Klipsch RP-250S Surround Speaker User Manual

Table of Contents

1. Introduction
2. Package Contents
3. Installation
4. Connecting to an Amplifier/Receiver
5. Speaker Placement
6. Troubleshooting Tips
7. Frequently Asked Questions

1. Introduction

Thank you for purchasing the Klipsch RP-250S Surround Speaker. This speaker is designed to deliver top-performing and encompassing sound for an immersive audio experience. Please read this user manual carefully before setting up and using your new speaker.

2. Package Contents

• Klipsch RP-250S Surround Speaker
• Removable Grille
• User Manual

3. Installation

To install your Klipsch RP-250S Surround Speaker, follow these steps:

1. Choose a stable and level surface to place your speaker.
2. Attach the removable grille to the front of the speaker. The grille attaches magnetically for easy installation.

4. Connecting to an Amplifier/Receiver

To connect your Klipsch RP-250S Surround Speaker to an amplifier or receiver, follow these steps:

1. Ensure that your amplifier/receiver is turned off and unplugged from the power source.
2. Locate the speaker terminals on the back of the speaker. There are two terminals: one red (+) and one black (-).
3. Connect the speaker wire to the corresponding terminals on the back of the speaker and the amplifier/receiver. Make sure to match the positive (+) and negative (-) terminals on both the speaker and the amplifier/receiver.

5. Speaker Placement

For optimal surround sound performance, follow these speaker placement guidelines:

• Place the surround speakers to the left and right of your listening position, approximately 90-110 degrees from the center.
• Position the surround speakers slightly above ear level when seated, aiming towards the listening area.
• For a 5.1 channel setup, place the surround speakers directly to the sides of the listening area. For a 7.1 channel setup, place the side surround speakers directly to the sides and the rear surround speakers behind the listening area.

6. Troubleshooting Tips

If you experience any issues with your Klipsch RP-250S Surround Speaker, try the following troubleshooting tips:

1. Check that all connections between the speaker and the amplifier/receiver are secure and properly connected.
2. Ensure that the amplifier/receiver is turned on and set to the correct input source.
3. Verify that the volume on the amplifier/receiver is turned up to an audible level.
4. Try connecting the speaker to a different amplifier/receiver or a different audio source to determine if the issue is with the speaker or the audio source.

7. Frequently Asked Questions

What is the weight and dimensions of the Klipsch RP-250S Surround Speaker?

The speaker weighs 15.7 pounds and has dimensions of 7.92 x 12 x 13.5 inches.

Can I mount the Klipsch RP-250S Surround Speaker on a wall or speaker stand?

The speaker is designed for tabletop placement, but you can use a compatible speaker stand or wall mount if desired. Ensure that the stand or mount can support the weight of the speaker.

Is the Klipsch RP-250S Surround Speaker compatible with Dolby Atmos?

Yes, the Klipsch RP-250S Surround Speaker is Dolby Atmos ready, providing an immersive overhead soundstage when paired with a Dolby Atmos compatible amplifier/receiver and content.

Can I use the Klipsch RP-250S Surround Speaker as a front or center speaker in my home theater system?

The Klipsch RP-250S is designed as a surround speaker, but you can use it as a front or center speaker if desired. However, for optimal performance, it is recommended to use dedicated front and center speakers from the Klipsch Reference Premiere line.

Q: What are the specifications of the Klipsch RP-250S Surround Speaker?
A: The Klipsch RP-250S Surround Speaker has dual 1" Linear Travel Suspension Titanium Tweeter, dual 5.25" Spun Copper Cerametallic Cone Woofer, 90x90 Hybrid Tractrix Horn, MDF Cabinet with Brushed Polymer Veneer Baffle Finish, and a strong, flexible removable grille. Its dimensions are 7.92 x 12 x 13.5 inches and it weighs 15.7 pounds.

Q: Is this speaker wireless?
A: No, the Klipsch RP-250S Surround Speaker is not wireless. It is a passive speaker that requires a speaker wire connection to an AV receiver or amplifier for audio signal and power.

Q: Can I use this as rear surround in a 5.2.2 setup?
A: Yes, you can use the Klipsch RP-250S Surround Speaker as rear surround in a 5.2.2 setup.

Q: What is the recommended wattage for this speaker?
A: The Klipsch RP-250S Surround Speaker has a 100 Watt continuous power rating at 8 Ohms nominal with a 400 Watt peak. Klipsch recommends at least 80 Watts per channel at 8 Ohms for this model, and we also don’t recommend going over half way to the peak power on our speakers so the maximum recommended would be 200 Watts per channel at 8 Ohms.

Q: Can I put these on a floor stand?
A: Yes, you can put the Klipsch RP-250S Surround Speaker on a floor stand or mount them on the wall using the built-in keyhole style mount.

Q: Are there any speaker stands available for these speakers?
A: There are no specific speaker stands available for these speakers, but you can use any speaker stand that can support the weight and dimensions of the speaker.

Q: What is the difference between RP-240S and RP-250S?
A: The Klipsch RP-240S has two 4" woofers, while the Klipsch RP-250S has two 5.25" woofers. Make sure to check the product description before purchasing to ensure you are buying the correct model.

Q: Can I use these as the two rear speakers of a home stereo system?
A: Yes, you can use the Klipsch RP-250S Surround Speaker as the two rear speakers of a home stereo system.

Q: Is this speaker Dolby Atmos ready?
A: Yes, the Klipsch RP-250S Surround Speaker is Dolby Atmos ready. It delivers a hemisphere of sound that completely engulfs the listener in their movies and music with Klipsch's signature controlled directivity.