Beyerdynamic DT 1990 Pro Open Studio Headphones User Manual

Introduction

Thank you for choosing the Beyerdynamic DT 1990 Pro Open Studio Headphones. These headphones are designed for mixing and mastering applications, providing high-resolution sound and maximum wear comfort. This manual will guide you through the setup, usage, and troubleshooting of your new headphones.

Package Contents

• DT 1990 Pro Open Studio Headphones
• 2 pairs of velour ear pads (analytical and well-balanced)
• 3m straight cable
• 5m coiled cable
• Premium hard case

Setting Up Your Headphones

1. Choose the ear pads that best suit your sound preference. The analytical ear pads provide a more detailed sound, while the well-balanced ear pads offer a more even sound profile.
2. Attach the chosen ear pads to the headphones by aligning the notches on the pads with the corresponding notches on the headphones. Press the pads gently until they click into place.
3. Select the cable you prefer to use (straight or coiled) and connect the mini-XLR connector to the headphones. Ensure the connector is securely locked in place.
4. Plug the other end of the cable into your audio source (e.g., audio interface, mixer, or portable device).
5. Adjust the headband for a comfortable fit by sliding the ear cups up or down.

Using Your Headphones

With the headphones properly set up, you can now use them for mixing, mastering, or critical listening. The open design of the DT 1990 Pro provides a natural and spatial sound, making them an excellent choice for professional applications.

Troubleshooting Tips

If you encounter any issues while using your DT 1990 Pro headphones, try the following troubleshooting tips:

• No sound or low volume: Ensure the cable is securely connected to both the headphones and the audio source. Check the volume level on your audio source and adjust if necessary.
• Unbalanced sound or channel imbalance: Check the cable connections and ensure they are firmly in place. If the issue persists, try using the other cable included in the package. If the problem still exists, contact Beyerdynamic customer support for further assistance.
• Discomfort or poor fit: Adjust the headband to find a more comfortable fit. If necessary, try swapping the ear pads to see if the other pair provides a better fit.

Frequently Asked Questions

What is the difference between the analytical and well-balanced ear pads?

The analytical ear pads provide a more detailed sound, while the well-balanced ear pads offer a more even sound profile. Both pairs are included in the package, so you can choose the one that best suits your listening preferences.

Can I use the DT 1990 Pro headphones with my mobile device?

Yes, you can use the DT 1990 Pro headphones with your mobile device. However, due to their 250-ohm impedance, the volume level may be lower than with other headphones. A headphone amplifier may be required for optimal performance.

Are replacement cables available for purchase?

Yes, replacement cables can be purchased from Beyerdynamic or authorized dealers. Both straight and coiled cables are available.

Can I use these headphones for gaming?

While the DT 1990 Pro headphones are primarily designed for professional audio applications, they can also be used for gaming. The open design provides a spacious soundstage, which can enhance your gaming experience.

For additional support or inquiries, please contact Beyerdynamic customer service.

Q: Can I use these with my phone?
A: Yes, you can use these headphones with your phone. However, to fully enjoy the high-quality sound, it is recommended to use a portable amplifier as the headphones have high impedance.

Q: Can you hook it up to vmoda microphone using an adapter?
A: Yes, you can use a mini xlr to 3.5mm female adapter to connect a vmoda boom mic to the headphones.

Q: Are both cables equipped with a 1/4" plug or is one 1/8"?
A: The headphones include a 3.5mm connector along with a screw-on 1/4" adapter.

Q: How do these compare to the hifi sundra and do they have good bass?
A: These headphones have better sound stage and imaging compared to the hifi sundra. The bass is fuller and more impactful. It is recommended to use Dekoni Elite Velour or Perforated Sheepskin pads to tame the 8k Hz peak.

Q: Has anyone used these with astro a 40 mix amp at all?
A: Yes, these headphones work great with an astro a40 mix amp. However, you will need a different microphone.

Q: Do these have more bass/treble than HD660s? Those are too muffled for my ears.
A: It is not known whether these headphones have more bass/treble than HD660s. However, the DT 1990 PRO headphones are known for their excellent sound quality.

Q: How comfortable are these for glasses wearers?
A: These headphones are super comfortable regardless of whether you wear glasses or not.

Q: Are these a decent endgame sounding headphone over expensive high-end headphones like the HD800?
A: These headphones are considered excellent in terms of sound quality and overall performance. While they may not be as expensive as some high-end headphones like the HD800, they are still able to produce excellent sounding music and overall sound.

Q: What is the frequency response of this item?
A: The frequency response of these headphones is 5-40,000 Hz. However, it is important to note that published frequency data should only be used as a guide as many factors determine how we hear audio. Beyerdynamic DT-1990 PRO headphones are critically accurate headphones that reproduce subtleties, anomalies, and errors that exist in the recording process.