Fluance Signature HiFi Surround Sound Home Theater 5.0 Channel Speaker System User Manual

Table of Contents

1. Introduction
2. What's Included
3. Setting Up Your Speaker System
4. Connecting Speakers to Your Receiver
5. Wall Mounting the Speakers
6. Troubleshooting Tips
7. Frequently Asked Questions

1. Introduction

Congratulations on your purchase of the Fluance Signature HiFi Surround Sound Home Theater 5.0 Channel Speaker System. This speaker system is designed to provide you with an immersive audio experience for movies, music, and more. With a focus on sound excellence, every detail has been measured, tested, and perfected to ensure high fidelity sound.

2. What's Included

• HFF Signature Series HiFi Floorstanding (pair)
• HFS Surround Sound Speakers (pair)
• HFC Center Channel Speaker
• 2x Floorstanding Grills, 2x Bookshelf Grills, Center Channel Grill
• 4x Outrigger Stabilizers
• 8x Isolation floor spikes
• 4x Wall Mounting Brackets
• Quick Start Guide
• Fluance Catalog
• Lifetime Customer Support

3. Setting Up Your Speaker System

To set up your Fluance Signature HiFi Surround Sound Home Theater 5.0 Channel Speaker System, follow these steps:

1. Place the HFF Signature Series HiFi Floorstanding speakers on either side of your TV or projector screen, at least 6 feet apart.
2. Position the HFC Center Channel Speaker directly below or above your TV or projector screen.
3. Place the HFS Surround Sound Speakers on either side of your seating area, facing the listening position.
4. Attach the outrigger stabilizers to the bottom of the floorstanding speakers and secure them with the included screws.
5. Install the isolation floor spikes on the outrigger stabilizers to minimize floor reverberation.

4. Connecting Speakers to Your Receiver

To connect your Fluance Signature HiFi Surround Sound Home Theater 5.0 Channel Speaker System to your receiver, follow these steps:

1. Turn off your receiver and unplug it from the power source.
2. Strip approximately 1/2 inch of insulation from the ends of your speaker wire.
3. Connect the speaker wire to the corresponding terminals on the back of each speaker, ensuring that the positive (+) terminal on the speaker is connected to the positive (+) terminal on the receiver, and the negative (-) terminal on the speaker is connected to the negative (-) terminal on the receiver.
4. Secure the speaker wire connections by tightening the binding posts or inserting the wire into the spring clips, depending on your speaker and receiver connections.
5. Plug your receiver back into the power source and turn it on.

5. Wall Mounting the Speakers

If you prefer to wall mount the HFS Surround Sound Speakers and HFC Center Channel Speaker, follow these steps:

1. Attach the included wall mounting brackets to the back of each speaker using the provided screws.
2. Choose a suitable location on your wall for each speaker, ensuring they are at the correct height and angle for optimal sound quality.
3. Attach the wall mounting brackets to the wall using appropriate hardware for your wall type (not included).
4. Slide the speakers onto the wall mounting brackets until secure.

6. Troubleshooting Tips

If you are experiencing issues with your Fluance Signature HiFi Surround Sound Home Theater 5.0 Channel Speaker System, try the following troubleshooting tips:

• Ensure all speaker wire connections are secure and properly connected to the correct terminals.
• Check that your receiver is set to the correct input source.
• Verify that your receiver's volume is not muted or set too low.
• Confirm that your receiver's speaker settings are configured correctly for your speaker system.
• Try a different audio source to determine if the issue is with the source material or the speaker system.

7. Frequently Asked Questions

What receiver should I use with this speaker system?

The Fluance Signature HiFi Surround Sound Home Theater 5.0 Channel Speaker System is compatible with receivers that have a power output of 90-200 watts per channel. Ensure that your receiver is compatible with 8-ohm speakers.

Do I need a subwoofer with this speaker system?

While the Fluance Signature HiFi Surround Sound Home Theater 5.0 Channel Speaker System provides powerful bass performance, adding a subwoofer will enhance the low-frequency response for a more immersive audio experience.

What type of speaker wire should I use?

It is recommended to use 14-gauge speaker wire for optimal performance and efficiency.

How long is the break-in period for these speakers?

The break-in period for the Fluance Signature HiFi Surround Sound Home Theater 5.0 Channel Speaker System is approximately 10 hours. During this time, the speakers will continue to improve in sound quality.

Can I use banana plugs with these speakers?

Yes, you can use banana plugs with the Fluance Signature HiFi Surround Sound Home Theater 5.0 Channel Speaker System for a more efficient and secure connection.

Q: What is included in the Fluance Signature HiFi Surround Sound Home Theater 5.0 Channel Speaker System?
A: The system includes a pair of HFF Signature Series HiFi Floorstanding speakers, a pair of HFS Surround Sound Speakers, and an HFC Center Channel Speaker. It also comes with 2 floorstanding grills, 2 bookshelf grills, a center channel grill, 4 outrigger stabilizers, 8 isolation floor spikes, and 4 wall mounting brackets.

Q: What is the power handling recommendation for this speaker system?
A: The power handling requirement for these speakers is 90-200 watts RMS.

Q: What is the frequency response range for the tower speakers?
A: The tower speakers have a frequency response range of 35Hz - 20kHz.

Q: Are the cabinets acoustically inert?
A: Yes, the cabinets are precision crafted with engineered MDF wood to create a warm, distortion-free sound.

Q: What are the dimensions and weight of the speaker system?
A: The product dimensions are 34.22 x 18.9 x 47.24 inches and it weighs 88.4 pounds.

Q: Does the set include a subwoofer?
A: No, this set does not include a subwoofer. However, it can be paired with a separate subwoofer for added bass performance.

Q: Are the speakers compatible with an 8 ohm impedance?
A: Yes, all of the speakers in this set are compatible with an 8 ohm impedance.

Q: Is there a warranty or customer support available for this product?
A: Yes, Fluance provides lifetime customer support and a warranty on their products.