Klipsch RP-140SA Dolby Atmos Speaker User Manual

Introduction

The Klipsch RP-140SA Dolby Atmos Speaker is designed to enhance your home audio experience by adding Dolby Atmos functionality to your existing floor standing or bookshelf speakers. With its Linear Travel Suspension (LTS) Titanium Tweeter and Spun Copper Cerametallic Woofers, this speaker delivers exceptional performance and durability. This user manual will guide you through the setup, usage, and troubleshooting of your new Dolby Atmos speakers.

Package Contents

• 2 x Klipsch RP-140SA Dolby Atmos Speakers
• User Manual

Speaker Setup

1. Place the RP-140SA speakers on top of your existing floor standing or bookshelf speakers, ensuring they are securely positioned.
2. Connect the speaker wires from your AV receiver or amplifier to the RP-140SA speakers, ensuring proper polarity (+ to + and - to -).
3. On your AV receiver, configure the speaker settings to enable Dolby Atmos functionality. Consult your receiver's user manual for specific instructions on how to do this.
4. Run the auto-calibration feature on your AV receiver, if available, to optimize the speaker settings for your room.
5. Adjust the speaker settings manually, if needed, to fine-tune the audio performance based on your listening preferences and room layout.

Usage

To fully experience Dolby Atmos, play content that has been encoded with Atmos or DTS:X audio. Most 4K Ultra HD Blu-ray movies and some non-4K Blu-ray movies support these formats. Your AV receiver may also have an up-converter feature that simulates the Atmos effect for non-Atmos content.

Troubleshooting Tips

If you encounter issues with your Klipsch RP-140SA Dolby Atmos Speakers, try the following troubleshooting tips:

• Double-check speaker wire connections to ensure proper polarity and secure connections.
• Verify that your AV receiver supports Dolby Atmos and is configured correctly for Atmos playback.
• Ensure that you are playing content encoded with Atmos or DTS:X audio.
• Adjust the speaker settings on your AV receiver to fine-tune the audio performance based on your listening preferences and room layout.

Frequently Asked Questions

Can the RP-140SA speakers be wall-mounted?

Yes, these speakers have a slot on the back for wall mounting, with no additional accessories necessary.

What is the recommended crossover setting for these speakers?

Klipsch recommends setting the crossover at 100Hz, although you may be able to set it at 80Hz, which is the Dolby THX standard.

Can these speakers be used as regular surround speakers?

While some users have reported using the RP-140SA speakers as regular surround speakers, they are primarily designed for Dolby Atmos and height channel applications. For surround speakers, consider using speakers with a more dynamic frequency range.

How many speakers are included in the package?

This package includes a pair (2) of Klipsch RP-140SA Dolby Atmos Speakers.

What is the peak power handling of these speakers?

The Klipsch RP-140SA Dolby Atmos Speakers can handle up to 200 watts at 8 ohms of peak power.

Product: Klipsch RP-140SA Dolby Atmos Speaker - Electronics

Manufacturer Provided Details:
- Linear Travel Suspension (LTS) Titanium Tweeter for enhanced, detailed performance
- Spun Copper Cerametallic Woofers for exceptional rigidity and minimal distortion
- Beautiful finish and strong grilles for seamless integration into any decor
- Adds Dolby Atmos experience to any floor standing/bookshelf speaker
- Dimensions: 11.3 x 6 x 7 inches; Weight: 12 ounces
- Connectivity Technology: Auxiliary; Speaker Type: Outdoor
- Model Name: RP-140SA; Mounting Type: Floor Mount, Shelf Mount

FAQ:
Q: Can these speakers be used as standard surround speakers at 8 feet high if I do not have an atmos avr and am running klipsh towers, center and sub?
A: These speakers are not meant to mount "high" and are designed to sit on top of your towers for a little background noise, especially if your receiver isn't Atmos compatible. It is recommended to install them in the ceiling for a better surround sound experience.

Q: If these were mounted on the rear wall at the recommended height as atmos speakers (not surround) would it still give the same atmos experience?
A: Yes, it would still provide the same atmos experience as long as they are mounted at the recommended height and location according to Dolby Labs.

Q: I currently have klipsch rf-82 fronts. Will these work well on top of those?
A: Yes, you can use them on top of your RF-82 fronts, but they will need a separate speaker connection from your receiver to the Atmos speakers. For best results, the seating area should be around 10-14 feet from the tower speakers and the ceiling height less than 12ft.

Q: Can I buy 4 of these and use two for surround position and 2 on top of my r26f? I won't be using r 14 s than. I am using marantz sr5011.
A: Yes, you can use them for surround and/or atmos according to Klipsch's website.

Q: How do these compare to svs prime elevation?
A: We are not familiar with the SVS prime elevation speakers, but the Klipsch RP-140SA speakers work well as intended as additional speakers in a multi-speaker system or for "faux" ATMOS overhead effect on appropriate recordings or movies.

Q: Does this come with wall mounts in the box?
A: These speakers will not come with separate wall mounts in the box, but they do come with "keyhole" mounts already installed. You can use these to hang the speakers off a screw in the wall.

Q: Do these come with speaker covers?
A: Yes, they do come with speaker covers.

Q: Why are these angled?
A: They are angled so that if sitting on floor speakers, the sound will bounce off the ceiling and angle down to the listener, or if they are mounted on the ceiling, will not shoot the sound straight down but will angle it toward the listener.

Q: How do you hang these speakers? Does it come with something?
A: With the slanted configuration of the speaker, these Klipschs are not intended to be hung or used as surround speakers in a 5.1 or 7.1 set-up. They are intended for placement on top of front tower speakers, so that their sound is radiated upward for reflection off the ceiling, thus providing a "faux ATMOS" effect in rooms and locations which are not amenable to installation of the usual ceiling speakers called for in a true Dolby ATMOS set-up. The speakers come with 4 rubber feet and no hardware for hanging, as they are intended for placement as just described on the flat tops of your front R/L Main speakers.

Q: Does this Klipsch Dolby Atmos come as a set for $299?
A: Yes, it comes as a set of 2 speakers for $299. However, for $35 more, you can get the larger version: Klipsch R-41SA, which is the 2nd pair of Atmos speakers.