California Air Tools 8010 Air Compressor User Manual

Introduction

Thank you for purchasing the California Air Tools 8010 Steel Tank Air Compressor. This manual provides important information on proper operation and maintenance. Every user of this compressor must read and understand this information before usage. Additionally, keep this manual for future reference.

Safety Information

Before operating the air compressor, ensure you have read and understood all safety instructions and warnings. Always wear protective equipment when using the compressor. Keep the compressor away from children and pets.

Product Specifications

• Max Pressure: 120 PSI
• Voltage: 110V / 60 Hz
• Noise level: 60 dBA
• Motor Horsepower: 1.0 HP (Rated / Running), 2.0 HP (Peak)
• Capacity: 8 Gallons
• Weight: 48 Pounds
• Dimensions: 26"L x 14"W x 23"H

Installation and Setup

1. Remove the air compressor from the packaging and inspect for any damage that may have occurred during shipping.
2. Attach the wheel kit according to the instructions provided in the package.
3. Position the air compressor on a stable, level surface.
4. Install the air filter as per the instructions in the manual.
5. Ensure the power switch is in the "OFF" position before plugging the unit into a power outlet.
6. Attach a ¼” Universal / Industrial Male Quick Connector to your hose (not included) to connect your hose to the air compressor.

Operation

1. Check the oil level and ensure it is at the correct level for operation.
2. Connect the air hose to the quick connector.
3. Plug the compressor into an appropriate power outlet.
4. Turn the power switch to the "ON" position to start the compressor.
5. Adjust the pressure using the regulator knob to suit your tool's requirements.
6. When finished, turn the power switch to the "OFF" position and unplug the unit.

Maintenance

Regular maintenance is crucial for the longevity and proper functioning of your air compressor. Refer to the maintenance schedule in the manual for detailed instructions.

Troubleshooting Tips

• Compressor won't start: Check if the power cord is plugged in and if the power outlet is functioning. Ensure the power switch is turned on.
• Low pressure: Check for any leaks in the air hose or fittings. Ensure the tank is properly pressurized and the regulator is correctly adjusted.
• Excessive noise or vibration: Make sure the compressor is on a stable and level surface. Check for loose parts or damage.
• Overheating: Allow the compressor to cool down if it has been running for an extended period. Check for adequate ventilation around the compressor.

Frequently Asked Questions (FAQ)

Q: Does this air compressor come with a hose?

A: No, a hose is not included. You will need to purchase a ¼” Universal / Industrial Male Quick Connector to attach your hose to the air compressor.

Q: What is the noise level of this compressor?

A: The noise level is 60 dBA, which is very quiet compared to other compressors.

Q: Can this compressor be used for painting?

A: Yes, it can be used for painting with the appropriate attachments and settings.

Q: What is the warranty for this air compressor?

A: The California Air Tools 8010 Air Compressor comes with a 1-year limited warranty.

Q: Is the motor oil-free?

A: Yes, the pump is oil-free, which means less maintenance and no oil spills.