Pyle 8-Inch Ceiling Speakers - PDIC86
The Pyle Ceiling Speakers - Stereo Home Theater Speakers - in Wall Speakers Flush Mount - 8-Inch White 250 Watt, 2-Way, (Pair) (PDIC86) are a great addition to any home or office…
Manual and instructions
Instruction-focused content generated from the current product data and source context.
Pyle Ceiling Speakers PDIC86 User Manual
Introduction
The Pyle PDIC86 8-inch two-way dual speakers deliver stereo sound to any room in your home or office without cluttering floor space. These speakers are perfect for custom installations and applications, offering a clean look on walls or ceilings. This manual will guide you through the installation process and provide troubleshooting tips and frequently asked questions.Package Contents
- 2 x 8-inch Wall Speakers
- 2 x Round Speaker Grills
- 2 x Square Speaker Grills
- Cutout Template
Installation
Step 1: Choose the Installation Location
Determine the best location for your speakers, considering factors such as room layout and desired sound coverage. Use the included cutout template to mark the installation location on your wall or ceiling.Step 2: Cut the Hole
Using a drywall saw or similar tool, carefully cut out the hole following the marked template. Be cautious of any wires or pipes behind the wall or ceiling before cutting.Step 3: Prepare the Speaker
Remove the grill from the speaker by gently prying it off. If you prefer a square grill, replace the round grill with the square one included in the package.Step 4: Connect the Speaker Wires
Run speaker wires from your audio source to the installation location. Strip the ends of the wires and connect them to the speaker terminals, ensuring proper polarity (+ to + and - to -).Step 5: Install the Speaker
Insert the speaker into the cutout hole and use a screwdriver to tighten the spring-loaded clips, securing the speaker in place. Be careful not to overtighten the clips, as this may cause damage to the speaker or the wall/ceiling.Step 6: Attach the Grill
Snap the grill onto the speaker, ensuring it is securely in place. If necessary, use the included putty to prevent the grill from rattling at higher volume levels.Troubleshooting Tips
- If you experience poor sound quality, check the speaker wire connections and ensure proper polarity.
- If the grill rattles at high volume levels, use the included putty to secure it in place.
- If the grill does not fit properly, try loosening the speaker clamp screws slightly.
Frequently Asked Questions
Q: Can these speakers be used outdoors?
A: While the Pyle PDIC86 speakers are not specifically designed for outdoor use, they can be installed in a covered outdoor area, such as a porch. However, it is recommended to paint the speaker grills to protect them from UV sunlight and potential damage.Q: What is the maximum thickness of the wall or ceiling that these speakers can be installed in?
A: The maximum thickness that the spring-loaded clips can accommodate is approximately 1.5 inches.Q: Are these speakers compatible with a Bluetooth wall plate?
A: Yes, the Pyle PDIC86 speakers can be connected to a Bluetooth wall plate for wireless audio streaming.Q: Can I paint the grills to match my wall or ceiling color?
A: Yes, the grills can be painted to match your desired color. It is recommended to use a paint specifically designed for plastic surfaces.Q: Are these speakers suitable for surround sound systems?
A: While the Pyle PDIC86 speakers are not specifically designed for surround sound systems, they can be used as part of a home theater setup for a budget-conscious installation. However, for a more immersive and high-quality surround sound experience, it is recommended to use speakers specifically designed for home theater applications.Frequently asked questions
Q: What type of speakers are the Pyle PDIC86?
A: The Pyle PDIC86 are 2-way dual speakers that deliver stereo sound to any room in your home or office without cluttering floor space.
Q: How can the Pyle PDIC86 be installed?
A: The Pyle PDIC86 can be installed in-wall or in-ceiling flush mount with convenient spring-loaded clips for easy installation.
Q: What is the frequency response of the Pyle PDIC86?
A: The Pyle PDIC86 has a frequency response of 40Hz - 20kHz, with a 1/2” polymer tweeter and exceptional 8 ohm impedance rating.
Q: What is the peak power output of the Pyle PDIC86?
A: The Pyle PDIC86 has an impressive 250 watts peak power handling capability.
Q: Does the Pyle PDIC86 come with interchangeable grill covers?
A: Yes, the Pyle PDIC86 comes with changeable round and square stain resistant grills.
Q: Can the tweeters on the Pyle PDIC86 be aimed or swiveled?
A: No, the tweeters on the Pyle PDIC86 are fixed in place.
Q: Are these speakers Bluetooth enabled?
A: No, the Pyle PDIC86 is not Bluetooth enabled. However, there is a 10" inches ceiling speaker with Bluetooth available from Pyle (PDICBT2106).
Q: What is included in the package of the Pyle PDIC86?
A: The package includes (2) 8'' -inch Wall Speakers, (2) Round Speaker Grills, and (2) Square Speaker Grills.
Q: Can the Pyle PDIC86 be used outdoors?
A: Yes, the Pyle PDIC86 can be used outdoors as long as it is properly covered.
Q: What is the size and weight of the Pyle PDIC86?
A: The Pyle PDIC86 measures 12.2 x 10 x 11.5 inches and weighs 8.8 pounds.
Overall, the Pyle PDIC86 is a great value for those looking for a budget-friendly option for whole home audio installations. While the plastic grills are cheap and can vibrate when playing hard, the sound quality is surprisingly good for the price. The speakers are easy to install with included cutout template and interchangeable grill covers. However, it should be noted that the tweeters are fixed in place and there is no real crossover network, which may affect the balance of music in middle and lower range.
Specifications
Structured product details pulled from the latest available product data.
| Brand | Pyle |
|---|---|
| Manufacturer | Pyle |
| Model Number | PDIC86 |
| Category | Electronics > Home Audio > Speakers > Ceiling & In-Wall Speakers |
| Color | 8'' |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Weight | 8.91 pounds |
| Dimensions | 10"D x 12.2"W x 11.5"H |
| First Available | August 6, 2014 |
| Mounting Type | Ceiling Mount,Wall Mount |
| Model Name | PDIC35 |
| Speaker Type | Tweeter |
| Special Feature | Bass Boost, Stereo Pairing |
| Recommended Uses For Product | Home Theater,Construction |
| Compatible Devices | Home Theater |
| Subwoofer Diameter | 8 Inches |
| Surround Sound Channel Configuration | 2.0 |
| Included Components | (2) 8'' -inch Wall Speakers, (2) Round Speaker Grills, (2) Square Speaker Grills |
| Product Dimensions | 10"D x 12.2"W x 11.5"H |
| Item Weight | 4.05 Kilograms |
| Impedance | 4 Ohms |
| Is Waterproof | FALSE |
| Warranty Type | Limited Warranty |
| Maximum Range | 9 Meters |
| Number of Items | 2 |
| Control Method | App |
| Speaker Size | 8 Inches |
| Signal-to-Noise Ratio | 8 dB |
| Woofer Diameter | 8 Inches |
| Water Resistance Level | Not Water Resistant |
| Audio Driver Type | Dynamic Driver |
| Audio Driver Size | 8 Inches |
| Subwoofer Connectivity Technology | Wired |
| Series Number | 4 |
| Specific Uses For Product | Home Theater, Construction |
| UPC | 068888755863 |
| Style | Standard w/ Round and Square Cover |
| Global Trade Identification Number | 00068888755863 |
| Item Weight | 8.91 pounds |
| ASIN | B00MH0M1A8 |
| Item model number | PDIC86 |
| Customer Reviews | 4.3 4.3 out of 5 stars (545) 4.3 out of 5 stars |
| Best Sellers Rank | #46,292 in Electronics (See Top 100 in Electronics) #66 in Ceiling & In-Wall Speakers #330 in Home Theater Speakers |
| Is Discontinued By Manufacturer | No |
| Date First Available | August 6, 2014 |
| Speaker Maximum Output Power | 250 Watts |
| Frequency Response | 20 KHz |
| Connectivity Technology | Wired |
| Audio Output Mode | Stereo |
Use this page carefully
ProductReviewGPT pages are AI-assisted summaries. When a source document is available, it should take priority over the generated summary for important operating, warranty, safety, or compliance details.