Product Overview

The Goodyear GOD1000 is a hydraulic floor jack designed for lifting vehicles up to 2 tonnes in weight. It features a rotating 360° lifting seat and a high-caliber steel frame, providing a safe and reliable lifting solution for most cars and light trucks.

Specifications

• Brand: Goodyear
• Model Number: GOD1000
• Category: Auto et Moto > Outils et dépannage > Équipements garage et atelier > Élévateurs, grues d'atelier et crics > Crics de levage
• Manufacturer: Abc Parts Spain, S.L
• Weight: 9 Kilograms
• Dimensions: 14 x 45.5 x 21 cm
• Color: Blue
• Lifting Range: 127 – 330 mm

Instructions for Use

1. Position the jack under the vehicle at the designated lifting point as per the vehicle's owner manual.
2. Ensure that the jack's saddle is correctly aligned with the lifting point.
3. Rotate the handle clockwise to close the release valve, ensuring the jack is prepared to lift.
4. Pump the handle up and down to raise the saddle towards the vehicle's chassis.
5. Once the vehicle is lifted to the desired height, you can proceed with your maintenance tasks.
6. To lower the vehicle, slowly rotate the handle counter-clockwise to open the release valve and allow the jack to descend smoothly.
7. Remove the jack from under the vehicle once it is completely lowered and the weight is off the jack.

Troubleshooting Tips

• Jack will not lift: Ensure the release valve is fully closed by turning the handle clockwise.
• Jack lowers unexpectedly: Check the release valve is not partially open; if it is, tighten the handle.
• Noisy wheels: Lubricate the wheel bearings with a suitable lubricant.
• Jack seems unstable: Verify that the jack is placed on a flat, stable surface and the lifting point is centered on the saddle.
• Handle is loose: If the handle has excessive play, wrap a strip of tape around the joint to reduce slack.

Frequently Asked Questions (FAQs)

Q: Can this jack lift SUVs or heavier vehicles?

A: The jack is rated for vehicles up to 2 tonnes. For SUVs, it may be necessary to use an additional support to achieve the required height.

Q: Does the jack come with a rubber pad?

A: No, it does not come with a rubber pad. It is recommended to purchase one separately to protect the vehicle's chassis.

Q: Is the jack suitable for professional garage use?

A: The jack is designed for both professional and home garage use, but always assess the weight requirements for your specific needs.

Q: The jack's handle has a lot of play, is this normal?

A: Some play is normal, but if it seems excessive, you can add a strip of tape to reduce the slack.

Q: What should I do if the jack does not lower when I turn the handle?

A: Ensure the release valve is turned fully counter-clockwise. If the issue persists, there may be a need for maintenance or repair.