Jensen JMC1250 Bluetooth 3-Speed Stereo Turntable and 3 CD Changer with Dual Cassette Deck User Manual

Table of Contents

1. Introduction
2. Package Contents
3. Setting Up Your Turntable
4. Using the Turntable
5. Using the CD Changer
6. Using the Dual Cassette Deck
7. Using the Bluetooth Function
8. Using the AM/FM Radio
9. Troubleshooting Tips
10. Frequently Asked Questions

1. Introduction

Welcome to the Jensen JMC1250 Bluetooth 3-Speed Stereo Turntable and 3 CD Changer with Dual Cassette Deck. This versatile audio system allows you to play vinyl records, CDs, cassette tapes, and listen to AM/FM radio. Additionally, you can connect your Bluetooth-enabled devices to stream music wirelessly. Please read this user manual carefully to ensure the proper use and care of your new audio system.

2. Package Contents

• 1 x Jensen JMC1250 Turntable
• 1 x Power Cord
• 1 x Remote Control (2 AAA batteries required, not included)
• 1 x Dust Cover
• 1 x User Manual

3. Setting Up Your Turntable

1. Place your turntable on a flat, stable surface.
2. Connect the power cord to the back of the unit and plug it into a power outlet.
3. Install 2 AAA batteries (not included) into the remote control.
4. Remove the dust cover from the turntable platter.
5. Unlock the tonearm by sliding the lock towards the platter.
6. Remove the protective cover from the stylus.
7. Replace the dust cover on the turntable platter.

4. Using the Turntable

1. Turn on the unit by pressing the power button.
2. Select the "Phono" function by pressing the "Function" button on the remote control or the front panel.
3. Place a vinyl record on the platter and select the appropriate speed (33, 45, or 78 RPM) using the speed selector switch.
4. Lift the tonearm using the cueing lever and gently place it on the desired track of the vinyl record.
5. Adjust the volume using the volume control on the front panel or the remote control.
6. To stop playback, lift the tonearm using the cueing lever and return it to the tonearm rest. The turntable will automatically stop.

5. Using the CD Changer

1. Turn on the unit by pressing the power button.
2. Select the "CD" function by pressing the "Function" button on the remote control or the front panel.
3. Press the "Open/Close" button to open the CD tray.
4. Place up to 3 CDs on the tray, with the label side facing up.
5. Press the "Open/Close" button again to close the CD tray.
6. Use the remote control or the front panel buttons to play, pause, skip tracks, and control other CD playback functions.

6. Using the Dual Cassette Deck

1. Turn on the unit by pressing the power button.
2. Select the "Tape" function by pressing the "Function" button on the remote control or the front panel.
3. Press the "Eject" button to open the cassette deck door.
4. Insert a cassette tape into the deck with the exposed tape facing down and the side you want to play facing out.
5. Close the cassette deck door.
6. Press the "Play" button to start playback.
7. Use the remote control or the front panel buttons to control playback functions such as fast forward, rewind, pause, and stop.

7. Using the Bluetooth Function

1. Turn on the unit by pressing the power button.
2. Select the "Bluetooth" function by pressing the "Function" button on the remote control or the front panel.
3. Enable Bluetooth on your device and search for available devices.
4. Select "JMC-1250" from the list of devices on your Bluetooth-enabled device.
5. Once connected, you can stream music from your device through the JMC-1250's speakers.

8. Using the AM/FM Radio

1. Turn on the unit by pressing the power button.
2. Select the "Tuner" function by pressing the "Function" button on the remote control or the front panel.
3. Choose between AM and FM bands using the "Band" button.
4. Use the "Tuning Up/Down" buttons to manually tune to your desired radio station.
5. To save a preset, press and hold the "Memory" button, then press the "Preset Up/Down" buttons to select a preset number. Press "Memory" again to save the preset.
6. Use the "Preset Up/Down" buttons to recall saved presets.

9. Troubleshooting Tips

If you encounter any issues while using your Jensen JMC-1250, try the following troubleshooting tips:

• Ensure the power cord is securely connected to the unit and plugged into a working power outlet.
• Check the volume level and ensure the unit is not set to "Mute."
• Make sure the correct function is selected (Phono, CD, Tape, Bluetooth, or Tuner).
• For Bluetooth connectivity issues, ensure your device's Bluetooth is enabled and within range (approximately 33 feet).
• For radio reception issues, adjust the position of the AM loop antenna or FM wire antenna.
• If the turntable is not spinning, ensure the platter is properly seated and the tonearm is not in the rest position.

10. Frequently Asked Questions

Q: Can I connect external speakers to the JMC-1250?

A: No, the JMC-1250 does not have outputs for connecting external speakers. It has built-in speakers for audio playback.

Q: Can I record from vinyl or cassette to CD?

A: No, the JMC-1250 does not have a recording function.

Q: Is the JMC-1250 compatible with 220V power outlets?

A: No, the JMC-1250 is designed for use with 120V power outlets. Using it with a 220V outlet may damage the unit.

Q: Can I use headphones with the JMC-1250?

A: Yes, the JMC-1250 has a 3.5mm headphone jack on the front panel for private listening.

Product FAQ for Jensen JMC1250 Bluetooth 3-Speed Stereo Turntable and 3 CD Changer with Dual Cassette Deck (JMC-1250)

Q: What are the dimensions of the system?
A: The main unit is 14" deep, 18" tall and 12 " across. Each of the two speakers are 14" tall, 8" deep and 8" across.

Q: Can I attach different speakers to this?
A: The wires are permanent but you can splice them with electrical tape. I had to do this because the wires were too short.

Q: Can I connect my own speakers to this system?
A: Yes, the Jensen can accept extra speakers. One of the benefits of the system is this ability.

Q: Do the speakers plug into unit with jack type attachment or do you slip speaker wire into locking mechanism?
A: They just lock in the old way.

Q: How do LPs sound? Can you use different speakers?
A: LPs sound great. My husband also used his old speakers with the new ones and also hooked it up to work with our TV system.

Q: Anyone have issues opening the CD tray and cassette racks? They don’t open on mine when the buttons are pushed. Radio works and power is on.
A: Mine didn't work out of the box. Got a 'door error'. Promptly returned.

Q: I don't understand 'bluetooth'. Do all CDs, tapes, et al have to be bluetooth compatible?
A: The source of the sound such as a CD or a tape has nothing to do with Bluetooth and therefore need not be compatible. Bluetooth is an invisible wire connecting devices that must both be Bluetooth compatible. The headphones or speakers must be Bluetooth compatible, and so does the tape player or CD player if you want to connect them wirelessly via Bluetooth.

Q: When I put in CD mode and push the button to open the door, it reads "door error."
A: "Door Error" means something is wrong with the CD tray mechanism. You may want to return it and order another one.

Q: Can you pair Bluetooth headphones to these?
A: Yes, you can pair Bluetooth headphones to this stereo.

Q: What is the weight of the product?
A: The item weighs 27.5 pounds.

Q: Is there a user manual available for this product?
A: Yes, kindly refer to the user manual especially manual page E-14 for better use.