NETGEAR Wi-Fi Range Extender EX3700 User Manual

Introduction

The NETGEAR Wi-Fi Range Extender EX3700 is designed to extend your existing Wi-Fi coverage and improve the signal strength for better wireless connectivity. This manual provides step-by-step instructions for setting up your EX3700, as well as troubleshooting tips and frequently asked questions.

Package Contents

• NETGEAR Wi-Fi Range Extender EX3700
• Quick Start Guide

Initial Setup

1. Plug the EX3700 into a wall outlet near your router. Wait for the Power LED to turn solid green.
2. Press the WPS button on your router.
3. Within two minutes, press the WPS button on the EX3700. The Router LED on the extender will turn green when connected to your router.
4. Use a Wi-Fi-enabled device (e.g., smartphone, tablet, laptop) to connect to the new extended network. The network names will be your existing network names with "_EXT" added at the end (e.g., "MyNetwork_2GEXT" and "MyNetwork_5GEXT").
5. Enter the same Wi-Fi password as your existing network.
6. Once connected, move the EX3700 to a location halfway between your router and the area with a weak Wi-Fi signal. Make sure the Router LED remains green in the new location.

Manual Setup Using a Web Browser

1. Connect your Wi-Fi-enabled device to the EX3700's default network. The default network names are "NETGEAR_EXT" (2.4GHz) and "NETGEAR_5GEXT" (5GHz).
2. Open a web browser and enter "mywifiext.net" in the address bar.
3. Click "New Extender Setup" and create an account.
4. Follow the on-screen instructions to connect the EX3700 to your existing Wi-Fi network.
5. Once connected, move the EX3700 to a location halfway between your router and the area with a weak Wi-Fi signal. Make sure the Router LED remains green in the new location.

Troubleshooting Tips

• If the Power LED does not turn green, press the Power button on the side of the EX3700.
• If the Router LED does not turn green, move the EX3700 closer to your router and try again.
• If you experience intermittent connection issues, try changing the Wi-Fi channel on your router or using the NETGEAR WiFi Analyzer app to find the best location for your EX3700.
• If the EX3700 stops working or becomes unresponsive, perform a factory reset by pressing and holding the Reset button on the side of the device for 7 seconds.

Frequently Asked Questions

Q: What is the maximum range of the EX3700?

A: The EX3700 can extend Wi-Fi coverage up to 1000 sq ft, depending on factors such as the location of the extender, the layout of your home, and interference from other devices.

Q: Can I use the EX3700 with any Wi-Fi router?

A: Yes, the EX3700 is universally compatible with any wireless router, gateway, or cable modem with Wi-Fi.

Q: How many devices can I connect to the EX3700?

A: The EX3700 can support up to 15 devices, including laptops, smartphones, speakers, IP cameras, tablets, and IoT devices.

Q: How do I update the firmware on my EX3700?

A: To update the firmware, log in to the extender's web interface at mywifiext.net and navigate to the Firmware Update section under the settings menu. Follow the on-screen instructions to check for and install any available updates.

Q: What is the coverage area of the NETGEAR Wi-Fi Range Extender EX3700?
A: The NETGEAR Wi-Fi Range Extender EX3700 can provide Wi-Fi range coverage up to 1000 sq ft.

Q: How many devices can be connected to the NETGEAR Wi-Fi Range Extender EX3700?
A: The NETGEAR Wi-Fi Range Extender EX3700 can connect up to 15 devices such as laptops, smartphones, speakers, IP cameras, tablets, IoT devices, and more.

Q: What is the Wi-Fi speed of the NETGEAR Wi-Fi Range Extender EX3700?
A: The NETGEAR Wi-Fi Range Extender EX3700 provides up to 750Mbps performance using dual-band and patented FastLane(TM) technology.

Q: Is the NETGEAR Wi-Fi Range Extender EX3700 compatible with any wireless router?
A: Yes, the NETGEAR Wi-Fi Range Extender EX3700 works with any wireless router, gateway, or cable modem with Wi-Fi.

Q: Does the NETGEAR Wi-Fi Range Extender EX3700 have a wired Ethernet port?
A: Yes, the NETGEAR Wi-Fi Range Extender EX3700 has one 10/100M Ethernet port that lets you easily connect a nearby wired device for faster transfer and uninterrupted connection.

Q: Is the NETGEAR Wi-Fi Range Extender EX3700 secure?
A: Yes, the NETGEAR Wi-Fi Range Extender EX3700 supports WEP and WPA/WPA2 wireless security protocols.

Q: How do I set up the NETGEAR Wi-Fi Range Extender EX3700?
A: You can press the WPS button to connect to your router or use the NETGEAR WiFi Analyzer app for optimal location. The setup process takes about 5 minutes.

Q: Can I set the SSID of the extender to the same SSID of the network it is extending?
A: Yes, you can configure the extender to the same SSID and password as the existing router via the browser interface to take advantage of WPA linking.

Q: Does the NETGEAR Wi-Fi Range Extender EX3700 create a new network or extend current Wi-Fi?
A: The NETGEAR Wi-Fi Range Extender EX3700 extends your network, but it also creates a new SSID (network name).

Q: Is it necessary to connect an Ethernet cable to the extender?
A: Technically, you do not need to connect an Ethernet cable to the extender. However, for optimal performance, it is recommended to remain connected to the router via Ethernet cable permanently.

Q: Can I use two NETGEAR Wi-Fi Range Extender EX3700s to extend my network in different directions?
A: Yes, as long as you plug them within range of your router, you can have each extend your router's signal in the direction they are located.