Klipsch RP-150M Bookshelf Speaker User Manual

Table of Contents

1. Introduction
2. Package Contents
3. Speaker Placement
4. Connecting the Speakers
5. Attaching the Grille
6. Troubleshooting Tips
7. Frequently Asked Questions

1. Introduction

Welcome to the Klipsch RP-150M Bookshelf Speaker! This high-quality speaker is designed to provide you with an unsurpassed listening experience. With its 1" Linear Travel Suspension Titanium Tweeter, 5.25" Spun Copper Cerametallic Cone Woofer, and 90x90 Hybrid Tractrix Horn, you'll enjoy a clean, natural sound that brings your music and movies to life.

2. Package Contents

• Two Klipsch RP-150M Bookshelf Speakers
• Two Removable Grilles
• User Manual

3. Speaker Placement

For optimal sound quality, place the speakers on a stable surface, such as a bookshelf or speaker stands. Position the speakers at ear level and angle them slightly towards the listening area. For a stereo setup, place the speakers at an equal distance from the listening position, forming an equilateral triangle.

4. Connecting the Speakers

1. Turn off your amplifier or receiver before connecting the speakers.
2. Strip the speaker wire to expose approximately 1/2 inch (12mm) of bare wire.
3. Insert the bare wire into the red and black binding posts on the back of the speaker, ensuring that the red post is connected to the positive (+) terminal and the black post is connected to the negative (-) terminal.
4. Tighten the binding posts to secure the wire in place.
5. Repeat the process for the other speaker.
6. Connect the other end of the speaker wire to the corresponding terminals on your amplifier or receiver, following the same color-coding.

5. Attaching the Grille

The removable grille attaches magnetically to the front of the speaker. Simply align the grille with the front of the speaker and let the magnets hold it in place. To remove the grille, gently pull it away from the speaker.

6. Troubleshooting Tips

• If there is no sound or distorted sound, check the speaker wire connections and ensure they are properly connected to the correct terminals.
• If the sound is unbalanced, adjust the balance control on your amplifier or receiver.
• If the bass or treble is lacking, adjust the tone controls on your amplifier or receiver.

7. Frequently Asked Questions

Can these speakers be wall-mounted?

Yes, the Klipsch RP-150M speakers can be wall-mounted using appropriate brackets or mounts (not included).

Do I need an amplifier or receiver to use these speakers?

Yes, the Klipsch RP-150M speakers are passive bookshelf speakers, which means they require an external amplifier or receiver to power them.

What is the recommended power range for these speakers?

The Klipsch RP-150M speakers have a recommended power range of 75-300 watts per channel.

Can I use these speakers as part of a home theater system?

Yes, the Klipsch RP-150M speakers can be used as part of a home theater system, either as front left and right channels or as surround speakers.

Product FAQ:

Q: Can I use the Klipsch RP-150M as surround speakers?
A: Yes, they can be used as rear or side surrounds in a home theater setup.

Q: Is there a center channel speaker that matches the looks and sound of the RP-150M?
A: The Klipsch RP-250C is a close match in appearance and sonic signature, while the Sony SS-CS8 is within the same width but does not match in appearance or sonics.

Q: Will the SMSL AD18 amplifier power these speakers?
A: Yes, these speakers are super efficient and can be powered by a 3 watt per channel tube stereo with a tube pre-amp, so the SMSL AD18 should have no problem powering them.

Q: Can banana plugs be used with these speakers without special adapters?
A: Yes, standard banana plugs can be used with these speakers.

Q: Can an amplifier with 100 watts per channel blow these speakers?
A: No, these speakers can handle peaks up to 300 watts and have a nominal rating of 75 watts, so they should be safe with an amplifier that has 100 watts per channel.

Q: Can these speakers work with a turntable that has a built-in pre-amp?
A: These are not amplified speakers, so if your turntable has a built-in pre-amp, you will need an amplification source such as a receiver or integrated amplifier.

Q: Is this the latest version of the Klipsch RP-150M?
A: Yes, this is the standard Reference Premier Monitor/Bookshelf speaker with 5" coned woofers. The latest Reference Premier Speakers released by Klipsch were Atmos/3D sound/Elevation speakers with the designation RP-xxxA.

Q: How do these compare to the Wharfedale Diamonds 10.1?
A: We cannot provide a comparison as we have not heard the Wharfedale Diamonds 10.1. However, Klipsch speakers typically have higher sensitivity than others of the same size, making them good for low to modestly powered systems.

Q: Are these compatible with the Yamaha amp A-S301?
A: Yes, these speakers are compatible with the Yamaha amp A-S301.

Q: Which would be better for side surround, the RP-150M or the RP-140SA?
A: The RP-240S would be a better option for side surrounds.

Response:

The Klipsch RP-150M bookshelf speakers can be used as rear or side surrounds in a home theater setup. The Klipsch RP-250C is a close match in appearance and sonic signature for use as a center channel speaker, while the Sony SS-CS8 is within the same width but does not match in appearance or sonics. These speakers are super efficient and can be powered by a 3 watt per channel tube stereo with a tube pre-amp, so amplifiers such as the SMSL AD18 should have no problem powering them. Standard banana plugs can be used with these speakers without special adapters. These speakers can handle peaks up to 300 watts and have a nominal rating of 75 watts, so they should be safe with an amplifier that has 100 watts per channel. If your turntable has a built-in pre-amp, you will need an amplification source such as a receiver or integrated amplifier as these are not amplified speakers. The Klipsch RP-150M is the standard Reference Premier Monitor/Bookshelf speaker with 5" coned woofers and is the latest version of this model. The Klipsch speakers typically have higher sensitivity than others of the same size, making them good for low to modestly powered systems. These speakers are compatible with the Yamaha amp A-S301. For side surrounds, the RP-240S would be a better option.