IBL-1 Cat6 Ethernet Port and 1 Gold-plated Cable TV Coax F Type Port Wall Plate User Manual

Package Contents

• 1 x IBL-1 Cat6 Ethernet Port and 1 Gold-plated Cable TV Coax F Type Port Wall Plate

Installation

1. Turn off power to the electrical box where the wall plate will be installed.
2. Remove the existing wall plate if there is one.
3. Feed the Ethernet and coax cables through the wall and into the electrical box.
4. Attach the Ethernet cable to the back of the IBL-1 wall plate by plugging it into the female-to-female LAN connector.
5. Attach the coax cable to the back of the IBL-1 wall plate by screwing it onto the gold-plated F-Type connector.
6. Align the IBL-1 wall plate with the electrical box and secure it in place using the provided screws.
7. Turn the power back on to the electrical box.

Troubleshooting Tips

• If the Ethernet connection is not working, check that the cable is properly plugged into the LAN connector on both ends.
• If the coax connection is not working, ensure that the cable is securely screwed onto the F-Type connector on both ends.
• Inspect the cables for any damages or kinks that may be affecting the connection.
• Try using a different Ethernet or coax cable to rule out any issues with the cables themselves.

Frequently Asked Questions

Can I use this wall plate with CAT5e cables?

Yes, the IBL-1 wall plate is compatible with both CAT6 and CAT5e cables.

Is this wall plate compatible with keystone wall plates, patch panels, or surface mount boxes?

Yes, the IBL-1 wall plate is designed to be compatible with keystone wall plates, patch panels, and surface mount boxes.

Do I need a punch-down tool to install this wall plate?

No, a punch-down tool is not required for installation. The wall plate features female-to-female LAN connectors, allowing you to simply plug in your Ethernet cables.

What are the dimensions and weight of this wall plate?

The IBL-1 wall plate measures 4.5 x 2.7 x 0.8 inches and weighs 0.8 ounces.

Is this wall plate discontinued by the manufacturer?

No, the IBL-1 wall plate is not discontinued by the manufacturer and is still available for purchase.

FAQ:

Q: Is the RJ45 jack removable?
A: Yes, it is removable.

Q: Can I directly plug a Cat6 molded cable into the back of this plate or do I need to splice my Cat6 and join it to the connector on the plate?
A: You can plug it in directly.

Q: Would a Cat5e cable work fine with this wall plate?
A: Absolutely, a Cat5e cable will work with this wall plate.

Q: Is it waterproof so that it can be installed on an exterior wall?
A: Sincerely doubt it. But it's well-made.

Q: Do I need to terminate my Ethernet cable in order to use this wall plate?
A: No, just plug the Ethernet into the back of the plate and then you will need another Ethernet cable for the front to plug into your equipment.

Q: Does this come with a keystone?
A: No, you just can plug in on both sides a cable with a male connector.

Q: Is the faceplate standard or midsize in size?
A: It’s standard in size.

Q: Do the screw holes line up with those on a single gang electrical box?
A: Yes, they line up. The plate matches a single gang box.

Q: Does this come in brown?
A: Sorry, we have only ones in white.

Q: Can the bottom port be used for the coaxial cable that a modem needs?
A: Yes, it can be used for the coaxial female-to-female cable.

Overall, this IBL-1 Cat6 Ethernet Port and 1 Gold-plated Cable TV Coax F Type Port Wall Plate is an easy-to-use product that allows you to extend your LAN cord for longer lengths and gain LAN access. It works with CAT6, CAT5e cables or can be used with a "keystone" wallplate, patch panels, or surface mount boxes. The gold-plated contacts and easy snap-in retaining clip ensure a secure and corrosion-free connection. The product is standard for keystone wallplates and blank patch panels. The product dimensions are 4.5 x 2.7 x 0.8 inches, and it weighs 0.8 ounces. It is available only in white color.