Pioneer Elite SW-E10 Andrew Jones Home Audio Subwoofer User Manual

Table of Contents

1. Introduction
2. Package Contents
3. Setup and Installation
4. Controls and Adjustments
5. Troubleshooting Tips
6. Frequently Asked Questions

1. Introduction

Welcome to the world of Pioneer Elite SW-E10 Andrew Jones Home Audio Subwoofer, designed to bring professional-quality sound to your living room. This highly-acclaimed subwoofer delivers on sound, creating an immersive listening experience. Please read this user manual carefully to ensure proper setup and usage.

2. Package Contents

• Pioneer Elite SW-E10 Subwoofer
• Power Cable
• User Manual

3. Setup and Installation

1. Choose a suitable location for the subwoofer. It should be placed on a flat surface, preferably near a wall or corner for better bass response. Ensure there is enough space for the down-firing driver and proper ventilation.
2. Connect the subwoofer to your AV receiver or amplifier using a suitable subwoofer cable (not included). Plug the cable into the subwoofer's input and the receiver's subwoofer output.
3. Plug the power cable into a wall outlet and switch on the subwoofer.
4. Adjust the volume, phase, and crossover settings as needed (refer to Section 4 for more details).

4. Controls and Adjustments

The Pioneer Elite SW-E10 Subwoofer features controls for volume, phase, and crossover adjustments. These allow for fine-tuning the subwoofer's performance when integrating it into your main system.

• Volume: Adjust the subwoofer's output level to match the volume of your main speakers. This control is located on the rear panel of the subwoofer.
• Phase: Adjust the phase control to ensure the subwoofer's output is in sync with your main speakers. This can help improve bass response and overall sound quality. The phase control is located on the rear panel of the subwoofer.
• Crossover: Set the crossover frequency to determine which low frequencies are sent to the subwoofer and which are sent to your main speakers. This control is located on the rear panel of the subwoofer.

5. Troubleshooting Tips

1. If the subwoofer is not producing any sound, ensure that the power cable is properly connected and the subwoofer is switched on.
2. Check the connections between the subwoofer and the AV receiver or amplifier. Ensure that the cable is securely plugged into the appropriate inputs and outputs.
3. If the subwoofer's output is weak or distorted, try adjusting the volume, phase, and crossover settings. Experiment with different settings to find the optimal configuration for your system.
4. If the problem persists, consult the manufacturer's customer support or your local dealer for further assistance.

6. Frequently Asked Questions

1. Q: Can I use this subwoofer with any AV receiver or amplifier?
   A: Yes, the Pioneer Elite SW-E10 Subwoofer is compatible with most AV receivers and amplifiers. Ensure that your receiver or amplifier has a dedicated subwoofer output.
2. Q: What type of cable should I use to connect the subwoofer to my receiver or amplifier?
   A: A standard subwoofer cable (not included) is recommended for connecting the Pioneer Elite SW-E10 Subwoofer to your receiver or amplifier.
3. Q: How do I adjust the phase and crossover settings on the subwoofer?
   A: The phase and crossover controls are located on the rear panel of the subwoofer. Adjust these settings to fine-tune the subwoofer's performance and integration with your main system.
4. Q: Can I use this subwoofer for both music and movies?
   A: Yes, the Pioneer Elite SW-E10 Subwoofer is designed to provide deep, satisfying bass for both music and movie soundtracks, making it a versatile addition to your home audio system.

Q: What is the Pioneer Elite SW-E10 Andrew Jones Home Audio Subwoofer?
A: The Pioneer Elite SW-E10 Andrew Jones Home Audio Subwoofer is a 10-inch long-throw woofer built for delivering impactful and accurate bass frequencies that are essential for conveying the weight and realism contained in dynamic music and film soundtracks. It comes with a 2-inch voice coil designed for greater power handling, with a motor and suspension that allows one inch of peak-to-peak linear movement of the cone for maximum output capability.

Q: What is the RMS power of the Pioneer Elite SW-E10 Andrew Jones Home Audio Subwoofer?
A: The Pioneer Elite SW-E10 Andrew Jones Home Audio Subwoofer has an integrated BASH amplifier that provides up to 600 watts peak power (300 Watts RMS).

Q: What is the connectivity technology of the Pioneer Elite SW-E10 Andrew Jones Home Audio Subwoofer?
A: The Pioneer Elite SW-E10 Andrew Jones Home Audio Subwoofer has a wired connectivity technology.

Q: What are the dimensions and weight of the Pioneer Elite SW-E10 Andrew Jones Home Audio Subwoofer?
A: The Pioneer Elite SW-E10 Andrew Jones Home Audio Subwoofer measures 13 x 13 x 13 inches and weighs 34 pounds.

Q: Can one use the Pioneer Elite SW-E10 Andrew Jones Home Audio Subwoofer without enabling the Atmos part?
A: Yes, one can use the Pioneer Elite SW-E10 Andrew Jones Home Audio Subwoofer without enabling the Atmos part. Simply don't connect the separate ATMOS upward firing speaker or connect it to the upward firing speaker to see if you like it. The speakers sound fine playing "normal" stereo or surround sound, particularly with a subwoofer to handle the very low frequencies.

Q: What center channel speaker would you recommend to match these speakers?
A: We would recommend using the AJ SP-EC73 center channel speaker to match the Pioneer Elite SW-E10 Andrew Jones Home Audio Subwoofer. The SP-EC73 center channel speaker employs the very same CST and bass driver as the compact speakers to maintain a consistent sound signature.

Q: Can these be suspended from a wall?
A: No, there aren't any brackets on them for wall mounting, and between the two sets of terminal posts and the port, there's little room to install an aftermarket bracket, especially one strong enough to hold a speaker this heavy. Also, for the best frequency response, it is recommended to have more space between the rear port and the wall than a wall bracket would allow.

Q: What is the impedance rating of the Atmos towers?
A: The impedance rating of the Atmos towers is 4 ohms.

Q: Can you use the center speaker with Denon AVR-S70H? If so, what cable do I need?
A: Yes, you can use the center speaker with Denon AVR-S70H. You will need a standard speaker wire to connect it to your receiver.

Q: How many inches should the top shelf of a speaker stand measure?
A: There is no specific requirement for the top shelf of a speaker stand. However, generally speaking, you want speakers that will be about the same height as your head when in your most likely sitting listening/viewing position. You don't want to install these speakers too high - it would probably mess up the ATMOS feature.

Q: Why do the bookshelf and floor standing speakers have 4 speaker inputs each as opposed two standard two?
A: The bookshelf and floor standing speakers have four speaker inputs each because of their Atmos feature, which fires at the top of the speaker towards the ceiling.

Q: Would like to buy 4 SP-EFS73s to set up my non-Atmos receiver (equipped with bi-wiring). Can I connect it to bi-wiring without damaging the speakers?
A: No, these speakers are not bi-ampable or bi-wireable. The speaker has two separate speaker posts, but the top post is for the top firing Atmos speaker only. It is in a separate enclosure and treated as a separate speaker. It also has a high pass filter (Dolby Atmos guidelines) that has a crossover set at 150 or 180hz, so high frequencies only. If your receiver is not Atmos capable, then you simply wouldn't connect the top speakers. (But can if you upgrade your receiver). Do not bi-amp or bi-wire these speakers; you will damage them.

Q: How well would they work with a Yamaha R-S201 receiver?
A: All Yamaha AVR's & Receivers are capable of powering demanding loads such as 6ohm loads etc. The Yamaha R-S201 - receiver is an entry-level, "Audiophile" quality unit that will handily drive these Pioneer Elite's in a plain, 2.0 stereo mode. It's our bet that these Pioneer speakers will soar when driven by this Yamaha stereo unit. Yamaha uses "Audiophile" grade inner parts, like Burr-Brown DAC's. To answer your question, "Yes, they will work great with the Yamaha R-S201.