APC 600VA UPS Battery Backup & Surge Protector


Brand: APC
Model Number: BE600M1

User Manual for APC UPS Battery Backup and Surge Protector, BE600M1

Getting Started

  • Unpack your APC UPS unit and ensure that the following items are included: APC UPS, user manual, USB cable, and a 12V battery (pre-installed).
  • Place the UPS in a cool, dry location with at least 2 inches of space on all sides for proper airflow.
  • For wall-mounting, use the template provided and ensure that the mounting surface can support the weight of the UPS.

Installation

  1. Connect the battery by opening the battery compartment and connecting the battery connector to the UPS terminal. Close the compartment.
  2. Plug the UPS power cord into a wall outlet using the right-angle 3-prong plug (NEMA 5-15P).
  3. Turn on the UPS by pressing the power button. The green LED will illuminate.
  4. Plug your electronic devices into the UPS outlets. Use the battery backup & surge protector outlets for critical devices like a computer or router. Use the surge protection only outlets for non-critical devices.
  5. For USB charging, connect your device to the USB port using a compatible cable.
  6. If you have a Windows PC, connect it to the UPS using the provided USB cable and install the Powerchute software for additional functionality. Mac users can configure the 'Energy Saver' settings for similar functionality.

Operation

Once your devices are connected and the UPS is turned on, it will provide surge protection and battery backup during power interruptions. The UPS will beep to indicate that it is on battery power. You can silence the alarm by pressing the power button.

Troubleshooting Tips

  • No Power to Devices: Ensure the UPS is plugged in and turned on. Check if the circuit breaker has tripped and reset if necessary.
  • UPS Beeping Continuously: This may indicate that the UPS is overloaded. Unplug some devices and try again.
  • Short Battery Runtime: The battery may be discharged. Allow the UPS to recharge for at least 16 hours. If the problem persists, the battery may need to be replaced.
  • UPS Not Recognized by Software: Check the USB connection and ensure that the software is correctly installed. Try reinstalling the Powerchute software or configuring the 'Energy Saver' settings again.

Frequently Asked Questions (FAQs)

Can the battery be replaced?

Yes, the battery in the APC UPS is replaceable. The genuine APC replacement battery model is APCRBC154.

Is this UPS suitable for sensitive electronics?

The BE600M1 does not provide pure sine wave output, which some sensitive electronics may require. Please check your device's compatibility before connecting it to the UPS.

How many outlets does this UPS have?

The UPS has a total of 7 outlets: 5 with battery backup & surge protection and 2 with surge protection only.

Can I use this UPS with a pellet stove?

It is not recommended to use this UPS with a pellet stove as it does not provide pure sine wave power, which is often required for such appliances.

What devices can I charge with the USB port?

The USB charging port (1.5A) is designed for cell phones and small portable electronics.

What is the voltage rating of this UPS?

The APC UPS operates at 120 Volts.

How long will the UPS power my devices?

The runtime depends on the power consumption of the connected devices. For an estimate, refer to the APC runtime chart specific to the BE600M1 model.

Can this UPS be used with a Mac?

Yes, Mac users can utilize the native 'Energy Saver' settings to manage the UPS functionality.

What is the weight and dimensions of the UPS?

The UPS weighs 7.5 pounds and measures 10.79 x 4.13 x 5.47 inches.

Is there a warranty for this UPS?

APC typically offers a warranty for their UPS devices. Please refer to the included documentation or APC's official website for specific warranty information.

For further assistance, please contact APC's customer support or refer to the detailed user manual provided with your UPS.


FAQ [continued]

**Product FAQ: APC UPS Battery Backup and Surge Protector, 600VA/300 Watts BE600M1**

**Q: What are the key features of the APC UPS BE600M1?**
A: The APC UPS BE600M1 provides 600VA/330W battery backup power, 7 outlets (5 with battery backup & surge protection, 2 with surge protection only), 1 USB charger port (1.5A), replaceable battery, and Powerchute UPS management compatibility.

**Q: What devices can I power with the APC UPS BE600M1?**
A: You can power essential devices like routers, modems, computers, gaming consoles, and small electronics during power outages using the APC UPS BE600M1.

**Q: Is the APC UPS BE600M1 suitable for powering larger appliances like pellet stoves?**
A: The APC UPS BE600M1 may not be compatible with larger appliances requiring pure sine wave power. It is recommended for smaller electronics and home networking devices.

**Q: How can I replace the battery in the APC UPS BE600M1?**
A: You can easily replace the battery with a genuine APC replacement battery model APCRBC154, which is sold separately.

**Q: What operating systems are compatible with the Powerchute UPS management software for the APC UPS BE600M1?**
A: The Powerchute UPS management software is compatible with Windows 10, Windows 11 Pro, and Mac OS using native "Energy Saver" settings.

**Q: Can I wall-mount the APC UPS BE600M1?**
A: Yes, the APC UPS BE600M1 is wall-mountable for convenient placement in your setup.

**Q: What is the warranty on the APC UPS BE600M1?**
A: For warranty information, please refer to the manufacturer's warranty policy or contact APC customer support.

**Q: How can I check if my device is compatible with the APC UPS BE600M1 before purchasing?**
A: It is recommended to review your device's specifications and power requirements to ensure compatibility with the APC UPS BE600M1. If you have specific compatibility concerns, please consult with a professional electrician or contact APC customer support for assistance.

**Q: Can I use the USB charger port on the APC UPS BE600M1 to charge my cell phone during a power outage?**
A: Yes, the USB charger port on the APC UPS BE600M1 (1.5A) is designed for charging cell phones and small portable electronics during power outages.
Installation Manual (PDF)
Installation Manual (PDF)
Instructions for Use (IFU) (PDF)
Instructions for Use (IFU) (PDF)
User Manual (PDF)
User Manual (PDF)
User Guide (PDF)
User Guide (PDF)


Specifications

BrandAPC
ManufacturerAPC
Model NumberBE600M1
CategoryElectronics > Computers & Accessories > Computer Accessories & Peripherals > Uninterruptible Power Supply (UPS)
Product Dimensions10.79 x 4.13 x 5.47 inches
Item Weight7.5 pounds
ASINB01FWAZEIU
Item model numberBE600M1
Batteries1 12V batteries required. (included)
Customer Reviews4.5 4.5 out of 5 stars 34,826 ratings 4.5 out of 5 stars
Best Sellers Rank#1 in Computer Uninterruptible Power Supply Units
Is Discontinued By ManufacturerNo
Date First AvailableJune 10, 2016
Country of OriginPhilippines
Battery Cell CompositionSealed Lead Acid
Product Dimensions4.13"D x 10.79"W x 5.47"H
Voltage120 Volts
ColorBlack
Weight7.5 pounds
Dimensions10.79 x 4.13 x 5.47 inches
First AvailableJune 10, 2016



The content on this website is generated using the GPT (Generative Pre-trained Transformer) model, an artificial intelligence language model developed by OpenAI. While this technology is advanced and can produce highly coherent text, it is important for users to understand that the information and opinions expressed on this site may not be accurate, reliable, or up-to-date.
Please be aware that the GPT-generated content may include errors, inaccuracies, or misleading information, and should not be relied upon as a sole source of information or guidance. The website owner and its affiliates disclaim all liability for any loss, damage, or inconvenience that may arise from the use or reliance on the content provided.
We encourage users to verify any critical information obtained from this site with other reliable sources, and to consult with a qualified professional before making any decisions based on the content.
By using this website, you acknowledge and agree to these limitations and understand that the GPT-generated content is provided "as is" without any warranties or guarantees of any kind.