Sangean WR-50P FM-RBDS/AM/Bluetooth Wood Cabinet Table Top Stereo Digital Receiver System User Manual

Table of Contents

1. Introduction
2. Package Contents
3. Device Layout
4. Initial Setup
5. Radio Operation
6. Bluetooth Operation
7. Alarm and Timer Functions
8. Troubleshooting
9. Frequently Asked Questions

1. Introduction

Thank you for purchasing the Sangean WR-50P FM-RBDS/AM/Bluetooth Wood Cabinet Table Top Stereo Digital Receiver System. This manual will guide you through the setup, operation, and troubleshooting of your new digital receiver system.

2. Package Contents

• WR-50P Receiver
• External Speaker
• Remote Control
• AC Adapter
• Owner's Manual
• Warranty Card

3. Device Layout

Familiarize yourself with the device layout, including the receiver, external speaker, remote control, and connections on the back of the receiver.

4. Initial Setup

1. Connect the external speaker to the receiver using the provided speaker cable.
2. Plug the AC adapter into the back of the receiver and into a power outlet.
3. Install 2 AAA batteries into the remote control.
4. Turn on the receiver by pressing the power button on the front panel or on the remote control.
5. Adjust the display brightness by pressing the 'Dimmer' button on the remote control.

5. Radio Operation

1. Press the 'Source' button on the front panel or remote control to select 'AM' or 'FM' mode.
2. Extend and adjust the FM antenna for optimal reception.
3. Use the 'Tuning' buttons on the front panel or remote control to manually tune to your desired radio station.
4. Press and hold the 'Preset' button on the remote control to enter preset mode. Use the 'Tuning' buttons to select a preset number, and press 'Preset' again to store the current station to that preset.
5. Adjust the bass and treble settings using the 'Bass' and 'Treble' buttons on the remote control.
6. Enable or disable loudness compensation by pressing the 'Loudness' button on the remote control.

6. Bluetooth Operation

1. Press the 'Source' button on the front panel or remote control to select 'Bluetooth' mode.
2. Enable Bluetooth on your smartphone, tablet, or other Bluetooth-enabled device.
3. Pair your device with the WR-50P by selecting it from the list of available Bluetooth devices on your device.
4. Once paired, you can stream music from your device to the WR-50P.
5. Use the 'Play', 'Pause', and 'Skip' buttons on the remote control to control playback from your device.

7. Alarm and Timer Functions

1. Press the 'Timer' button on the remote control to set the alarm timer. Use the 'Tuning' buttons to adjust the alarm time, and press 'Timer' again to confirm.
2. Select the alarm source (radio or buzzer) by pressing the 'Alarm' button on the remote control.
3. Press the 'Sleep' button on the remote control to set the sleep timer. Use the 'Tuning' buttons to adjust the sleep time, and press 'Sleep' again to confirm.
4. Press the 'Snooze' button on the remote control to activate the snooze function for the alarm.

8. Troubleshooting

• If the receiver does not power on, check the AC adapter connection and ensure that the power outlet is functioning.
• If the remote control is not working, check the batteries and ensure that they are installed correctly.
• If you are experiencing poor radio reception, adjust the position of the receiver and/or antenna. Keep the receiver away from other electronic devices and power cords that may cause interference.
• If you are unable to pair your Bluetooth device, ensure that the WR-50P is in Bluetooth mode and that your device's Bluetooth is enabled. Try restarting your device and/or resetting its Bluetooth settings.

9. Frequently Asked Questions

1. Q: Can I adjust the balance between the two speakers?
   A: The WR-50P does not have a balance control feature. However, you can adjust the placement and angle of the speakers to achieve your desired sound balance.
2. Q: Can I connect a subwoofer to the WR-50P?
   A: Yes, the WR-50P has a subwoofer output that allows you to connect a powered subwoofer for a true 2.1 stereo system experience.
3. Q: Can I connect an external AM antenna to the WR-50P?
   A: The WR-50P does not have a provision for an external AM antenna. However, the built-in ferrite AM antenna provides excellent reception for most situations.
4. Q: Can I adjust the display brightness?
   A: Yes, you can adjust the display brightness by pressing the 'Dimmer' button on the remote control. There are four levels of brightness, including one that turns the display off completely.

Q: Is the added / secondary speaker really worth the extra $100 - $150 over the original model?
A: According to customer reviews, the sound quality is noticeably better with the additional speaker. It's recommended to purchase both for a true stereo experience.

Q: Do I need to connect the second speaker to the main unit with cable or do the two entities communicate via Bluetooth / wifi as well?
A: The second speaker must be connected via wire. A six-foot cable is included with the package. The system can work in mono without the second speaker.

Q: Is there a USB charging port? I want a clock radio that has Bluetooth, AM/FM, a clock display, USB charging for two devices (fast charge a plus).
A: No, this radio does not have a USB charging port.

Q: Does Bluetooth transmit or just receive? I have a nice Marshall Bluetooth speaker and I'm looking for a radio to play on it.
A: Bluetooth on the radio is designed as an input source, not output. However, the radio does have a headphone jack and adaptors are available that allow you to connect a wireless speaker or headphones.

Q: What are the dimensions of these units?
A: The receiver and auxiliary speaker are both 5" wide, 8" high, and 7" deep. Please note that this is a tabletop unit.

Q: Can the "alarm timer" be set to go off at a specific time of day or is it set to a specific number of hours?
A: The alarm timer has settings for "once", weekdays, and weekends. You can set two alarms at different times.

Q: Why don't they show the back of this radio?
A: The back of the radio is not shown in product images. However, customers have shared photos in their reviews.

Q: How to set the station for RDS? The manual is not clear.
A: You can't set the station for RDS. Either the station broadcasts RDS information or it doesn't. If you have the radio set to an FM station and your default setting is the time of day, press the info button on the remote four times to display RDS information.

Q: Slave speaker sold separately?
A: Yes, the slave speaker is sold separately.

Q: Can I stream music from my iPhone onto this? If yes, what is the setup required?
A: Yes, you can stream music from your iPhone via Bluetooth. After initial pairing, simply switch to the Bluetooth source to start listening wirelessly.