Klipsch R-28F Floorstanding Speaker User Manual

Table of Contents

1. Introduction
2. Unpacking and Setup
3. Connecting to a Receiver
4. Speaker Placement
5. Troubleshooting Tips
6. Frequently Asked Questions

1. Introduction

Thank you for purchasing the Klipsch R-28F Floorstanding Speaker. This high-performance speaker is designed to provide superior sound quality for your movies and music. In this user manual, you will find detailed instructions for setting up and using your new speaker.

2. Unpacking and Setup

1. Remove the speaker from the packaging.
2. Place the speaker in the desired location, ensuring it is on a stable surface and has enough space around it for proper ventilation.
3. If desired, attach the included speaker grill by aligning it with the mounting holes on the front of the speaker and gently pressing it into place.

3. Connecting to a Receiver

1. Locate the dual 5-way binding posts on the back of the speaker.
2. Connect the speaker wire from your receiver or amplifier to the binding posts, ensuring that the positive (+) and negative (-) terminals on the speaker match those on the receiver or amplifier.
3. If bi-wiring or bi-amping, connect the appropriate wires to the respective terminals on the speaker and receiver or amplifier.

4. Speaker Placement

For the best sound quality, follow these guidelines for speaker placement:

• Position the speakers at least 2 feet away from any walls or other large objects.
• Place the speakers at an equal distance from your primary listening position.
• Angle the speakers slightly inward, so they are aimed towards the listening position.

5. Troubleshooting Tips

• If you experience a lack of sound or poor sound quality, check the connections between the speaker and the receiver or amplifier, ensuring that the wires are securely connected and the terminals are correctly matched.
• If the speaker grill is not fitting properly or coming loose, gently adjust its position on the mounting holes and press it into place.
• If the bass response is not as expected, experiment with adjusting the speaker placement and settings on your receiver or amplifier.

6. Frequently Asked Questions

Q: What is the recommended power for these speakers?

A: The Klipsch R-28F speakers are highly efficient and do not require a high-powered amplifier or receiver. A receiver with 80 watts per channel should be sufficient for most applications.

Q: Do I need a subwoofer with these speakers?

A: While the R-28F speakers have a strong low-frequency response, they may not completely replace the need for a dedicated subwoofer, especially for movies and music with deep bass content.

Q: Can I use these speakers with my existing surround sound system?

A: Yes, the R-28F speakers can be integrated into an existing surround sound system as front left and right speakers. Be sure to adjust the settings on your receiver or amplifier to accommodate the new speakers.

Q: How do I break in these speakers?

A: To break in the speakers, play a variety of music at moderate volume levels for about 20 hours. This will help the speaker components settle in and provide optimal sound quality.

Q: How many watts do the Klipsch R-28F Floorstanding Speakers put out?
A: The speakers can handle 150 watts/channel, for a total of 600 watts. They have a great response and sound great at all levels.

Q: Is my Sony 5.2 receiver with 145 watts per channel at 6 ohms good enough for these speakers?
A: While the speakers will work with your receiver, it's recommended to upgrade to get more power out of them. A receiver with at least 50 watts per channel is suggested for a medium-sized room.

Q: What would be a good receiver to drive two pairs of Klipsch R-28F speakers?
A: Yamaha receivers are often recommended with Klipsch speakers. As a general rule, try to match the price of the speakers to the cost of the receiver. The Yamaha RX-A710 is a good option and has around 90 watts per channel, but a receiver with as little as 50 watts per channel can still provide great performance in a medium-sized room.

Q: Are these speakers sold individually or in pairs?
A: The Klipsch R-28F Floorstanding Speakers are sold individually, not in pairs.

Q: Would these be good speakers for playing records with a stereo receiver?
A: Yes, the Klipsch R-28F Floorstanding Speakers would be a good choice for playing records with a stereo receiver. Yamaha receivers are often recommended, and it's important to consider what other devices you'll be connecting to the receiver.

Q: Are these speakers 2-way or 3-way?
A: The Klipsch R-28F Floorstanding Speakers are 2-way speakers with two mid-range woofers and one horn tweeter. It may have a 3-way crossover.

Q: Can my Proton A 1150 amp power these speakers?
A: While more power is recommended, the Proton A 1150 amp should work for low to moderate volumes.

Q: Would the Klipsch R-25c or RP 250c be a better center speaker to pair with the R-28F speakers?
A: Either speaker will work, but the RP 250c may provide a cleaner sound.

Q: What are the dimensions and weight of the Klipsch R-28F Floorstanding Speakers?
A: The speakers measure 15.7 x 9.5 x 42 inches and weigh 56.7 pounds.

Q: What is included in the box when purchasing these speakers?
A: Each Klipsch R-28F Floorstanding Speaker comes with a removable grille and owner's manual.