3M WorkTunes Connect + AM/FM Hearing Protector with Bluetooth Technology User Manual

Table of Contents

1. Product Overview
2. Getting Started
3. How to Use the Headset
4. Troubleshooting
5. FAQ

1. Product Overview

The 3M WorkTunes Connect + AM/FM Hearing Protector with Bluetooth Technology is a versatile headset designed to provide ear protection and entertainment during various activities, such as mowing, snowblowing, construction, and work in shops. The headset features Bluetooth wireless technology, integrated microphone, AM/FM radio, Audio Assist technology, and a Noise Reduction Rating (NRR) of 24 dB.

2. Getting Started

2.1 Package Contents

• WorkTunes Connect + AM/FM Hearing Protector with Bluetooth Technology
• User Manual

2.2 Battery Installation

The headset requires 2 AA batteries (not included). To install the batteries, follow these steps:

1. Open the battery compartment located on the right earcup.
2. Insert the batteries according to the polarity markings inside the compartment.
3. Close the battery compartment.

3. How to Use the Headset

3.1 Turning On/Off the Headset

To turn the headset on or off, press and hold the power button located on the right earcup for 2 seconds. A voice prompt will confirm the power status.

3.2 Bluetooth Pairing

To pair the headset with a Bluetooth-enabled device, follow these steps:

1. Turn on the headset.
2. Press and hold the Bluetooth button on the right earcup for 3 seconds until you hear "pairing" and the LED indicator starts flashing blue and red.
3. On your Bluetooth device, go to the Bluetooth settings and search for available devices.
4. Select "3M WorkTunes" from the list of devices to pair.
5. Once successfully paired, you will hear "connected" and the LED indicator will turn solid blue.

3.3 Making and Receiving Phone Calls

To make a phone call, use your paired Bluetooth device to dial the number. The audio will be routed through the headset. To answer an incoming call, press the phone button on the right earcup. To reject a call, press and hold the phone button for 2 seconds.

3.4 Listening to AM/FM Radio

To switch between AM and FM radio, press the AM/FM button on the right earcup. To tune the radio, press the seek buttons (up/down) to search for available stations. To save a station as a preset, press and hold the preset button (P) until you hear a beep.

3.5 Adjusting Volume

To adjust the volume, use the volume buttons (+/-) located on the right earcup. The headset will self-adjust to ensure you are listening at a safe volume level throughout your workday.

4. Troubleshooting

If you encounter any issues with your headset, try the following steps:

• Ensure the batteries are properly installed and not depleted.
• Turn the headset off and then back on.
• Reset the Bluetooth connection by turning off Bluetooth on your device and then turning it back on.
• Consult the user manual for additional guidance.

5. FAQ

Q: Can I use the headset while charging?

A: The headset uses 2 AA batteries and does not have a charging feature. You can use rechargeable AA batteries and charge them separately.

Q: How do I change the ear cushions?

A: To change the ear cushions, gently pull the existing cushions away from the headset and replace them with new ones by aligning the cushion's tabs with the slots on the headset.

Q: Can I use the headset with a hat or cap?

A: Yes, the headset is designed with a flexible, vented headband that is compatible with hats and caps.

Q: What is the warranty for this product?

A: The headset comes with a manufacturer warranty. Please contact the manufacturer for more information on the warranty terms and conditions.

Product FAQ:

Q: What is the Noise Reduction Rating (NRR) of the 3M WorkTunes Connect + AM/FM Hearing Protector with Bluetooth Technology?
A: The NRR of this product is 24 dB.

Q: Does this product have Bluetooth wireless technology?
A: Yes, this product has Bluetooth wireless technology that allows you to stream entertainment from your mobile phone and any other Bluetooth enabled device.

Q: Can I make and receive phone calls while wearing these headphones?
A: Yes, you can make and receive phone calls without removing the ear protection thanks to the integrated microphone.

Q: Does this product have an AM/FM radio?
A: Yes, this product has an excellent AM/FM radio performance with clear sound and bass boost option for great listening.

Q: What is Audio Assist Technology?
A: Audio Assist Technology provides operational and set-up guidance­–without having to take off the headset.

Q: How long is the battery life when using Bluetooth?
A: The battery life is very good on these headphones. You can get about 24 hours of music off a couple of cheap batteries before you'll need to replace them. An outstanding feature is that long before the batteries go dead, a woman's voice comes over the radio and says LOW BATTERY, so you get a heads up to change them out before they die.

Q: How long does the battery last on a full charge?
A: You can usually go about a week and a half on a full charge. It takes a long time to charge.

Q: Is the rechargeable battery replaceable?
A: Yes, the 3M ALPHA1100 Rechargeable Li-Ion Battery Pack is replaceable.

Q: Does this product have an aux in jack for connecting to a wired audio source?
A: Yes, it does have an audio input jack for wired audio sources.

Q: Which replacement earpieces should I use for these headphones?
A: The correct replacement earpieces are 3M HY79.

Q: Why won't WorkTunes connect to Bluetooth?
A: If you're having trouble connecting to Bluetooth, try turning off your phone's Bluetooth and then turning it back on. "WorkTunes Connect" should appear on your iPhone. Then quickly tap the headphone button to connect.

Q: Do these headphones work well in protecting from loud saws?
A: Yes, they do work well in protecting from loud saws. The NRR of 24 dB lessens the noise to only about 30 decibels, and you can play your music at the same time.