Skullcandy Smokin' Buds 2 Wireless In-Ear Earbud User Manual

Table of Contents

1. Getting Started
2. Charging the Earbuds
3. Pairing the Earbuds with a Bluetooth Device
4. Using the Onboard Mic and Remote
5. Troubleshooting Tips
6. Frequently Asked Questions

1. Getting Started

Congratulations on your purchase of the Skullcandy Smokin' Buds 2 Wireless In-Ear Earbuds! These earbuds are designed to provide you with a comfortable and high-quality audio experience, featuring Bluetooth connectivity and a 6-hour battery life. Before using your earbuds, please read this user manual to ensure the best possible experience.

2. Charging the Earbuds

Your Smokin' Buds 2 Wireless earbuds come with a micro USB to USB charging cable. To charge the earbuds, follow these steps:

1. Connect the micro USB end of the cable to the charging port on the earbuds.
2. Connect the USB end of the cable to a USB charger or a computer's USB port.
3. Charge the earbuds for approximately 2.5 hours or until the LED indicator turns off.

3. Pairing the Earbuds with a Bluetooth Device

To pair your Smokin' Buds 2 Wireless earbuds with a Bluetooth-enabled device, follow these steps:

1. Ensure that your Bluetooth device is turned on and its Bluetooth function is enabled.
2. Power on your Smokin' Buds 2 Wireless earbuds by pressing and holding the middle button on the onboard mic/remote for 5-10 seconds until the LED indicator flashes red and blue.
3. On your Bluetooth device, search for available Bluetooth devices and select "Smokin' Buds 2 Wireless" from the list.
4. Once connected, the LED indicator on your earbuds will flash blue.

4. Using the Onboard Mic and Remote

The onboard mic and remote located under the left earbud allow you to manage your music and phone calls easily. Here are the functions of each button:

• Middle Button: Press to play/pause music or answer/end calls.
• Plus Button: Press to increase volume or press and hold to skip to the next track.
• Minus Button: Press to decrease volume or press and hold to skip to the previous track.

5. Troubleshooting Tips

If you encounter any issues while using your Smokin' Buds 2 Wireless earbuds, try the following troubleshooting tips:

• Ensure that your earbuds are charged and turned on.
• Check that your Bluetooth device is turned on and its Bluetooth function is enabled.
• Make sure that your earbuds are within the Bluetooth range of your device (approximately 33 feet or 10 meters).
• Try resetting your earbuds by turning them off and then on again.
• If you are still experiencing issues, contact Skullcandy customer support for assistance.

6. Frequently Asked Questions

Q: How long does the battery last on the Smokin' Buds 2 Wireless earbuds?
A: The battery lasts for up to 6 hours of continuous use. Battery life may vary depending on usage and volume levels.

Q: How do I remove the flex collar?
A: The flex collar can be easily removed by sliding it off the earbuds. You can also use the provided "S" clip to adjust the fit or secure the cables in place.

Q: Can I use these earbuds for phone calls?
A: Yes, the Smokin' Buds 2 Wireless earbuds have a built-in microphone that allows you to make and receive phone calls.

Q: Can I connect these earbuds to multiple devices at the same time?
A: No, the Smokin' Buds 2 Wireless earbuds can only be connected to one device at a time.

Q: Are these earbuds waterproof or sweatproof?
A: The Smokin' Buds 2 Wireless earbuds are not specifically designed to be waterproof or sweatproof. It is recommended to keep them away from excessive moisture to prolong their lifespan.

Q: What is the battery life of the Skullcandy Smokin' Buds 2 Wireless earbuds?
A: The earbuds have a battery life of up to 6 hours.

Q: Can the collar be adjusted for a better fit?
A: Yes, the low profile and removable flex collar can be adjusted using notches in the collar or the provided "S" clip.

Q: Does the product come with replacement earbud tips?
A: Yes, the product comes with two pairs of silicone ear gels in small and medium sizes.

Q: Does the earbud have a mute function?
A: No, there is no mute button on the earbud, but it can be done through your phone.

Q: Can more than one device be paired with the earbuds?
A: Yes, but you have to disconnect from one device to pair with another by holding down the vol up and down buttons together.

Q: What is included in the box?
A: The box includes the Smokin’ Buds 2 Wireless earbuds, a micro USB to USB charging cable, and two pairs of silicone ear gels (small and medium).

Q: Is there a known issue with pairing these earbuds with iPhones running iOS 9 or above?
A: Yes, there is a known issue with pairing these earbuds with iPhones running iOS 9 or above. Skullcandy is working on a solution and suggests contacting them for warranty support if needed.

Q: How long does it take to fully recharge the battery?
A: It takes approximately 2.5 hours to fully recharge the battery.

Q: What is Skullcandy's signature sound quality like?
A: Skullcandy's signature sound quality features attacking bass, crisp vocals, and precision highs for high-quality audio.