Primary manual page

Pyle VHF Wireless Microphone System (PDWM2135) - 2 Handheld Mics

The Pyle PDWM2135 is a VHF fixed dual frequency wireless microphone system that comes with two handheld dynamic transmitter mics and a receiver base. This microphone system delive…

Brand: PyleManufacturer: Sound AroundModel: PDWM2135Price reference: $38.99

Manual and instructions

Instruction-focused content generated from the current product data and source context.

Pyle Channel Microphone System PDWM2135 User Manual

Table of Contents

  1. Package Contents
  2. Setting Up the System
  3. Using the Microphones
  4. Troubleshooting Tips
  5. Frequently Asked Questions

1. Package Contents

  • 1 x Receiver
  • 2 x Wireless Handheld Dynamic Transmitter Microphones
  • 1 x 1/4" Mono Cable
  • 4 x AA Batteries

2. Setting Up the System

  1. Connect the receiver to a power source using the included AC 120V, 60Hz power supply.
  2. Plug the 1/4" mono cable into the output of the receiver and connect the other end to your mixer, amplifier, or speaker.
  3. Install the included AA batteries into each microphone by unscrewing the bottom of the microphone and inserting the batteries.
  4. Turn on the receiver and the microphones by switching the power ON/OFF switch to the ON position.
  5. Adjust the volume of each microphone using the independent volume controls on the receiver.

3. Using the Microphones

  • Ensure that both the receiver and the microphones are powered on.
  • Hold the microphone close to your mouth and speak or sing into it. The signal should transmit clearly to the receiver and output through your mixer, amplifier, or speaker.
  • Adjust the volume of each microphone as needed using the independent volume controls on the receiver.
  • When not in use, turn off the microphones and receiver to conserve battery life.

4. Troubleshooting Tips

  • If you experience static or interference, try moving the microphones and receiver closer together or adjusting the position of the antennas on the receiver.
  • If the microphones are not transmitting sound, ensure that the batteries are installed correctly and have sufficient charge.
  • If the microphones are not loud enough, ensure that the volume on both the microphones and the mixer, amplifier, or speaker is turned up sufficiently.
  • If the microphones are not working, check that the receiver is connected to an appropriate power source and that the 1/4" mono cable is securely connected to your mixer, amplifier, or speaker.

5. Frequently Asked Questions

Q: Can I use rechargeable batteries with the microphones?
A: Yes, you can use rechargeable AA batteries with the microphones. Make sure they are fully charged before use.
Q: What is the range of the microphones?
A: The microphones have a range of up to 10 meters, depending on the environment and any obstacles between the microphones and the receiver.
Q: Can I use this system with a speaker that has a 3.5mm input?
A: Yes, you can use a 1/4" to 3.5mm adapter to connect the receiver to a speaker with a 3.5mm input.
Q: Can I use this system for professional events or performances?
A: The Pyle PDWM2135 is designed for home use, small events, and karaoke. It may not be suitable for professional events or performances where high-quality audio is required.

Frequently asked questions

Q: What is the Pyle Channel Microphone System-VHF Fixed Dual Frequency Wireless Set with 2 Handheld Dynamic Transmitter Mics, Receiver Base-for PA, Karaoke, Dj Party (PDWM2135)?
A: The Pyle PDWM2135 is a wireless microphone system that includes a receiver base and two handheld dynamic transmitter mics. It operates on high-efficiency, low-consumption discharging techniques and features independent developed mobile frequency compression, expander circuitry, image frequency limiting circuits, multiple-checked silent and noise-free circuits, antenna diversity receiving circuit & switch impact noise defeat circuits.

Q: What are the features of the Pyle Channel Microphone System-VHF Fixed Dual Frequency Wireless Set with 2 Handheld Dynamic Transmitter Mics, Receiver Base-for PA, Karaoke, Dj Party (PDWM2135)?
A: The features of this microphone system include dual channel frequency design for broad audio response range with low distortion, high signal over noise ratio performance for capturing high quality audio, independent mic volume control for each dynamic or lav mic, and a convenient power switch for both the receiver and the mic. It also has LED status signal indicator light and dual independent antenna.

Q: What is included in the package of the Pyle Channel Microphone System-VHF Fixed Dual Frequency Wireless Set with 2 Handheld Dynamic Transmitter Mics, Receiver Base-for PA, Karaoke, Dj Party (PDWM2135)?
A: The package includes a receiver and 2 wireless handheld dynamic transmitter mics.

Q: Can I use two sets of Pyle Channel Microphone System-VHF Fixed Dual Frequency Wireless Set with 2 Handheld Dynamic Transmitter Mics (PDWM2135) at the same time without interfering with each other?
A: No, it is not possible to select a channel or frequency to avoid interference between two sets of this microphone system.

Q: Is this microphone system suitable for outdoor use, like an outdoor wedding ceremony?
A: This microphone system can be used outdoors and indoors, but it is not high-powered. You will need to plug it into an amplifier or speaker with a 1/4" mono cable.

Q: How long do the batteries last in the Pyle Channel Microphone System-VHF Fixed Dual Frequency Wireless Set with 2 Handheld Dynamic Transmitter Mics (PDWM2135)?
A: The microphones require two AA batteries each, which are not included. The battery life will depend on the type and quality of the batteries used.

Q: Can I use these microphones with a guitar amp?
A: It depends on whether there is a microphone input port on the guitar amp.

Source documents

Official manuals and related source files discovered for this product.

Specifications

Structured product details pulled from the latest available product data.

BrandPyle
ManufacturerSound Around
Model NumberPDWM2135
CategoryMusical Instruments > Microphones & Accessories > Microphones > Wireless Microphones & Systems > Handheld Wireless Microphones
ColorBlack
MaterialPlastic
Weight1.8 pounds
Dimensions10.75 x 3 x 12.75 inches
First AvailableFebruary 12, 2015
Item Weight1.8 Pounds
Microphone Form FactorMicrophone System
Item dimensions L x W x H10.75 x 3 x 12.75 inches
Power SourceBattery Powered
Number of Batteries4 AA batteries required.
Signal-to-Noise Ratio70 dB
Hardware PlatformKaraoke Machine
Number of Channels2
Frequency Response216 MHz
Noise Level70 dB
UPC068888758307
Product Dimensions10.75 x 3 x 12.75 inches
Country of OriginChina
ASINB00TOKTBL6
Item model numberPDWM2135
Batteries4 AA batteries required.
Customer Reviews4.0 4.0 out of 5 stars 4,941 ratings 4.0 out of 5 stars
Best Sellers Rank#573 in Musical Instruments (See Top 100 in Musical Instruments) #14 in Handheld Wireless Microphones & Systems
Is Discontinued By ManufacturerNo
Date First AvailableFebruary 12, 2015
Color NameBlack
Material TypePlastic
Recommended Uses For ProductSinging, Karaoke
Model Name(function(f) {var _np=(window.P._namespace("DetailPageProductOverviewTemplatesJava"));if(_np.guardFatal){_np.guardFatal(f)(_np);}else{f(_np);}}(function(P) { P.when('A').execute(function(A){ A.on('a:truncate:po-attribute-truncate-2:updated', function(data) { var isTruncated = !data.truncateInstance.getIfTextFits(); var seeMoreElement = document.getElementById('po-attribute-see-more-id-2'); if(seeMoreElement) { seeMoreElement.style.display = isTruncated ? '' : 'none'; } }) });})); Dual-Channel Wireless Microphone System - VHF Fixed Dual Frequency Wireless Mic Receiver Set with 2 Handheld Dynamic Transmitter Mics, Receiver Base - For PA, Karaoke, Dj Party - Pyle Pro PDWM2135 See more
Connectivity TechnologyWireless
Connector Type6.35 mm Jack
Special FeatureVolume Control
Compatible DevicesRadio, Amplifier, Speaker, Amplifier, Speaker
Included Components['Receiver Base', '(2) Wireless Handheld Microphones']
Polar PatternUnidirectional

Use this page carefully

ProductReviewGPT pages are AI-assisted summaries. When a source document is available, it should take priority over the generated summary for important operating, warranty, safety, or compliance details.