Pioneer Elite SP-EFS73 Andrew Jones Home Audio Floor Standing Speaker User Manual

Table of Contents

1. Introduction
2. Package Contents
3. Speaker Placement
4. Connecting the Speakers
5. Using Dolby Atmos
6. Troubleshooting
7. Frequently Asked Questions

1. Introduction

Thank you for purchasing the Pioneer Elite SP-EFS73 Andrew Jones Home Audio Floor Standing Speaker. This speaker is designed to provide professional-quality sound and an immersive listening experience in your living room. Before setting up and using your new speaker, please read this user manual carefully to ensure proper use and optimal performance.

2. Package Contents

• Pioneer Elite SP-EFS73 Floor Standing Speaker
• User Manual

3. Speaker Placement

For the best listening experience, follow these guidelines for speaker placement:

• Place the speaker on a stable, level surface.
• Position the speaker at least 2 feet away from any walls or other objects to minimize sound reflection.
• For optimal stereo imaging, place the speakers at an equal distance from your listening position, with the tweeters at ear level.

4. Connecting the Speakers

Follow these steps to connect your Pioneer Elite SP-EFS73 speaker to your audio system:

1. Turn off your audio system and unplug it from the power source.
2. Locate the speaker terminals on the back of the speaker. There are two sets of terminals: one for the main speaker and one for the Dolby Atmos-enabled driver.
3. Connect speaker wire from the main speaker terminals to the corresponding terminals on your audio system or receiver. Make sure to match the positive (+) and negative (-) terminals.
4. If using Dolby Atmos, connect speaker wire from the Dolby Atmos-enabled driver terminals to the corresponding terminals on your Dolby Atmos-compatible receiver or processor.
5. Plug your audio system back into the power source and turn it on.

5. Using Dolby Atmos

To experience Dolby Atmos with your Pioneer Elite SP-EFS73 speaker, you will need a Dolby Atmos-compatible speaker setup, a Dolby Atmos-compatible receiver/processor, and Dolby Atmos-encoded content. When properly set up, the top-firing concentric driver will provide a well-rounded sound landscape with overhead audio effects.

6. Troubleshooting

If you experience issues with your Pioneer Elite SP-EFS73 speaker, try the following troubleshooting tips:

• Ensure that all speaker connections are secure and that the positive (+) and negative (-) terminals are correctly matched.
• Check that your audio system or receiver is powered on and functioning properly.
• Verify that your audio source is properly connected and playing.
• Adjust the volume and speaker settings on your audio system or receiver.
• If using Dolby Atmos, confirm that your speaker setup, receiver/processor, and content are all Dolby Atmos-compatible.

7. Frequently Asked Questions

Q: Can I use this speaker for music as well as movies?
A: Yes, the Pioneer Elite SP-EFS73 speaker is designed for both music and movies, providing balanced sound across all major frequency bands for an enjoyable listening experience.

Q: Do I need a separate subwoofer with this speaker?
A: While the Pioneer Elite SP-EFS73 speaker features three 5-inch bass drivers for dynamic bass performance, adding a separate subwoofer can further enhance the low-frequency response and overall audio experience, especially for movies.

Q: Can I use this speaker in a surround sound setup?
A: Yes, the Pioneer Elite SP-EFS73 speaker can be used as part of a surround sound setup. It is a 3-way speaker, making it suitable for front left, right, or center channel positions in a multi-channel audio system.

Q: What is the impedance of this speaker?
A: The Pioneer Elite SP-EFS73 speaker has an impedance of 4 Ohms.

Q: How do I set up Dolby Atmos with this speaker?
A: To set up Dolby Atmos with the Pioneer Elite SP-EFS73 speaker, you will need a Dolby Atmos-compatible speaker setup, a Dolby Atmos-compatible receiver/processor, and Dolby Atmos-encoded content. Connect the Dolby Atmos-enabled driver terminals on the speaker to the corresponding terminals on your receiver or processor, and follow the setup instructions provided by your receiver/processor manufacturer.

Product FAQ:

Q: Can these speakers be used without enabling the Atmos part?
A: Yes, they can be used without connecting the separate ATMOS upward firing speaker. If you have a receiver with front height output, you can try connecting those to the upward firing speaker to see if you like it. The speakers sound fine playing "normal" stereo or surround sound, particularly with a subwoofer to handle the very low frequencies.

Q: Why do the bookshelf and floor standing speakers have 4 speaker inputs each as opposed to the standard two?
A: The extra inputs are for the Atmos feature, which fires at the top of the speaker towards the ceiling.

Q: Can I connect four SP-EFS73s to my non-Atmos receiver equipped with bi-wiring?
A: These speakers are not bi-ampable or bi-wireable. The speaker has two separate speaker posts, but the top post is for the top firing Atmos speaker only. It is in a separate enclosure and treated as a separate speaker. If your receiver is not Atmos capable, then you simply wouldn't connect the top speakers. Do not bi-amp or bi-wire these speakers as it will damage them.

Q: How many inches should the top shelf of a speaker stand measure?
A: There is no specific height requirement for these speakers, but generally, you want speakers that will be about the same height as your head when in your most likely sitting listening/viewing position. You don't want to install these speakers too high as it would probably mess up the Atmos feature.

Q: How well would these speakers work with a Yamaha R-S201 receiver?
A: All Yamaha AVR's & Receivers are capable of powering demanding loads such as 6ohm loads etc. The Yamaha R-S201 - receiver Specifications state it can deliver 50 Watts - 8 Ohm - 40 - 20000 kHz - THD 0.2% - 2 channels (main). So, this Yamaha 2.0 Receiver is an entry-level, "Audiophile" quality unit that will handily drive these Pioneer Elite's in a plain, 2.0 stereo mode.

Q: What center channel speaker would you recommend to match these speakers?
A: We recommend the AJ SP-EC73 cntr ch spkr. It comes with 2 curved rubber supports to isolate it from the shelf it sits on and adjust the up-down angle that suits your needs. Very nice looking and with the AVR's center ch volume adjustment capability, it really makes the dialog more clearly heard.

Q: Can these speakers be suspended from a wall?
A: No, there aren't any brackets on them for wall mounting, and there is little room to install an aftermarket bracket, especially one strong enough to hold a speaker this heavy. Also, for best frequency response, we recommend having more space between the rear port and the wall than a wall bracket would allow.

Response:

Thank you for your interest in the Pioneer Elite SP-EFS73 Andrew Jones Home Audio Floor Standing Speaker. Here are some answers to frequently asked questions about this product:

These speakers can be used without enabling the Atmos part. They sound fine playing "normal" stereo or surround sound, particularly with a subwoofer to handle the very low frequencies.

The bookshelf and floor standing speakers have four speaker inputs each for the Atmos feature, which fires at the top of the speaker towards the ceiling.

You cannot connect four SP-EFS73s to a non-Atmos receiver equipped with bi-wiring as these speakers are not bi-ampable or bi-wireable. The top post is for the top-firing Atmos speaker only, and it is in a separate enclosure treated as a separate speaker.

There is no specific height requirement for these speakers, but generally, you want speakers that will be about the same height as your head when in your most likely sitting listening/viewing position. You don't want to install these speakers too high as it would probably mess up the Atmos feature.

These speakers work well with a Yamaha R-S201 receiver. The Yamaha 2.0 Receiver is an entry-level, "Audiophile" quality unit that will handily drive these Pioneer Elite's in a plain, 2.0 stereo mode.

We recommend the AJ SP-EC73 cntr ch spkr as a center channel speaker to match these speakers. It comes with 2 curved rubber supports to isolate it from the shelf it sits on and adjust the up-down angle that suits your needs.

These speakers cannot be suspended from a wall as there aren't any brackets on them for wall mounting, and there is little room to install an aftermarket bracket, especially one strong enough to hold a speaker this heavy.