Pyle Marine Bluetooth Stereo Radio - PLMRB29W User Manual

Table of Contents

1. Package Contents
2. Installation
3. Front Panel Controls
4. Pairing with Bluetooth Devices
5. Playing Media
6. Hands-Free Calling
7. Troubleshooting Tips
8. Frequently Asked Questions

1. Package Contents

• Pyle Marine Bluetooth Stereo Radio - PLMRB29W (White)
• Remote Control
• Wiring Harness
• User Manual

2. Installation

Before installation, ensure that your boat's electrical system is turned off. Mount the PLMRB29W in a single DIN-sized opening on your boat's dashboard or console, following the manufacturer's guidelines for proper mounting. Connect the wiring harness to the corresponding connections on the back of the unit, and then connect the other end of the harness to your boat's electrical system and speakers.

3. Front Panel Controls

The front panel of the PLMRB29W features the following controls:

• Power Button
• Volume Knob
• Menu/Mode Button
• Play/Pause Button
• Previous Track Button
• Next Track Button
• Call Answer/End Button
• Auxiliary Input
• USB/SD Card Slot
• LCD Display

4. Pairing with Bluetooth Devices

To pair your Bluetooth-enabled device with the PLMRB29W, follow these steps:

1. Turn on your device's Bluetooth and set it to discoverable mode.
2. Press the Menu/Mode button on the PLMRB29W until the Bluetooth mode is activated.
3. Select "Pyle" from the list of available devices on your phone or tablet.
4. Once connected, the LCD display will show the Bluetooth symbol and the name of the connected device.

5. Playing Media

The PLMRB29W supports playback from various sources, including Bluetooth, USB, SD card, and auxiliary input. To switch between these sources, press the Menu/Mode button until the desired source is displayed on the LCD screen. Use the Play/Pause, Previous Track, and Next Track buttons to control playback.

6. Hands-Free Calling

To make and receive hands-free calls using the PLMRB29W, ensure that your phone is connected via Bluetooth. Incoming calls will be displayed on the LCD screen, and you can answer or end calls using the Call Answer/End button. To redial the last dialed number, press and hold the Call Answer/End button.

7. Troubleshooting Tips

• If the PLMRB29W does not power on, check the wiring connections and ensure that your boat's electrical system is functioning correctly.
• If you experience poor radio reception, check the connection of the antenna and ensure it is properly grounded.
• If you cannot connect to Bluetooth, ensure that your device is discoverable and within range. If necessary, unpair and re-pair the device.
• If the sound quality is poor, adjust the EQ settings using the front panel controls or remote control.

8. Frequently Asked Questions

1. Is the PLMRB29W waterproof?
   The PLMRB29W is designed for marine use and can withstand exposure to water and moisture. However, it is not fully waterproof and should not be submerged.
2. Does the PLMRB29W have a CD player?
   No, the PLMRB29W does not have a CD player. It supports Bluetooth, USB, SD card, and auxiliary input for media playback.
3. Can I connect an external amplifier to the PLMRB29W?
   Yes, the PLMRB29W has RCA line-out jacks in the rear, allowing you to connect an external amplifier for additional power and improved sound quality.
4. Is the remote control waterproof?
   The remote control included with the PLMRB29W is not waterproof and should be kept away from water and moisture.
5. Can I use the PLMRB29W with my smartphone or tablet?
   Yes, the PLMRB29W can be connected to smartphones and tablets via Bluetooth, allowing you to stream music and make hands-free calls.

Q: What is the power output of the Pyle Marine Bluetooth Stereo Radio?
A: The Pyle Marine Bluetooth Stereo Radio features a 300 Watt (75W x 4) peak power output.

Q: Can I stream audio from my Bluetooth enabled device with this receiver?
A: Yes, you can stream audio directly from your hand-held A2DP Bluetooth enabled device like iPhone, android, smartphones, iPad, tablets and play internet radio services like Pandora through your speakers with the help of this receiver.

Q: Does this boat indash console stereo receiver have a built-in mic for answering calls?
A: Yes, this boat indash console stereo receiver has a built-in mic for answering calls and the telephone number is displayed in the LCD panel digital display. It also has a call answer / end button and redial last dialed number function.

Q: What are the features of the digital front panel of this headunit receiver?
A: This headunit receiver features digital LCD and crisp button and knob controls, Aux-in, USB / SD slot and AM FM radio, located in the front panel. It also has RCA line out jacks in the rear.

Q: What is the size of this in dash console receiver system?
A: This 12 volt easy to mount in dash console receiver system has a single DIN universal standard size design in a white color for a stylish look. It replaces single din size radios.

Q: Is there a warranty for this product?
A: Yes, there is a 1 year limited warranty provided by the manufacturer.

Q: Can I adjust the volume of different speakers with this receiver?
A: It has a fade function to my knowledge.

Q: Do I need an amplifier for this product?
A: That will depend on the specs of the speaker that you will use. The unit can hold up to 300 Watt (75W x 4 channel).

Q: Can I use the 4 RCA outputs on the back of the head-unit with no amp and bypass the speaker-wire,wire harness connection?
A: Yes, you can use the 4 RCA outputs on the back of the head-unit with no amp and bypass the speaker-wire,wire harness connection.

Q: What is included in the package?
A: The package includes a remote control, wiring harness, and instructions.