JBL EON208P Portable All-in-One 2-way PA System User Manual

Table of Contents

1. Introduction
2. Package Contents
3. Setting Up the System
4. Mixer Controls and Inputs
5. Bluetooth Connectivity
6. Troubleshooting Tips
7. Frequently Asked Questions

1. Introduction

Welcome to the JBL EON208P Portable All-in-One 2-way PA System. This user manual will guide you through the setup and operation of your new PA system. The EON208P is designed for ease of use and portability, making it perfect for musicians, DJs, teachers, and anyone in need of a compact, portable sound system.

2. Package Contents

• EON208P (2 speakers with self-powered mixer)
• AKG microphone
• Speaker cables
• Power cable
• User's guide

3. Setting Up the System

1. Place the speakers on a stable surface or mount them on speaker stands.
2. Connect the speaker cables from the mixer to the speakers.
3. Connect the power cable to the mixer and plug it into an AC outlet.
4. Connect your audio sources and microphones to the mixer using the appropriate inputs.
5. Turn on the system by pressing the power button on the mixer.
6. Adjust the volume, EQ, and reverb settings as needed.

4. Mixer Controls and Inputs

The EON208P features an 8-channel mixer with a variety of inputs and controls:

• Channels 1-4: Combo ¼” / XLR inputs with volume, reverb, treble, and bass control. Phantom power and Hi-Z input available on channels 1-3.
• Channels 5-6: Stereo pair of ¼” balanced TRS inputs or stereo RCA inputs.
• Channels 7-8: Stereo 3.5mm input for mobile devices or Bluetooth streaming audio.
• Outputs: ¼” balanced TRS, RCA jacks (x1 pair), 3.5mm jack (x1).

5. Bluetooth Connectivity

To stream audio from your mobile device via Bluetooth, follow these steps:

1. Turn on Bluetooth on your mobile device.
2. Press the Bluetooth button on the mixer to enter pairing mode. The Bluetooth LED will flash.
3. Select "EON208P" from the list of available devices on your mobile device.
4. Once connected, the Bluetooth LED will remain solid. You can now stream audio from your device to the EON208P.

6. Troubleshooting Tips

1. If there is no sound, check that the power cable is connected and the system is turned on. Also, check that the volume controls are not set to the minimum.
2. If you experience feedback, reduce the volume or reposition the speakers and microphones to avoid direct sound reflection.
3. If you cannot connect to Bluetooth, ensure that your mobile device's Bluetooth is turned on and that the EON208P is in pairing mode. If necessary, unpair and reconnect the device.
4. If the sound is distorted, reduce the input gain or volume on the mixer.

7. Frequently Asked Questions

Q: Can I use the EON208P with a guitar?

A: Yes, you can connect a guitar to channels 1-4 using a 1/4" instrument cable. Channels 1-3 also support Hi-Z input for electric guitars and basses.

Q: Can I connect a subwoofer to the EON208P?

A: Yes, you can connect a powered subwoofer to the 1/4" balanced TRS output on the mixer.

Q: How long is the speaker cable included with the system?

A: The included speaker cables are approximately 6 meters (20 feet) long.

Q: Can I use the EON208P outdoors?

A: The EON208P is not waterproof, but it can be used outdoors in dry conditions. Avoid exposing the system to moisture or direct sunlight.

Q: How do I charge my mobile device using the USB port on the mixer?

A: The USB port on the mixer is for firmware updates only and cannot be used for charging devices.

Product FAQ:

Q: What is the model number of the AKG microphone that comes with it?
A: The manufacturer did not specify the model number of the AKG microphone that comes with the JBL EON208P Portable All-in-One 2-way PA System. However, if it does not come with a microphone, you should complain to the seller. It is recommended to get a decent model from Audio Technica, Shure, Sennheiser, Rode, Samson or other reputable brands.

Q: Can I connect a Yamaha mix channel to this JBL EON208P?
A: Yes, you can connect a mixer to any audio speaker and it should work.

Q: Will it work for a live band?
A: Yes, the JBL EON208P Portable All-in-One 2-way PA System is suitable for live bands. It has been designed for musicians, singers, DJs, teachers, or anyone in need of a truly compact and portable sound system. It features an 8-channel mixer and two powered speakers with 8" woofers that deliver crisp, deep bass response, clear, unmuddied mids and extraordinary detail and balance in high frequencies.

Q: What kind of microphones work with this?
A: Any dynamic microphone with an XLR or 1/4” Phone plug will be fine. It does not support phantom power. However, it does not come with a microphone.

Q: How much power must be supplied to it?
A: The JBL EON208P Portable All-in-One 2-way PA System has a claimed output power of 300W. Therefore, the input power should be equal to or greater than the output power. Depending on the voltage applied to the final stage (amplification block), there will be a specific amount of amps drawn by the amp to be able to output 300W at most (with some THD). It is recommended to consider doubling the input power to be on the safe side. So, 600W from an outlet should suffice.

Q: What kind of jack is the subwoofer?
A: The JBL EON208P Portable All-in-One 2-way PA System does not have a subwoofer. The speakers are equipped with quarter inch jacks.