Bose Virtually Invisible 891 In-Wall Speaker User Manual

Table of Contents

1. Introduction
2. Package Contents
3. Installation
4. Connecting the Speakers
5. Troubleshooting Tips
6. Frequently Asked Questions

1. Introduction

Thank you for purchasing the Bose Virtually Invisible 891 In-Wall Speaker. These high-quality speakers are designed to provide you with full-range performance and balanced stereo sound throughout your room. This user manual will guide you through the installation and connection process to help you get the most out of your new speakers.

2. Package Contents

• 2 x Bose Virtually Invisible 891 In-Wall Speakers
• 2 x Paintable Grilles
• Installation Guide

3. Installation

Before you begin the installation process, ensure that you have the necessary tools and equipment. You will need a stud finder, level, pencil, drywall saw, and a drill with a 1/8-inch bit.

1. Using a stud finder, locate and mark the studs in the wall where you want to install the speakers.
2. Place the speaker grille on the wall between the studs and use a level to ensure it is straight. Trace the outline of the grille onto the wall with a pencil.
3. Carefully cut along the traced outline with a drywall saw, removing the drywall to create the opening for the speaker.
4. Insert the speaker into the opening and secure it using the built-in dogleg clamps. Tighten the clamps until the speaker is firmly in place.
5. Attach the paintable grille to the speaker using the included magnets.

4. Connecting the Speakers

To connect the speakers to your audio system, follow these steps:

1. Turn off your audio system and disconnect it from the power source.
2. Run speaker wire from your audio system or amplifier to the location of the in-wall speakers.
3. Strip the ends of the speaker wire and connect the positive (+) wire to the red terminal and the negative (-) wire to the black terminal on the back of the speaker.
4. Connect the other end of the speaker wire to the corresponding terminals on your audio system or amplifier.
5. Power on your audio system and test the speakers to ensure they are working correctly.

5. Troubleshooting Tips

If you encounter any issues with your Bose Virtually Invisible 891 In-Wall Speakers, try these troubleshooting tips:

• Ensure that your audio system or amplifier is turned on and connected to a power source.
• Check that the speaker wire connections are secure and properly connected to the correct terminals on both the speakers and the audio system or amplifier.
• Verify that the audio source is playing and the volume is turned up.
• If the sound is distorted, reduce the volume on your audio system or amplifier.
• If the issue persists, contact Bose customer support for further assistance.

6. Frequently Asked Questions

Q: Do these speakers come with a template for cutting the wall opening?

A: The speakers do not include a separate template, but you can use the grille as a template by tracing its outline onto the wall.

Q: Can I paint the grilles to match my wall color?

A: Yes, the grilles are easily paintable to blend seamlessly with your room's design. Simply remove the grilles and paint them with your desired color.

Q: Do I need a subwoofer to complement these speakers?

A: While the Bose Virtually Invisible 891 In-Wall Speakers provide high-quality, full-range performance, adding a subwoofer can enhance the overall sound quality, especially for lower frequencies.

Q: Can I use these speakers as front left and right speakers in a surround sound system?

A: Yes, the Bose Virtually Invisible 891 In-Wall Speakers can be used as front left and right speakers in a surround sound system, providing balanced stereo sound throughout the room.

Q: What are the specifications of the Bose Virtually Invisible 891 In-Wall Speaker?
A: The Bose Virtually Invisible 891 In-Wall Speaker has one 7" woofer and two strategically positioned 1" tweeters. It provides high-quality, full-range performance that most other installed speakers can't match. It also has exclusive Stereo Everywhere speaker performance that covers the room with balanced stereo sound and no drop-offs. The speaker has a near-bezel-less construction that blends elegantly into the room's design, easily paintable grilles, and standard dogleg clamps and magnetically attached grilles that make installation fast and easy.

Q: What is included in the package?
A: The package includes a pair of Bose Virtually Invisible 891 In-Wall Speakers and their corresponding grilles.

Q: What is the difference between the Bose Virtually Invisible 891 and the 691?
A: The performance specs of both models are the same, but the 891 is a larger design than the 691.

Q: How many speakers can be run off one Bose amplifier?
A: Multiple speakers can be run off one Bose amplifier, but it ultimately depends on the specific amplifier model and its power output.

Q: Can I mount the Bose Virtually Invisible 891 speakers on the wall?
A: These speakers are designed to be mounted in-wall. If you want to mount them on the wall, you would need to build a box for them.

Q: Do I need a center speaker or subwoofer for a basement setup using three pairs of Bose Virtually Invisible 891 speakers and a Sony STRDN1080 receiver?
A: A subwoofer is recommended, but there is no need for a center speaker with these speakers as they provide clear and balanced stereo sound.

Q: How do I paint the grilles of my Bose Virtually Invisible 891 speakers?
A: It is recommended to spray paint the grilles using a colorimeter to match the color of your room. Do not brush or roll paint on the grilles as it may affect the acoustics.

Q: What is the recommended air space behind the wall for the Bose Virtually Invisible 891 speakers?
A: The air space behind the wall does not matter much, but it is recommended to use fiberglass insulation batting if desired.

Q: Are templates included for cutting out the wall for installation?
A: Unfortunately, some customers have reported that templates were not included in their package. However, you can use the speaker itself as a template by flipping it over and using its outline to cut out the wall.

Q: What is the weight and dimensions of each Bose Virtually Invisible 891 In-Wall Speaker?
A: Each speaker weighs 13.5 pounds and has dimensions of 15.8 x 13 x 11.1 inches.

Q: Is there a warranty for the Bose Virtually Invisible 891 In-Wall Speaker?
A: The warranty for Bose products varies by region and retailer. It is recommended to check with your local retailer or contact Bose customer service for more information.