Klipsch RP-Hub1 HD Control Center User Manual

Table of Contents

1. Introduction
2. Package Contents
3. Product Overview
4. Setting Up Your System
5. Connecting Devices
6. Speaker Configuration
7. Troubleshooting Tips
8. Frequently Asked Questions

1. Introduction

Welcome to the Klipsch RP-Hub1 HD Control Center, a cutting-edge wireless home theater system that delivers unparalleled cinema-quality sound. This user manual will guide you through the setup and use of your new HD Control Center.

2. Package Contents

• Klipsch RP-Hub1 HD Control Center
• Power Adapter
• Remote Control
• User Manual

3. Product Overview

The Klipsch HD Control Center features:

• 4x HDMI with 4k Pass-through (1 port includes HDMI 2.0 and HDCP 2.2 support)
• 2x Digital Audio (1x Coaxial and 1x Optical)
• 1x Analog Audio
• Bluetooth wireless technology
• 3.5mm IR input
• 8 channel WiSA-compliant wireless audio up to 24-bit/96kHz

4. Setting Up Your System

1. Place the Klipsch HD Control Center on a flat surface near your TV or projector.
2. Connect the power adapter to the HD Control Center and plug it into a power outlet.
3. Turn on the HD Control Center using the power button on the front panel or the remote control.
4. Connect your devices (such as a Blu-ray player, game console, or cable box) to the appropriate inputs on the back of the HD Control Center.

5. Connecting Devices

To connect your devices to the Klipsch HD Control Center, use the appropriate cables (HDMI, coaxial, optical, or analog) to connect each device to the corresponding input on the back of the HD Control Center. For Bluetooth connection, follow the instructions provided by your device to pair it with the HD Control Center.

6. Speaker Configuration

To configure your Klipsch Reference Premiere HD Wireless speakers, follow these steps:

1. Place your speakers in the desired positions in your room.
2. Turn on each speaker using the power button on the back panel.
3. Press the Smart Speaker Selector button on the rear of each speaker until the light lands on the current position of the speaker (e.g., front left, front right, etc.).
4. The HD Control Center will automatically recognize and connect new speakers as they are added to your system.

7. Troubleshooting Tips

• If you experience connectivity issues, try power cycling the HD Control Center and the speakers by turning them off and then back on.
• Ensure that your devices are connected to the correct inputs on the HD Control Center.
• If you experience audio dropouts or interference, move the HD Control Center and speakers away from other electronic devices that may cause interference.
• Update the firmware of your HD Control Center and speakers to the latest version by registering your system on the Klipsch website.

8. Frequently Asked Questions

Q: Can I expand my system to include more speakers?

A: Yes, you can begin your system with as few as two speakers and grow it over time, up to a 7.2 surround-sound home theater. Your system will automatically recognize and connect new speakers as they are added.

Q: Can I use this system with Dolby Atmos or DTS:X?

A: Currently, the Klipsch HD Control Center supports up to 7 surround sound speakers and 2 subwoofers. To integrate Dolby Atmos or DTS:X, Klipsch would need to release a new hub with support for additional channels for ceiling (aiming) speakers.

Q: What is the range of the wireless connection between the HD Control Center and the speakers?

A: The wireless range between the HD Control Center and the speakers depends on your room's layout and any potential sources of interference. However, the system is designed to work reliably in most home theater setups.

Q: Can I use an optical out from my TV to connect this to my TV?
A: Yes, you can use the optical out from your TV to connect to the Klipsch RP-Hub1 HD Control Center.

Q: Which type of wireless speakers does this control center hub work with?
A: The RP-Hub1 was designed to be used with the HD Wireless speakers and can also be used with newer Reference Wireless speakers.

Q: Is the Bluetooth with apt x?
A: According to Adorama, it supports aptX.

Q: What is the maximum power of the Hub1 Control Center?
A: The control center does not have power, as the speakers are active and have their own power.

Q: Does this have expandability for Dolby Atmos?
A: No, it doesn't. While they have hinted that it could come in the future, at present it is 7.2 capable.

Q: Can I calibrate audio parameters in this system in a way like YPAO?
A: Yamaha's YPAO does not work via an HDMI connection. The manual adjustments in this Hub are a greatly inferior substitution.

Q: Will this work with Klipsch RW-34C?
A: Yes, it will.

Customer Review:
Purchased this and 7 HD Wireless Surround Sound Speakers and 2 Subwoofers from Klipsch
I purchased this Klipsch RP-Hub1 HD Control Center along with 2 RP-440WF HD Wireless Floor Standing Speakers, 1 RP-440WC HD Wireless Center Channel Speaker, 4 RP-140WM HD Wireless Bookshelf Speakers and 2 RP-110WSW HD Wireless Subwoofers for a full 7.2 Surround Sound Setup. I couldn't be happier. The setup is easier in that it's okay if you placed a plant, lamp or furniture in the way of the speakers since the Aperion speakers used sonar to calibrate the delay, etc. Yes, the Klipsch doesn't have that, you have to manually set it which is a small price to pay since there's no 60lbs amp or 100 feel of speaker wire that I have to route. It's also easier to assign each speaker, just press the button on the back and each speaker position will light up. Just stop when the light lands on the current position of the speaker and you're done. It's never given me issues with connecting either. I literally have zero complaints. The ONLY improvement would be somehow getting this to do Dolby Atmos and DTS X but based on the research that I've done, the wireless hub can only support 7 surround sound speakers and 2 subwoofers.