NOCO Boost Pro GB150 User Manual

Instructions for Use:

Getting Started:

• Charge your NOCO Boost Pro GB150 before first use by connecting it to a USB power source using the provided Micro USB Charging Cable.
• Ensure that the battery level is sufficient for the intended use by checking the LED indicator.

Jump Starting a Vehicle:

1. Make sure the vehicle is turned off.
2. Connect the needle-nose battery clamps to the GB150.
3. Attach the red clamp to the positive (+) battery terminal and the black clamp to a metal surface on the vehicle's frame away from the battery.
4. Power on the GB150 by pressing the power button.
5. If the connections are correct and safe, the LED indicator will light up, and you can attempt to start the vehicle.
6. Once the vehicle is started, carefully disconnect the clamps, starting with the black clamp followed by the red clamp.

Charging USB Devices:

• Connect your USB device to the USB out port on the GB150 using a compatible USB cable.
• Press the power button to begin charging your device.

Using the LED Flashlight:

• Press and hold the power button for 3 seconds to turn on the flashlight.
• Press the power button to cycle through the seven light modes: low, medium, high, flashing, strobe, SOS, and off.

Troubleshooting Tips:

Jump Starter Won't Power On:

• Ensure the GB150 is charged.
• Check for any damage to the unit or cables.

Vehicle Won't Start:

• Make sure the clamps are properly connected to the correct terminals.
• Verify that the GB150 has sufficient charge.
• Check if the vehicle's battery is functional and not beyond recovery.

USB Device Not Charging:

• Ensure the USB cable is properly connected to both the GB150 and your device.
• Check if the USB device is compatible with the GB150's charging feature.

LED Flashlight Not Working:

• Press and hold the power button for 3 seconds to ensure it is not in a different mode.
• Check the battery level to ensure there is enough power to use the flashlight.

Frequently Asked Questions (FAQs)

How long does it take to fully charge the NOCO Boost Pro GB150?

The GB150 can be fully recharged in approximately 6 hours using a 2.1-amp USB charger, or as quickly as 2 hours using the vehicle's auxiliary port.

Can the GB150 jump start any vehicle?

The GB150 is designed to jump start gasoline engines up to 9.0 liters and diesel engines up to 7.0 liters, making it suitable for cars, boats, trucks, and more.

Is the GB150 safe to use?

Yes, the GB150 features spark-proof technology and reverse polarity protection to ensure safe operation.

What does the IP65 rating mean?

The IP65 rating indicates that the GB150 is dust-tight and protected against water projected from a nozzle, making it suitable for outdoor use.

Can I use the GB150 to power other devices?

Yes, the GB150 features a 12-volt, 15-amp outport port for powering 12VDC devices, and it can also charge USB devices such as smartphones and tablets.

What is included in the box?

Inside the box, you will find the GB150 UltraSafe Portable Lithium Car Battery Jump Starter Pack, needle-nose battery clamps, XGC male and female connectors, XGC cable, Micro USB charging cable, microfiber storage bag, user guide, and a 1-year warranty.

How many lumens does the LED flashlight have?

The integrated LED flashlight on the GB150 has 500 lumens with seven light modes, including emergency strobe and SOS.

How many jump starts can the GB150 perform on a single charge?

It can perform up to 40 jump starts on a single charge, depending on the condition of the vehicle's battery and other environmental factors.

How much does the GB150 weigh?

The GB150 weighs 7.5 pounds, making it portable and easy to handle.

**Product FAQ: NOCO Boost Pro GB150 3000 Amp Jump Starter**

**Q: What are the key features of the NOCO Boost Pro GB150 3000 Amp Jump Starter?**
A: The NOCO Boost Pro GB150 is a powerful 3000-amp jump starter suitable for gasoline and diesel engines up to 10 liters. It also functions as a portable power bank, LED flashlight, and 12-volt power source. It features spark-proof technology, reverse polarity protection, and is safe to use.

**Q: How many jump starts can I expect on a single charge with the GB150 Jump Starter?**
A: The GB150 Jump Starter can provide up to 40 jump starts on a single charge, making it reliable for emergency situations.

**Q: Is the NOCO Boost Pro GB150 portable and easy to use?**
A: Yes, the GB150 is designed to be compact, lightweight (7.5 pounds), and user-friendly. It can be easily recharged via any powered USB port in 6 hours at 2.1-amps.

**Q: What safety features does the NOCO Boost Pro GB150 offer during jump starting?**
A: The GB150 provides spark-proof technology and reverse polarity protection, ensuring safe connections to any 12-volt automotive battery without risks of incorrect connections or sparks.

**Q: Can the NOCO Boost Pro GB150 be used in various weather conditions?**
A: Yes, the GB150 features high-discharge lithium technology for safe operation in any climate. Its rugged and water-resistant enclosure (rated IP65) makes it suitable for use in different environments.

**Q: What accessories are included with the NOCO Boost Pro GB150 Jump Starter?**
A: The package includes the GB150 UltraSafe Portable Lithium Car Battery Jump Starter Pack, Needle-Nose Battery Clamps, XGC Male and Female Connectors, XGC Cable, Micro USB Charging Cable, Microfiber Storage Bag, User Guide, and a 1-Year Warranty.

**Q: What are some additional features of the NOCO Boost Pro GB150 Jump Starter?**
A: The GB150 features an integrated 500-lumen LED flashlight with seven light modes, including emergency strobe and SOS. It also has a 12-volt, 15-amp outport port for powering various devices like tire inflators and inverters.

**Q: Is the NOCO Boost Pro GB150 backed by any warranty?**
A: Yes, the product comes with a 1-Year Warranty and is designed in the USA for quality assurance.

Please note that product dimensions may slightly differ from those listed. For more detailed information, refer to the user guide included in the package or contact NOCO customer support.