Pyle Ceiling Speakers PDICLE35 User Manual

Table of Contents

1. Introduction
2. Package Contents
3. Speaker Installation
4. LED Light Installation
5. Troubleshooting Tips
6. Frequently Asked Questions

1. Introduction

Thank you for purchasing the Pyle Ceiling Speakers PDICLE35. This in-wall/in-ceiling dual 3.5-inch speaker system features high-compliance tweeters, 2-way flush mount, and aluminum frame speakers with built-in LED lights. The surround sound system and advanced design make these speakers perfect for any custom audio application on virtually any flat surface.

2. Package Contents

• 2 x Pyle Ceiling Speakers PDICLE35
• 1 x Cut-out Template
• 1 x User Manual

3. Speaker Installation

1. Choose the desired location for the speakers on your wall or ceiling.
2. Use the included cut-out template to mark the hole for the speaker.
3. Cut the hole carefully using a drywall saw or a similar cutting tool.
4. Route the speaker wires from your audio source to the speaker location, ensuring that you have enough length to connect the speakers.
5. Strip the ends of the speaker wires and connect them to the speaker terminals, ensuring proper polarity (positive to positive, negative to negative).
6. Insert the speaker into the hole and secure it in place using the integrated spring-loaded clips. The clips will automatically grip the wall or ceiling when the speaker is pushed in.
7. Attach the stain-resistant grill cover to the speaker.

4. LED Light Installation

The Pyle Ceiling Speakers PDICLE35 come with built-in LED lights for added functionality. To install the LED lights, follow these steps:

1. Connect the LED light wires to a compatible power source or LED driver (not included).
2. Ensure that the LED light wires are properly connected and secured.
3. Test the LED lights by turning on the power source or LED driver. The LED lights should illuminate with a brightness of 650 lumens.

5. Troubleshooting Tips

1. If the speakers do not produce sound, check the speaker wire connections and ensure that they are properly connected and secure.
2. If the LED lights do not turn on, check the connections to the power source or LED driver and ensure that they are properly connected and secure.
3. If the sound quality is poor, check the speaker placement and ensure that they are installed at the optimal location for your room.
4. If the grill cover does not attach properly, ensure that the speaker is fully inserted into the hole and the spring-loaded clips are engaged.

6. Frequently Asked Questions

Q: What is the maximum power output of the PDICLE35 speakers?

A: The maximum power output of the PDICLE35 speakers is 140 watts.

Q: What is the impedance of the PDICLE35 speakers?

A: The impedance of the PDICLE35 speakers is 8 ohms.

Q: What is the sensitivity of the PDICLE35 speakers?

A: The sensitivity of the PDICLE35 speakers is 90 dB.

Q: What is the frequency response of the PDICLE35 speakers?

A: The frequency response of the PDICLE35 speakers is 60-20 kHz.

Q: What is the cutout diameter for the PDICLE35 speakers?

A: The cutout diameter for the PDICLE35 speakers is 4.2 inches.

Q: Can I connect the LED lights to a dimmer switch?

A: Yes, the built-in LED lights can be connected to a compatible dimmer switch (not included) to control the brightness.

Q: What is the maximum power output of the Pyle Ceiling Speakers, In-Wall / In-Ceiling Dual 3.5-Inch Speaker System?
A: The maximum power output is 140 watts.

Q: Are the LED lights dimmable with the right wall dimmer?
A: No, the LED lights are not dimmable. They can only be turned on or off.

Q: Does the light come on only when the system is powered?
A: Yes, the light comes on when the system is powered.

Q: Do they come with a Bluetooth adapter or does it have to be bought separately?
A: No, they do not come with a Bluetooth adapter. It has to be bought separately.

Q: Can I wire the speakers so Bluetooth is always on?
A: No, you cannot wire the speakers so Bluetooth is always on. The unit needs to be connected to a wall outlet.

Q: Do the LED lights need their own power wires ran to run the LED? Does the speaker work without using the LED light feature?
A: The LED lights do not need their own power wires to run. The speaker works without using the LED light feature.

Q: I need a separate power supply, what do you recommend?
A: You need an amp, not a power supply.