Pyle 8" 4 Bluetooth Flush Mount In-Wall In-Ceiling 2-Way Speaker System User Manual

Table of Contents

1. Package Contents
2. Installation
3. Connecting the Speakers
4. Bluetooth Setup
5. Troubleshooting
6. Frequently Asked Questions

1. Package Contents

• (4) 8" Speakers
• (4) Removable Round Speaker Grills
• (4) Removable Square Speaker Grills
• Speaker Connection Wire
• Bluetooth Control Receiver
• Power Supply
• Cut-out Size Template

2. Installation

1. Choose the desired location for your in-wall or in-ceiling speakers.
2. Use the included cut-out size template to mark the speaker hole on the wall or ceiling.
3. Carefully cut the marked hole using a drywall saw or utility knife.
4. Insert the speaker into the hole, ensuring the spring-loaded fixing clips are retracted.
5. Once the speaker is in place, tighten the fixing clips by turning the screws on the front of the speaker. This will secure the speaker to the wall or ceiling.
6. Choose the desired grill (round or square) and attach it to the speaker.

3. Connecting the Speakers

1. Connect the speaker connection wire to the quick connect spring-loaded speaker terminals on the back of each speaker.
2. Connect the other end of the speaker connection wire to the Bluetooth control receiver.
3. Plug the power supply into the Bluetooth control receiver and connect it to a power outlet.

4. Bluetooth Setup

1. Turn on the Bluetooth control receiver by pressing the power button.
2. Enable Bluetooth on your smartphone, tablet, or computer.
3. Search for available Bluetooth devices and select the Pyle speaker system from the list.
4. Once connected, you can start streaming music wirelessly from your device to the speakers.

5. Troubleshooting

• No sound: Check all connections and ensure the Bluetooth control receiver is powered on. Make sure your device is connected to the speaker system via Bluetooth.
• Poor sound quality: Ensure the speaker connection wires are securely connected to the terminals. Check the Bluetooth connection and move your device closer to the Bluetooth control receiver if necessary.
• Bluetooth connection issues: Make sure your device's Bluetooth is enabled and within range of the speaker system. Try restarting your device and the Bluetooth control receiver.

6. Frequently Asked Questions

Can I connect multiple devices to the speaker system at the same time?

No, the Bluetooth control receiver can only connect to one device at a time. To switch devices, disconnect the current device and connect the new device.

Can I use these speakers outdoors?

These speakers are designed for indoor use only and are not waterproof or weather-resistant.

Do I need a separate amplifier to use these speakers?

No, the included Bluetooth control receiver doubles as a 4-channel sound processing digital amplifier, so no separate amplifier is required.

Can I use these speakers without Bluetooth?

Yes, you can connect the speakers directly to a non-Bluetooth audio source using the speaker connection wire. However, you will lose the wireless functionality and the built-in amplifier provided by the Bluetooth control receiver.

Q: Is there any other accessories needed for this system to work with just a Bluetooth device i.e. Phone? Want to use them in an office to stream music.
A: No, everything is included and no other accessories are needed.

Q: How many watts is the amplifier?
A: The amplifier has a maximum power output of 250 watts.

Q: I see a lot of conflicting information in the Q&A and reviews. For the PDICBT286, how many watts is each speaker and how many total watts is the amp?
A: Each speaker has a maximum power output of 250 watts, and the amp also has a maximum power output of 250 watts.

Q: Would these work in a drop ceiling attached to a different amp with a receiver?
A: Yes, they can work in any ceiling as long as they can be mounted with the clips. If you don't care for the Bluetooth function, you can directly connect them to your A/V receiver.

Q: Do these link together wirelessly? How far apart can you place them?
A: No, they do not link wirelessly. They are linked via speaker wires and connected to the 4-channel Bluetooth controller box. The distance between them depends on the length of the speaker wires used.

Q: Can I connect this to a laptop through a USB Bluetooth transmitter?
A: Yes, it will definitely connect to a Bluetooth-enabled laptop.

Q: Ecobee Alexa smart thermostat connecting speakers? How do you do it? Do I need a different amp?
A: Our sincere apologies, but it is not compatible with Alexa devices.

Q: Is this stereo, surround sound 4, or strictly mono?
A: This is a stereo speaker. However, if the sound that you're using is in mono format, the speaker will produce mono sound.

Q: I'm trying to connect these speakers to a Link Bluetooth apparatus (JBL Link Bluetooth 300), can I do that?
A: Yes, you can connect these speakers to any Bluetooth-enabled device, including the JBL Link Bluetooth 300.

Q: Do I need an amp for the speakers?
A: No, these speakers come with a 4-channel digital amplifier.