Vornado Evap40 4-Gallon Evaporative Humidifier User Manual

Table of Contents

1. Getting Started
2. Operating Instructions
3. Cleaning and Maintenance
4. Troubleshooting Tips
5. Frequently Asked Questions

1. Getting Started

Unpack your Vornado Evap40 Humidifier and ensure all components are included:

• Humidifier Base
• 2 Wick Filters
• 2 Removable Water Tanks
• Top Cover

Place the humidifier on a flat, stable surface, preferably on the floor. Ensure the area is large enough to accommodate both water tanks side by side. The humidifier should be positioned away from direct sunlight and heat sources.

2. Operating Instructions

Filling the Water Tanks

1. Remove the top cover by lifting it off the humidifier base.
2. Take out both water tanks and place them on a stable surface.
3. Fill each water tank with clean, cool tap water. Be sure not to overfill.
4. Place the filled water tanks back into the humidifier base, ensuring they are seated properly and securely.
5. Replace the top cover, making sure it is properly aligned and seated on the base.

Setting Your Desired Humidity Level and Fan Speed

On the control panel, you can select your desired humidity level and fan speed:

1. Turn the Humidistat Dial to set your desired humidity level. You can adjust the level as needed for your comfort.
2. Select your fan speed using the Fan Speed Control. There are three options: Low (750 RPM), Medium (1150 RPM), and High (1600 RPM).
3. Turn on the humidifier by pressing the Power Button.

The Evap40 will automatically adjust its operation to maintain your desired humidity level.

3. Cleaning and Maintenance

Regular Cleaning

It is recommended to clean the humidifier at least once every two weeks, or more often if needed:

1. Turn off and unplug the humidifier.
2. Remove the top cover and water tanks.
3. Empty any remaining water from the base and tanks.
4. Wipe the base, tanks, and top cover with a soft, damp cloth. Do not use abrasive cleaners or chemicals.
5. Allow all parts to dry completely before reassembling and using the humidifier.

Wick Filter Replacement

Replace the wick filters every 1-2 months, or more frequently if necessary. To replace the filters:

1. Turn off and unplug the humidifier.
2. Remove the top cover and water tanks.
3. Remove the old wick filters from the base.
4. Insert the new wick filters into the base, ensuring they are properly seated.
5. Reassemble the humidifier and resume normal operation.

4. Troubleshooting Tips

If you experience issues with your Vornado Evap40 Humidifier, try the following troubleshooting tips:

1. Ensure the humidifier is properly assembled and seated on a flat, stable surface.
2. Check that the water tanks are securely placed and filled with water.
3. Make sure the wick filters are properly installed and not clogged or damaged.
4. Verify that the power cord is securely plugged into a working electrical outlet.
5. Adjust the Humidistat Dial and Fan Speed Control to your desired settings.

If the problem persists, contact Vornado customer service for further assistance.

5. Frequently Asked Questions

How often should I replace the wick filters?

It is recommended to replace the wick filters every 1-2 months, or more frequently if necessary.

Can I use distilled water in the humidifier?

Yes, you can use distilled water in the Vornado Evap40 Humidifier. Using distilled water may help reduce mineral buildup and prolong the life of the wick filters.

How do I know when the water tanks are empty?

It can be difficult to see the water level in the tanks. Check the tanks regularly and refill them as needed to ensure continuous operation.

Is the Vornado Evap40 Humidifier suitable for large rooms?

Yes, the Evap40 is designed for rooms up to 1,000 sq. ft. and provides complete and uniform humidification.

What is the warranty on the Vornado Evap40 Humidifier?

The Vornado Evap40 Humidifier comes with a 5-year warranty, supported by a customer service team based in Andover, KS.

Q: What is the coverage area of the Vornado Evap40 Humidifier?
A: The Vornado Evap40 Humidifier can humidify spaces up to 1,000 sq. ft.

Q: How much water output does the Evap40 provide?
A: The Evap40 has a 4-gallon capacity and can provide up to 4 gallons of water output in 24 hours when operated continuously on high.

Q: What are the fan settings for the Evap40?
A: The Evap40 has three fan settings: low (750 RPM), medium (1150 RPM), and high (1600 RPM).

Q: Does the Evap40 have a humidistat?
A: Yes, the Evap40 has a built-in humidistat that allows you to choose your desired humidity level.

Q: How do I clean the Evap40?
A: The Evap40 is easy to clean. The two spill-proof and leak-free removable tanks are simple to clean and easy to refill.

Q: Does the Evap40 shut off automatically when the water tank is empty?
A: No, the Evap40 does not shut off automatically when the water tank is empty. However, it is not an issue because of the way this humidifier runs.

Q: What type of humidification method does the Evap40 use?
A: The Evap40 uses evaporative humidification, which uses a wick to naturally humidify all the air in the room without making a wet mess on the surfaces around it.

Q: Is there any risk of over-humidification with the Evap40?
A: It is unlikely that there will be over-humidification with the Evap40 since it is an evaporative humidifier that self-regulates based on the humidity in the room.

Q: Does using the Evap40 make the room cooler?
A: The air from the top of the Evap40 may be cooler than the room air by a degree or two due to its evaporative humidification method, but it should not affect the temperature of the room unless it is very small.

Q: Does the Evap40 come with filters?
A: The Evap40 does come with two wick filters.

Q: What type of wick filter does the Evap40 use?
A: The Evap40 can use either the MD1-0002 1.5" thick Filter Wick or the MD1-0034 1" thick Filter Wick. It can also use the MD1-0001 1.5" thick Filter Wick.

Q: What is Vornado's warranty policy for the Evap40?
A: Vornado offers a 5-year warranty for the Evap40 and will replace it if there are any issues.