User Manual for Fischer 18092 Bicycle Carrier for 2 Bikes

Product Overview

The Fischer 18092 Bicycle Carrier is designed for the convenient transportation of two bikes on the roof of a vehicle. It is universally compatible with various types of bicycle frames, including oversized and Y-frames. The carrier allows for easy loading at handle height and is adaptable to most common transport systems and vehicles.

Specifications

• Brand: Fischer
• Model Number: 18092
• Weight of Item: 14.2 Kilograms
• Maximum Load Capacity: 30 kilograms
• Compatible Tire Widths: 20 to 47 mm
• Color: Grey
• Type of Fixation: Roof Support, Wall Support

Installation Instructions

1. Ensure your vehicle's roof is clean and free of debris before installation.
2. Check the compatibility of your roof bars. The carrier fits roof bars with a width of up to 40mm, despite the manufacturer's note of 80mm.
3. Assemble the carrier on the ground before mounting it on the vehicle. This will allow for easier adjustment of the retaining arms.
4. Position the carrier on your roof bars, ensuring it is centered and the bikes will be balanced when loaded.
5. Secure the carrier to the roof bars using the provided fixtures, adjusting as necessary to ensure a snug fit.
6. Load the first bike onto the carrier from the side of the vehicle, securing it according to the instructions.
7. Repeat the process for the second bike, loading it from the opposite side to balance the weight.
8. Once both bikes are secured, lift the carrier into the horizontal position and lock it in place.
9. Double-check all fixtures and fastenings are secure before setting off.

Troubleshooting Tips

Difficulty in Mounting Bikes

Ensure that the retaining arms are correctly adjusted to fit the specific size and shape of your bikes. It may take some trial and error on the first attempt.

Carrier Not Fitting Roof Bars

Verify that your roof bars are within the compatible size range. If they are too wide, you may need to purchase narrower bars.

Noise During Travel

Some wind noise is expected. Ensure that the bikes and carrier are secured tightly to minimize this. Consider using additional straps if necessary.

Carrier Feels Unstable

Double-check that all fixtures are properly tightened. Do not attempt to hang the carrier with the bikes attached from a wall, as this can be unsafe.

Frequently Asked Questions (FAQs)

Can this carrier hold electric bikes?

Yes, the carrier can hold electric bikes. However, it is recommended to remove the battery and any heavy accessories such as chain locks to reduce weight.

Is it difficult to assemble and install the carrier?

The initial assembly and installation can be time-consuming, taking up to two hours. It is advised to assemble the carrier well in advance of your trip.

Does the carrier fit all types of roof bars?

The carrier is designed to fit roof bars up to 40mm in width. It may not be compatible with certain vehicles' factory bars if they exceed this width.

Can the carrier be left on the vehicle when not in use?

Yes, the carrier can remain on the roof bars when not in use. However, for safety and to reduce wind resistance, it is advisable to remove it when not transporting bikes.

Is it possible to carry a tandem bike with this carrier?

Yes, this is one of the few models that can transport a tandem bike without disassembly.

How do I ensure the bikes are securely attached?

Follow the instructions to adjust the retaining arms to fit your bikes' frames snugly. Use the provided straps to secure the bikes to the carrier firmly.

Can I access my vehicle's trunk/boot with the bikes loaded?

Since the bikes are loaded on the roof, trunk/boot access should not be impeded. However, ensure that the bikes or carrier do not overhang and obstruct the trunk/boot when open.

What is the maximum weight capacity?

The carrier can support a maximum combined weight of 30 kilograms for two bikes.

For further assistance or questions about the Fischer 18092 Bicycle Carrier, please contact Fischer customer support.