Pioneer Elite SP-EBS73 Andrew Jones Home Audio Bookshelf Speakers User Manual

Table of Contents

1. Introduction
2. Package Contents
3. Speaker Placement
4. Connecting the Speakers
5. Speaker Configuration
6. Troubleshooting Tips
7. Frequently Asked Questions

1. Introduction

Welcome to the Pioneer Elite SP-EBS73 Andrew Jones Home Audio Bookshelf Speakers. These highly-acclaimed speakers deliver professional-quality sound for an immersive listening experience. This user manual will guide you through the setup and proper usage of your new speakers.

2. Package Contents

• 2 x Pioneer Elite SP-EBS73 Bookshelf Speakers
• User Manual

3. Speaker Placement

For the best listening experience, follow these guidelines for speaker placement:

• Position the speakers at ear level when seated.
• Place the speakers at least 6-10 feet apart for optimal stereo imaging.
• Angle the speakers towards the main listening area.
• Keep a minimum distance of 1-2 feet from walls and other reflective surfaces to minimize sound reflections.

4. Connecting the Speakers

Follow these steps to connect your speakers to an amplifier or receiver:

1. Turn off the amplifier or receiver before connecting the speakers.
2. Strip approximately 1/2 inch of insulation from the ends of the speaker wire.
3. Insert the stripped end of the speaker wire into the corresponding red (+) and black (-) binding posts on the back of the speaker.
4. Tighten the binding posts to secure the speaker wire in place.
5. Connect the other end of the speaker wire to the appropriate speaker outputs on the amplifier or receiver, ensuring to match the red (+) and black (-) terminals.
6. Turn on the amplifier or receiver and test the speakers for proper operation.

5. Speaker Configuration

These speakers can be used as front-channel, rear-channel, or Dolby Atmos enabled speakers in a home theater setup. Refer to your amplifier or receiver's user manual for instructions on configuring your speaker system.

6. Troubleshooting Tips

• If there is no sound from the speakers, check that the amplifier or receiver is turned on and the correct input is selected.
• Ensure that the speaker wire connections are secure and properly connected to the correct terminals on both the speakers and the amplifier or receiver.
• Check the speaker wire for any damage or breaks, and replace if necessary.
• If the sound is distorted or weak, adjust the volume and tone controls on the amplifier or receiver.
• Make sure the speakers are not placed too close to walls or other reflective surfaces, as this may cause sound reflections and affect audio quality.

7. Frequently Asked Questions

Can these speakers be wall-mounted?

Yes, these speakers can be wall-mounted using the appropriate brackets or mounts (not included).

Do these speakers require a separate amplifier or receiver?

Yes, these speakers need to be connected to an amplifier or receiver to function properly.

Can I use these speakers in a 5.1 or 7.1 surround sound setup?

Yes, these speakers can be used as front-channel, rear-channel, or Dolby Atmos enabled speakers in a surround sound setup.

What is the recommended power output for an amplifier or receiver to use with these speakers?

The recommended power output for an amplifier or receiver is 280 Watts.

Q: What are the Pioneer Elite SP-EBS73 Andrew Jones Home Audio Bookshelf Speakers?
A: The Pioneer Elite SP-EBS73 Andrew Jones Home Audio Bookshelf Speakers are a set of two bookshelf loudspeakers that are Dolby Atmos enabled. They are designed with gold-plated connectors, multi-element complex crossovers, and cabinets with gently curved sides to eliminate standing waves encountered in typical square-box designs.

Q: Who designed these speakers?
A: These speakers were designed by speaker designer Andrew Jones.

Q: What is the Coherent Source Transducer?
A: The Coherent Source Transducer (CST) is a driver that dramatically reduces interference between the midrange and tweeter, precisely controlling sound directivity at all frequencies and ensuring that direct and reflected sound arrive at the listening position with identical timing and timbre.

Q: What is the three-way speaker design?
A: A true 3-way speaker design means each major frequency band is represented with a separate driver. The high-frequency, midrange, and low-frequency drivers help deliver balanced sound for a better listening experience.

Q: What is Dolby Atmos?
A: Dolby Atmos is an audio technology that creates a more immersive listening experience by putting sounds into motion and reproducing the full impact of the artist's work.

Q: Are these speakers bi-ampable or bi-wireable?
A: No, these speakers are not bi-ampable or bi-wireable. The speaker has two separate speaker posts but the top post is for the top firing atmos speaker only. It is in a separate enclosure and treated as a separate speaker. It also has a high pass filter (Dolby atmos guidelines) that has a crossover set at 150 or 180hz. So high frequencies only.

Q: Can you use these speakers without enabling the atmos part?
A: Yes, you can use these speakers without enabling the atmos part. Simply don't connect the separate ATMOS upward firing speaker.

Q: What center channel speaker would you recommend to match these speakers?
A: The AJ SP-EC73 center channel speaker is recommended to match these speakers.

Q: Can these be suspended from a wall?
A: There aren't any brackets on them for wall mounting and between the 2 sets of terminal posts and the port there's little room to install an aftermarket bracket, especially one strong enough to hold a speaker this heavy.