Skullcandy Hesh 2 Wireless Headphone - Black, 100% Electronics


Brand: Skullcandy
Manufacturer: Skullcandy, Inc.
Model Number: S6HBGY-374

Skullcandy Hesh 2 Wireless Over-Ear Headphone User Manual

Table of Contents

  1. Package Contents
  2. Charging the Headphones
  3. Turning the Headphones On/Off
  4. Pairing with Bluetooth Devices
  5. Controlling Music Playback and Calls
  6. Using the AUX Cable
  7. Troubleshooting
  8. FAQs

1. Package Contents

  • Skullcandy Hesh 2 Wireless Over-Ear Headphones
  • Micro USB Charging Cable
  • AUX Cable with Microphone and Remote
  • User Manual

2. Charging the Headphones

  1. Locate the micro USB port behind the left ear cup.
  2. Connect the provided micro USB charging cable to the headphones and a USB power source (computer, wall charger, etc.).
  3. An LED indicator will blink red when the battery is at 10%. The LED will turn off when fully charged.
  4. Allow up to 2.5 hours for a full charge. The headphones provide up to 15 hours of music playback when fully charged.

3. Turning the Headphones On/Off

  1. Press and hold the round power button located on the right ear cup for approximately 3 seconds.
  2. The LED indicator will blink blue when the headphones are turned on.
  3. To turn off the headphones, press and hold the power button for 3 seconds until the LED indicator stops blinking.

4. Pairing with Bluetooth Devices

  1. Ensure the headphones are turned off.
  2. Press and hold the power button for 5 seconds to enter pairing mode. The LED indicator will blink red and blue alternately.
  3. Enable Bluetooth on your device and search for available devices.
  4. Select "Skullcandy Hesh 2" from the list of available devices. Once connected, the LED indicator will blink blue.

5. Controlling Music Playback and Calls

  • Adjust volume: Press the plus (+) button to increase volume or the minus (-) button to decrease volume.
  • Change songs: Press and hold the plus (+) button to skip to the next song or the minus (-) button to return to the previous song.
  • Answer/end calls: Press the power button once to answer or end a call.
  • Reject calls: Press and hold the power button for 2 seconds to reject an incoming call.
  • Place calls on hold: Press the power button twice to place the current call on hold and answer a new call. Press the power button twice again to switch between calls.

6. Using the AUX Cable

  1. Plug the AUX cable into the headphone jack on the left ear cup and the other end into your device's 3.5mm audio jack.
  2. Control music playback and calls using the inline microphone and remote on the AUX cable.
  3. Note: The headphones will not consume battery power when using the AUX cable.

7. Troubleshooting

  • If you are unable to connect to a Bluetooth device, ensure the headphones are in pairing mode and your device's Bluetooth is turned on.
  • If the headphones are not charging, check the micro USB cable and the power source for any issues.
  • If you experience audio issues, ensure the headphones are fully charged and the Bluetooth connection is stable.

8. FAQs

Q: Can I use these headphones with a non-Bluetooth device?
A: Yes, you can use the included AUX cable to connect the headphones to any device with a 3.5mm audio jack.
Q: How do I know when the battery is low?
A: The LED indicator will blink red when the battery is at 10%. Charge the headphones using the provided micro USB cable.
Q: Can I use these headphones for phone calls?
A: Yes, the headphones have a built-in microphone and can be used to answer and make phone calls.
Q: How long does it take to fully charge the headphones?
A: It takes approximately 2.5 hours to fully charge the headphones.
Q: What is the wireless range of these headphones?
A: The wireless range is approximately 33 feet (10 meters) without obstacles.

FAQ [continued]

Product FAQ:

Q: Are these "on-ear" or "over-ear" headphones?
A: The Skullcandy Hesh 2 Wireless Over-Ear Headphones are over-ear headphones.

Q: Do these have a built-in mic?
A: Yes, these headphones have a built-in microphone located on the right ear cup.

Q: What does it mean by only 2.0?
A: These headphones utilize Bluetooth 2.0 standard for wireless connectivity. This standard provides an effective range of about 30 feet in most conditions.

Q: Just got them, will not connect to my USB Bluetooth. Do I need a separate transmitter to plug into the headphone jack?
A: No, you do not need a separate transmitter to use these headphones. Make sure that your device is compatible with Bluetooth 2.0 and try pairing again.

Q: How well does the microphone work? Many headphones I have searched have weak microphone performance when talking on the phone.
A: The microphone on these headphones may not be the best and may pick up noise around you. However, it should still be functional for phone calls.

Q: Will it work for my son's Kindle Fire?
A: Yes, these headphones should work with any device that is compatible with Bluetooth 2.0.

Q: Will they fall off when working out on a bench, like doing bench presses?
A: The headphones may slip off during intense physical activity. It is recommended to adjust the headband to prevent this from happening.

Q: Is it normal for the light next to the charging port not lighting up?
A: No, it is not normal for the charging port light to not come on when charging. Make sure that you are using a working USB port and try charging again.

Q: How do you switch between paired devices?
A: These headphones may automatically switch to a paired device if it is within range and the current device is disconnected.
Warranty (PDF)
Warranty (PDF)		User Manual (PDF)
User Manual (PDF)


Specifications

BrandSkullcandy
ManufacturerSkullcandy, Inc.
Model NumberS6HBGY-374
Product Dimensions8.07 x 3.74 x 8.46 inches
Item Weight1.04 pounds
DepartmentUnisex
ASINB00NCSIN4W
Domestic ShippingCurrently, item can be shipped only within the U.S. and to APO/FPO addresses. For APO/FPO shipments, please check with the manufacturer regarding warranty and support issues.
International ShippingThis item can be shipped to select countries outside of the U.S. Learn More
Country of OriginChina
Item model numberS6HBGY-374
Batteries1 Lithium Metal batteries required.
Customer Reviews4.6 out of 5 stars10,570 ratings4.6 out of 5 stars
Best Sellers Rank#120 in Over-Ear Headphones
Is Discontinued By ManufacturerNo
Date First AvailableMarch 13, 2015
ColorBlack
Connectivity TechnologyWired
Model NameHesh 2
Form FactorOver Ear
Weight1.04 pounds
Dimensions8.07 x 3.74 x 8.46 inches
First AvailableMarch 13, 2015



The content on this website is generated using the GPT (Generative Pre-trained Transformer) model, an artificial intelligence language model developed by OpenAI. While this technology is advanced and can produce highly coherent text, it is important for users to understand that the information and opinions expressed on this site may not be accurate, reliable, or up-to-date.
Please be aware that the GPT-generated content may include errors, inaccuracies, or misleading information, and should not be relied upon as a sole source of information or guidance. The website owner and its affiliates disclaim all liability for any loss, damage, or inconvenience that may arise from the use or reliance on the content provided.
We encourage users to verify any critical information obtained from this site with other reliable sources, and to consult with a qualified professional before making any decisions based on the content.
By using this website, you acknowledge and agree to these limitations and understand that the GPT-generated content is provided "as is" without any warranties or guarantees of any kind.