Yamaha RX-S601BL Receiver User Manual

Table of Contents

1. Introduction
2. Getting Started
3. Connecting Devices
4. Setting up Wi-Fi and Bluetooth
5. Using Streaming Services
6. Controlling with the AV Controller App
7. Adjusting Audio Settings
8. Using Zone 2 Audio and Party Mode
9. Troubleshooting
10. Frequently Asked Questions

1. Introduction

The Yamaha RX-S601BL Receiver is a 5.1-channel Slimline AV Receiver with built-in Bluetooth and Wi-Fi compatibility. It supports high-resolution audio playback and 4K Ultra HD pass-through with HDCP 2.2. This user manual will guide you through the setup and usage of your Yamaha RX-S601BL Receiver.

2. Getting Started

Before you begin, ensure that you have the following items included with your Yamaha RX-S601BL Receiver:

• Yamaha RX-S601BL Receiver
• Remote control
• 2 AA batteries (for the remote control)
• AM and FM antennas
• YPAO microphone
• CD with user manual

3. Connecting Devices

Connect your devices to the Yamaha RX-S601BL Receiver using the appropriate cables. The receiver has 6 HDMI inputs, 2 optical inputs, and several analog inputs. Follow these steps to connect your devices:

1. Turn off all devices before connecting cables.
2. Connect your TV to the HDMI output on the back of the receiver.
3. Connect your other devices (Blu-ray player, game console, etc.) to the HDMI inputs on the back of the receiver.
4. If you have devices with optical or analog outputs, connect them to the corresponding inputs on the back of the receiver.
5. Connect the AM and FM antennas to their respective terminals on the back of the receiver.
6. Connect your speakers to the appropriate speaker terminals on the back of the receiver.

4. Setting up Wi-Fi and Bluetooth

To set up Wi-Fi and Bluetooth on your Yamaha RX-S601BL Receiver, follow these steps:

1. Press the "Setup" button on the remote control.
2. Select "Network" and press "Enter."
3. Select "Wi-Fi" and press "Enter."
4. Select "Wi-Fi Setup" and press "Enter."
5. Follow the on-screen instructions to connect to your Wi-Fi network.
6. Once connected to Wi-Fi, you can enable Bluetooth by selecting "Bluetooth" in the "Network" menu and pressing "Enter."
7. Select "Bluetooth Setup" and press "Enter."
8. Follow the on-screen instructions to pair your Bluetooth devices.

5. Using Streaming Services

The Yamaha RX-S601BL Receiver supports several music streaming services, such as Spotify, Pandora, and Internet radio. To access these services, follow these steps:

1. Press the "NET" button on the remote control.
2. Select the desired streaming service and press "Enter."
3. Follow the on-screen instructions to log in to your account or activate the service.

6. Controlling with the AV Controller App

The Yamaha RX-S601BL Receiver can be controlled using the AV Controller App on your smartphone or tablet. To use the app, follow these steps:

1. Download the AV Controller App from the App Store or Google Play Store.
2. Connect your smartphone or tablet to the same Wi-Fi network as the receiver.
3. Open the app and select your Yamaha RX-S601BL Receiver from the list of available devices.
4. Use the app to control various functions of the receiver, such as input selection, volume control, and audio settings.

7. Adjusting Audio Settings

To adjust the audio settings on your Yamaha RX-S601BL Receiver, follow these steps:

1. Press the "Setup" button on the remote control.
2. Select "Speaker" and press "Enter."
3. Select the desired speaker setting, such as "Size," "Level," or "Distance," and press "Enter."
4. Adjust the setting using the left and right arrow buttons on the remote control.
5. Press "Setup" again to exit the menu.

8. Using Zone 2 Audio and Party Mode

Zone 2 audio allows you to send 2-channel stereo audio to a second zone, while the main zone plays a 3-channel output. To use Zone 2 audio and Party Mode, follow these steps:

1. Connect speakers for the second zone to the "Zone 2" speaker terminals on the back of the receiver.
2. Press the "Zone" button on the remote control to switch between the main zone and Zone 2.
3. Select the desired input source for Zone 2 using the input selection buttons on the remote control.
4. To use Party Mode, press the "Party Mode" button on the remote control. This will play the same audio source in both zones.

9. Troubleshooting

If you encounter any issues while using your Yamaha RX-S601BL Receiver, try the following troubleshooting tips:

• Ensure all cables are securely connected to the appropriate inputs and outputs.
• Check the speaker connections and make sure they are connected to the correct terminals.
• Reset the receiver to its factory settings by pressing and holding the "Straight" button on the front panel while turning on the receiver.
• Update the receiver's firmware by connecting it to the internet and selecting "Firmware Update" in the "Setup" menu.

10. Frequently Asked Questions

Q: Can I use the receiver without connecting it to the internet?

A: Yes, you can use the receiver without connecting it to the internet. However, you will not be able to access streaming services or use the AV Controller App without an internet connection.

Q: How do I update the receiver's firmware?

A: To update the receiver's firmware, connect it to the internet and select "Firmware Update" in the "Setup" menu. Follow the on-screen instructions to complete the update.

Q: Can I connect a turntable to the receiver?

A: Yes, you can connect a turntable to the receiver using the analog inputs on the back of the receiver. However, if your turntable requires a phono preamp, you will need to connect it to a separate phono preamp before connecting it to the receiver.

Q: How many HDMI inputs does the receiver have?

A: The Yamaha RX-S601BL Receiver has 6 HDMI inputs. However, only input 6 supports HDCP 2.2.

Q: What is the name of the DAC and Specs of the DAC on this unit?
A: The Yamaha RX-S601BL Receiver uses Burr-Brown 192 kHz/24-bit DACs for all channels.

Q: Does this support ARC?
A: Yes, the Yamaha RX-S601BL Receiver supports Audio Return Channel (ARC).

Q: Does this Amp work in 220Volts if I shift to India from USA?
A: The Yamaha RX-S601BL Receiver is rated for 110-120V AC, 50/60Hz. It may not work with 220V AC in India without a voltage converter.

Q: How does this Yamaha compare to the Marantz 7.2 ch slim line av?
A: While we cannot provide a direct comparison between the Yamaha RX-S601BL Receiver and the Marantz slim line AV receiver, the Yamaha offers advanced features such as MusicCast wireless audio support, built-in Wi-Fi, Bluetooth, and compatibility with high-resolution audio codecs.

Q: Does the 7.4 inch height include the wifi antenna? If yes, what is the height of the unit without the antenna?
A: The height of the Yamaha RX-S601BL Receiver with the Wi-Fi antenna included is 7.44 inches. Without the antenna, the height is 4.38 inches.

Q: What is the depth of the unit? There appears to be a discrepancy from what other sites say.
A: The dimensions of the Yamaha RX-S601BL Receiver are 20.98 x 15.71 x 7.44 inches (W x D x H). The depth of the unit is approximately 15.71 inches.

Q: When using party mode, is there any delay between the audio on the main zone and zone 2?
A: We cannot confirm if there is any delay between audio on the main zone and Zone 2 when using party mode.

Q: In addition to hooking up a TV to this unit for surround, is it possible to use a second TV as an audio-only input?
A: Yes, it is possible to connect a second TV to the Yamaha RX-S601BL Receiver for audio-only input using the TV's audio output and connecting it to the receiver's auxiliary input.

Q: Do I need a new receiver for my new LG OLED65C7P? My current receiver is a Yamaha RX-V565 that I purchased in 2009.
A: The Yamaha RX-S601BL Receiver can support 4K Ultra HD pass-through with HDCP 2.2 support, making it compatible with your LG OLED65C7P TV. However, if you require additional features or channels, you may consider upgrading to a different receiver.

Q: Is there an FM tuner in this receiver, or do I need to buy a separate tuner?
A: Yes, the Yamaha RX-S601BL Receiver has an AM/FM tuner built-in.