AcuRite 06009RMA1 Temperature Sensor User Manual

Product Overview

The AcuRite 06009RMA1 is a wireless temperature sensor designed for use with compatible AcuRite weather station models. It measures outdoor or indoor temperature and transmits data every 30 seconds over a 433 MHz wireless signal.

Installation

1. Open the battery compartment and insert 2 AA alkaline or lithium batteries (not included). Lithium batteries are recommended for temperatures below -4°F/-20°C.
2. Close the battery compartment.
3. Select a channel setting (A, B, or C) on the sensor. Ensure it matches the channel setting on your weather station display.
4. Mount the sensor in a shaded, well-ventilated area, away from direct sunlight and moisture.
5. Place the sensor within the 165-foot (50-meter) range of your weather station display.

Pairing with Weather Station

1. After installing batteries and selecting the channel on the sensor, power cycle/reset the weather station display.
2. Wait for the weather station to detect the sensor signal. This may take a few minutes.

Troubleshooting Tips

Sensor Not Syncing

• Check that the sensor and weather station are set to the same channel (A, B, or C).
• Ensure the sensor is within range of the weather station and there are no obstructions or interference.
• Reset the weather station display and sensor by removing and reinserting the batteries.

Inaccurate Temperature Readings

• Move the sensor to a location away from heat sources and direct sunlight.
• Ensure the sensor is mounted in a well-ventilated area.
• Check the batteries and replace if necessary.

Sensor Not Transmitting

• Replace the batteries with new ones.
• Check for possible sources of interference, such as electronic devices or large metal objects.
• Move the sensor closer to the weather station display.

Frequently Asked Questions (FAQ)

Is this sensor compatible with the AcuRite Access?

No, the sensor is not compatible with the AcuRite Access or My AcuRite. It is designed to work with specific AcuRite weather station models.

How often does the sensor transmit data?

The sensor transmits temperature data every 30 seconds.

Can I use rechargeable batteries?

Yes, you can use AA rechargeable batteries, but lithium batteries are recommended for colder temperatures.

What should I do if my sensor is not working?

Refer to the troubleshooting tips above. If the sensor still does not work, contact AcuRite customer support for assistance.

How do I know if my weather station is compatible with this sensor?

Check the compatibility list provided in the product description to confirm if your weather station model is listed.

Where should I place the sensor?

Place the sensor in a shaded, well-ventilated area, away from direct sunlight, rain, or snow.

This HTML document provides a structured and formatted user manual and troubleshooting guide for the AcuRite 06009RMA1 Replacement Temperature Sensor, along with an FAQ section based on customer questions and product information.

FAQ [continued]

**Product FAQ: AcuRite 06009RMA1 Replacement Temperature Sensor**

**Q: Is this replacement temperature sensor compatible with all AcuRite models?**
A: This replacement sensor is compatible with a wide range of AcuRite models, including 00250, 00251W, 00380, 00415, 00417, 00420, and many more. Please refer to the compatibility list provided to ensure compatibility with your specific model.

**Q: How does the sensor transmit data?**
A: The sensor transmits temperature data wirelessly every 30 seconds using a 433 MHz signal with a range of up to 165 feet (50 meters).

**Q: What type of batteries does the sensor require?**
A: The sensor requires 2 AA alkaline or lithium batteries for operation. It is recommended to use lithium batteries for temperatures below -4 degrees Fahrenheit/-20 degrees Celsius.

**Q: Can this sensor be used with the AcuRite Access that connects to My AcuRite?**
A: No, this sensor is not compatible with the AcuRite Access system. It is designed specifically as a replacement temperature sensor for compatible AcuRite display units.

**Q: Is the sensor weather-resistant?**
A: Yes, this wireless sensor is weather-resistant and suitable for outdoor use to measure temperature accurately.

**Q: What are the dimensions and weight of the sensor?**
A: The sensor measures approximately 4.8 x 0.9 x 1.6 inches and weighs only 0.01 ounces, making it compact and easy to install in various locations.

**Q: How often do customers need to replace the batteries in the sensor?**
A: The batteries in the sensor typically need to be replaced based on usage and battery life. It is recommended to use lithium batteries for extended performance in colder temperatures.

**Q: Can customers expect accurate temperature readings from this replacement sensor?**
A: Customers have reported that this replacement sensor provides accurate temperature readings when used with compatible AcuRite weather stations. Proper setup and syncing may be required for optimal performance.

**Q: Is there any assembly required for installing this replacement temperature sensor?**
A: No assembly is required for installing this sensor. Customers can easily set it up by following the instructions provided by AcuRite for their specific model.

**Q: Where is this replacement temperature sensor manufactured?**
A: This replacement temperature sensor is manufactured in China by Chaney Instrument under the brand AcuRite.

Please note that additional information or specific inquiries can be directed to the manufacturer or seller of the product for further assistance.

User Manual (PDF)

Specifications

Brand	AcuRite
Manufacturer	Chaney Instrument
Model Number	06009RMA1
Category	Home & Kitchen
Item dimensions L x W x H	4.8 x 0.9 x 1.6 inches
Material	Lithium
Item Weight	0.01 Ounces
Style	Compact
Output Type	Digital
Sensing Distance	165 Feet
Specific Uses For Product	Temperature Sensor
UPC	072397060097
Global Trade Identification Number	00072397060097
Product Dimensions	4.8 x 0.9 x 1.6 inches
Item Weight	0.01 ounces
ASIN	B00V4R5EUO
Country of Origin	China
Item model number	06009RMA1
Batteries	2 AA batteries required.
Customer Reviews	4.5 4.5 out of 5 stars 12,481 ratings 4.5 out of 5 stars
Is Discontinued By Manufacturer	No
Assembly required	No
Batteries required	Yes
Included Components	Sensor
Weight	0.01 ounces
Dimensions	4.8 x 0.9 x 1.6 inches