiver will flash, indicating a received signal.
5. Press the B button to send a beep tone to the collar receiver. The LED indicator on the collar receiver will flash, indicating a received signal.
6. Activate the auto anti-bark feature by pressing the dog selector button until the bark control icon is displayed on the LCD screen. The collar receiver will now automatically correct your dog's barking when left alone.
7. Lock the remote transmitter by pressing the up and down arrow buttons simultaneously for 3 seconds. The LCD screen will display a lock icon, indicating the remote is locked and will not send accidental corrections.

Troubleshooting Tips

• If the collar receiver is not responding to the remote transmitter, ensure both devices are charged and powered on. Repeat the pairing process if necessary.
• If the collar receiver is causing discomfort or irritation to your dog's skin, ensure the metal probes are making proper contact and adjust the collar strap as needed. Consider using the provided longer or shorter metal probes for a better fit.
• If the remote transmitter is not holding a charge, ensure the charging cable and charger are functioning properly. Contact the manufacturer for further assistance if the issue persists.

Frequently Asked Questions

Q: How do I prevent the collar from leaving marks or causing burns on my dog's neck?

A: Ensure the collar is properly fitted, with the metal probes making good contact with the dog's skin. Avoid leaving the collar on your dog for extended periods of time, and regularly check for signs of irritation or discomfort. If necessary, use the provided longer or shorter metal probes for a better fit.

Q: Can I use this collar for bark control without manually correcting my dog?

A: Yes, the auto anti-bark feature allows the collar to automatically correct your dog's barking when left alone. To activate this feature, press the dog selector button on the remote transmitter until the bark control icon is displayed on the LCD screen.

Q: How long does the battery last on the collar receiver and remote transmitter?

A: The collar receiver's battery typically lasts 1.5 - 2 days, while the remote transmitter's battery can last up to 1 month depending on usage. To conserve battery life, turn off the devices when not in use and recharge as needed.

Q: Do I need to re-pair the collar receiver and remote transmitter after charging?

A: Yes, you will need to re-pair the devices after charging. Follow the pairing instructions in the Initial Setup section of this user manual.

Q: Can I use this collar on multiple dogs?

A: Yes, the remote transmitter can control up to two collar receivers. Simply select the desired dog (1 or 2) using the dog selector button on the remote transmitter and pair each collar receiver accordingly.

Q: What is the range of the Aetertek AT-919C remote training dog collar?
A: The Aetertek AT-919C remote training dog collar has a range of up to 1100 yards (approx. 1000 meters).

Q: How many levels of shock does the collar have?
A: The collar has adjustable 10 levels of shock to fit the needs of dog training.

Q: Does the collar have an anti-bark feature?
A: Yes, the collar has an auto anti-bark feature that can control your dog's barking automatically when left alone.

Q: Is the receiver rechargeable and waterproof?
A: Yes, the receiver is rechargeable and waterproof.

Q: What is the adjustable length of the collar strap?
A: The collar strap is adjustable from approximately 18cm to 60cm (from approximately 7.1” to 24”).

Q: How many levels of beep tone does the collar have?
A: The collar has 9 levels of beep tone.

Q: Can the anti-bark function be turned off?
A: Yes, it is manual/auto anti-bark switchable. There is a button to switch receivers auto/manual anti-bark.

Q: How does switching between collars work?
A: It is simple and easy. There are three channels (dog #1, dog #2, and dog #0). You can synchronize receiver 1 with dog# channel 1 and receiver 2 with dog# channel 2. After successfully synchronizing receivers with dog# channels of remote, you can easily push one button to switch dog# channel then control the synchronized receiver. By synchronizing as above, the dog# 0 channel will automatically control two receivers simultaneously.

Q: How strong is the shock? Can it still work if I leave my dog at home?
A: The device is auto/manual anti-bark node switchable. If you use manual mode, there are 10 strength levels to select from. If you use auto mode, the auto response will get stronger from beeper/vibrate then shock depending on the barking or noise level. We highly recommend using auto mode only when the breeder is at home because circumstance noise will be possible to induce a response, which can confuse or possibly hurt your pet.

Q: Can dogs with very large necks wear this collar?
A: The maximum length of the special plastic strips to wear the receiver on a dog's neck is 24". Please measure your dog's neck perimeter. Once your dog's neck perimeter is over 24", you may need to connect two strips to wear the receiver on your dog's neck. If you need two strips for each dog's neck perimeter, please inform us after placing an order.

Q: How does the anti-bark function work with the dog?
A: The auto/manual mode is switchable for executing this anti-bark function. In auto mode, there is a voice sensor built in the receiver to detect barking or noise and then automatically executes beeper/vibrate/shock to stop dog barking or violent noise.

Additionally, some customers have provided their own feedback and experiences with the product in the form of reviews. Some customers have reported issues with battery life and syncing, while others have found success in using the collar for manual correction and reducing barking behavior in their dogs. It is important to carefully consider all aspects of a product and read reviews before making a purchase decision.